Frequency D64L4Y5 32-pin dip 4 - pole filter Datasheet

D64 & DP64 Series
32-Pin DIP
4 - Pole Filters
1.0 Hz to 100 kHZ
Fixed Frequency
Description
The D64 and DP64 Series of small 4-pole fixedfrequency, precision active filters provide high
performance linear active filtering in a compact 32pin DIP package, with a broad range of corner
frequencies and a choice of transfer functions.
Individual D64 filters can serve in low-pass or highpass applications (DP64, low-pass only) or be
combined to create custom band-pass or bandreject filters. These fully self-contained units
require no external components or adjustments.
Each model comes factory tuned to a user-specified
corner frequency between 1 Hz and 100 kHz (DP64,
1 Hz to 5 kHz) and operate with low total harmonic
distortion over a wide dynamic input voltage range
from non-critical +/-5V to +/-18V power supplies.
Features/Benefits:
• Low harmonic distortion and wide signal-to-noise
ratio
• Compact 1.8"L x 0.8"W x 0.3"H minimizes board
space requirements.
• Plug-in ready-to-use, reducing engineering design
and manufacturing cycle time.
• Factory tuned, no external clocks or adjustments
needed
• Broad range of transfer characteristics and corner
frequencies to meet a wide range of applications.
Applications
• Anti-alias filtering
• Data acquisition systems
• Communication systems and electronics
• Medical electronics equipment and research
• Aerospace, navigation and sonar applications
• Sound and vibration testing
• Acoustic and vibration analysis and control
• Noise elimination
• Signal reconstruction
Available Low-Pass Models: . . . . . . . . . . .Page
D64L4B & DP64L4B 4-pole Butterworth . . . . . .2
D64L4L & DP64L4L
4-pole Bessel . . . . . . . . . .2
D64L4Y2 & DP64L4Y2 4-pole Cheby
(0.2 dB Ripple) . . . . . . . . .2
D64L4Y5 & DP64L4Y5 4-pole Cheby
(0.5 dB Ripple) . . . . . . . . .2
Available
D64H4B
D64H4Y2
D64H4Y5
High-Pass Models:
4-pole Butterworth . . . . . . . . . . . . . . . .3
4-pole Cheby (0.2 dB Ripple) . . . . . . . .3
4-pole Cheby (0.5 dB Ripple) . . . . . . . .3
General Specifications:
Pin-out/package data & ordering information . . . .4
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
D64 & DP64 Series
4-Pole
Low-Pass Filters
Fixed Frequency
Model
D64L4B & DP64L4B
D64L4L & DP64L4L
D64L4Y2 & DP64L4Y2
D64L4Y5 & DP64L4Y5
Transfer Function
4-Pole, Butterworth
4-Pole, Bessel
4-Pole, Chebychev,
4-Pole, Chebychev,
0.5 dB Ripple
Size
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
Range fc
D64
DP64
1 Hz to 100 kHz
1 Hz to 5 kHz
1 Hz to 100 kHz
1 Hz to 5 kHz
1 Hz to 100 kHz
1 Hz to 5 kHz
1 Hz to 100 kHz
1 Hz to 5 kHz
Theoretical Transfer
Characteristics
Appendix A
Page 7
Appendix A
Page 2
Appendix A
Page 12
Appendix A
Page 15
Passband Ripple
0.0 dB
0.0 dB
0.20 dB
0.50 dB
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
Stopband
Attenuation Rate
24 dB/octave
24 dB/octave
24 dB/octave
24 dB/octave
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°C
-3dB
-180°
Filter Attenuation
0.67 dB
3.01 dB
30.0 dB
40.0 dB
0.80 fc
1.00 fc
2.37 fc
3.16 fc
0 - 0.8 fc
± 2° max.
± 1° typ.
± 3° max.
± 1.5° typ.
0 - fc
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3 dB max.
± 0.15 dB typ.
0 - fc
Product Specifications
(theoretical)
DC Voltage Gain
(non-inverting)
(theoretical)
Phase Match1
± 1% max.
0.8 fc - 1.0 fc
Amplitude Accuracy
(theoretical)
0 - 0.8 fc
Total Harmonic
Distortion @ 1 kHz
D64
DP64
Wide Band Noise
fc
± 0.01% /°C
-3dB
-121°
± 1% max.
1.86 dB
3.01 dB
30.0 dB
40.0 dB
0.80 fc
1.00 fc
3.50 fc
4.72 fc
± 2° max.
± 1° typ.
fc
± 0.01% /°C
-3dB
-231°
± 1% max.
-0.20 dB
3.01 dB
30.0 dB
40.0 dB
0.80 fc
1.00 fc
1.89 fc
2.46 fc
0 - 0.8 fc
<-100 dB
<-80 dB
0 - 0.8 fc
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3 dB max.
± 0.15 dB typ.
<-100 dB
<-80 dB
± 1% max.
-0.43 dB
3.01 dB
30.0 dB
40.0 dB
0.80 fc
1.00 fc
1.80 fc
2.33 fc
± 2° max. 0 - 0.8 fc
± 1° typ.
± 3° max. 0.8 fc - 1.0 fc
± 1.5° typ.
