G4SB60 THRU G4SB80 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 600 to 800V 4.0A Current: Features GSIB-3S Glass passivated chip junction Ideal for printed circuit board High surge current capability High case dielectric strength Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Symbol G4SB60 G4SB80 units Maximum repetitive peak reverse voltage Vrrm 600 800 V Maximum RMS voltage Vrms 420 560 V Maximum DC blocking voltage Vdc 600 800 V Maximum average forward Rectified output current at Tc = 108℃ with heatsink Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 2.0A If(av) 4.0 A Ifsm 160 A Vf 0.95 V I2t Rating for fusing (t < 10ms) 80 110 A2Sec Ir 10.0 250 µA (Note1) (Note2) Rth(ja) Rth(jc) 30.0 5.5 ℃/W Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Maximum DC reverse current at rated DC blocking voltage per leg Ta = 25°C Ta = 125°C Maximum thermal resistance per leg Note: 1. junction to ambient, without heatsink 2. junction to case, with heatsink Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G4SB60 THRU G4SB80 Rev.A1 www.gulfsemi.com