B60/C60 Series Heat Sink System Ohmite introduces the powerful B60/ C60 series heatsink with cam clip (Pat. Pending) or custom mounting. This series offers flexible, high performance and compact heat sink with exchangeable cam clip system for TO-220, TO-247, and TO-264 devices. The built in lip is provided for mounting ease. The optional B series can be tapped for popular Ohmite resistors or other devices. These powerful heat sinks can be thruhole soldered as a single or dual unit. The dual unit can be mated to a 60mm fan for greater thermal performance. It is the ideal type of heat sink for high power density and small size (3U or 4U) electronic packaging with forced convection. S ERIE S S P E C I F I C ATI O N S Heatsink Part Number C60-075-VE C60-075-AE B60-075-VE B60-075-AE Surface Area (in2 / mm2) 177 / 114,300 Weight Length L (oz / g) (mm) 5.7 / 163 75 177 / 114,300 5.7 / 163 consult factory for alternate lengths and clip combinations 75 c h a r a c t e r i s t i cs Aluminum Alloy 6063-T5 or Equivalent with either degreased or black anodized finish. Spring Clip Music Wire, Per ASTM A228 with bright nickel plating Solder Foot Cold-rolled Steel, Per ASTM A-366 with pure tin over copper strike. RoHS compliant. Fan 60mm fan with 4 self-tapping M3 screws Interface Thermal For improvement, use thermal joint compound, 0.005 Grafoil (TGon Resistance 800 by Laird), or phase change material (Hi-Flow by Bergquist) Insulator (Optional) Sil-Pad 900-S, K6 800-S and K10 by Bergquist Heat Dissipation 2 Thermal Resistance from Case to Ambient per Device (oC/watts) Heat Sink 1.5 4 devices 1 2 devices 0.5 0 20 30 40 Fan Flow Rate (cfm) 50 (continued) 166 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] B60/C60 Series Heat Sink System d i m e ns i ons 2.58" (65.5mm) 2.53" (64.2mm) 2x 0.079" (2mm) 2.07" (52.7mm) 0.079" (2mm) 1.19"* (30.2mm) 2.48" (63mm) 2.95" 75.0mm 2.79" (71.0mm) 2.95" (75.0mm) C60 B60 2.63" (66.7mm) 2.78" REF (70.7mm) 0.31" (8mm) 0.12" (3mm) 0.12" (3mm) 1.61" (41mm) 0.17" (4.3mm) 0.32" (8.1mm) 0.17" (4.3mm) 1.97" (50mm) 0.47" (12mm) "W" T247 0.63" (16.1mm) T264 0.80" (20.2mm) 0.43" (11mm) 0.78" (19.8mm) W +0.12" (+3.0mm) W 6x ø 0.07" pth (1.8mm) L L – 0.16" (0.16mm) LAND PATTERN Y X 1.39" REF (35.3mm) 2x 0.08" (2.0mm) 2x ø 0.18" 0.11" pth (4.06mm) (2.8mm) how to order Heatsink Clip RoHS compliant C60XX-058-AE Series B = without lip C = with lip 1.61 (41mm) 0.08" (2mm) Clip Dimensions NOTE: Due to possible screw torquing on long extrusions, Customer should check for coplanarity prior to final assembly or soldering. 1.97"* (50mm) 0.16" (3.9mm) 0.049" (1.25mm) 0.080" (2.03mm) 2.74" REF (69.5mm) Hole Length pattern (mm) (optional) Finish A = black anodized V = degreased CLA-T247-21E Clip series Standard Device type RoHS T247 = TO-247 configuration compliant T264 = TO-264 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 167