0.8 fc - 1.0 fc
± 0.2 dB max.
± 0.1 dB typ.
fc
± 0.01% /°C
-3dB
-245°
0 - 0.8 fc
0.8 - 1.0 fc
<-88 dB
<-80 dB
± 2° max.
± 1° typ.
± 3° max.
± 1.5° typ.
± 0.2 dB max.
± 0.1 dB typ.
± 0.3 dB max.
± 0.15 dB typ.
<-88 dB
<-80 dB
200 µVrms typ.
200 µVrms typ.
200 µVrms typ.
200 µVrms typ.
50 µVrms typ.
50 µVrms typ.
50 µVrms typ.
50 µVrms typ.
FMA-01S
FMA-01S
FMA-01S
FMA-01S
(5 Hz - 2 MHz)
Narrow Band Noise
(20 Hz - 100 kHz)
Filter Mounting
Assembly
1. Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
2
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
D64 & DP64 Series
4-Pole
High-Pass Filters
Fixed Frequency
Model
D64H4B
64H4Y2
D64H4Y5
Transfer Function
4-Pole, Butterworth
4-Pole, Chebychev,
0.2 dB Ripple
4-Pole, Chebychev,
0.5 dB Ripple
Size
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
1.8” x 0.8” x 0.3”
Range fc
D64
DP64
1 Hz to 100 kHz
Not Available
1 Hz to 100 kHz
Not Available
1 Hz to 100 kHz
Not Available
Theoretical Transfer
Characteristics
Appendix A
Page 27
Appendix A
Page 31
Appendix A
Page 33
Passband Ripple
0.0 dB
0.20 dB
0.50 dB
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
Power Bandwidth
120 kHz
120 kHz
120 kHz
Small Signal Bandwidth
(-6dB) 1 MHz
(-6dB) 1 MHz
(-6dB) 1 MHz
Stopband
Attenuation Rate
24 dB/octave
24 dB/octave
24 dB/octave
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°C
-3dB
-180°
Filter Attenuation
40 dB
30 dB
3.01 dB
0.02 dB
Product Specifications
(theoretical)
Voltage Gain
(non-inverting)
(theoretical)
Phase Match1
Amplitude Accuracy
(theoretical)
0.31 fc
0.42 fc
1.00 fc
2.00 fc
fc - 100 kHz
± 3° max.
± 1.5° typ.
fc
± 0.01% /°C
-3dB
-231°
± 1% max.
40 dB
30 dB
3.01 dB
-0.07 dB
0.41 fc
0.53 fc
1.00 fc
2.00 fc
fc - 100 kHz
± 3° max.
± 1.5° typ.
fc
± 0.01% /°C
-3dB
-245°
± 1% max.
40 dB
30 dB
3.01 dB
-0.25 dB
0.43 fc
0.56 fc
1.00 fc
2.00 fc
fc - 100 kHz
± 3° max.
± 1.5° typ.
± 0.30 dB max. 1.0 - 1.25 fc ± 0.30 dB max. 1.0 - 1.25 fc ± 0.30 dB max.
± 0.15 dB typ.
± 0.15 dB typ.
± 0.15 dB typ.
1.25 fc - 100 kHz± 0.20 dB max. 1.25 fc - 100 kHz ± 0.20 dB max. 1.25 fc - 100 kHz ± 0.20 dB max.
± 0.10 dB typ.
± 0.10 dB typ.
± 0.10 dB typ.
1.0 - 1.25 fc
Total Harmonic
Distortion @ 1 kHz
D64
Wide Band Noise
± 1% max.
<-88 dB
<-88dB
<-88 dB
400 µVrms typ.
400 µVrms typ.
400 µVrms typ.
100 µVrms typ.
100 µVrms typ.
100 µVrms typ.
FMA-01S
FMA-01S
FMA-01S
(5 Hz - 2 MHz)
Narrow Band Noise
(20 Hz - 100 kHz)
Filter Mounting
Assembly
1. Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
3
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
D64 & DP64 Series
Pin-Out and Package Data
Ordering Information
Specification
(25°C and Vs ± 15 Vdc)
1
Analog Input Characteristics
Impedance
10 kΩ min.
Voltage Range
± 10 Vpeak
Max. Safe Voltage
± Vs
0.80
Side View
0.025 dia.
Analog Output Characteristics
Impedance(Closed Loop)
1 Ω typ.
10 Ω max.
Linear Operating Range
± 10 V
2
Maximum Current
± 2 mA
3
02 mV typ.
Offset Voltage
10 mV max.
Offset Temp. Coeff.
50 µV / °C
Front View
0.30
0.15 (min)
0.80
0.70
OUT
-VS OS4
+VS
Bottom View
GND
-
IN
1.55
1.65
0.45
0.55
15 Vdc
5 to ± 18 Vdc
18 Vdc
12.5 mA typ.
20 mA max.
3.5 mA typ.
5 mA max.
0.15
0.10
0.00
0.00
±
±
±
±
±
±
±
DP64
Temperature
Operating
Storage
1.80
1.80
Power Supply (±V)
Rated Voltage
Operating Range
Maximum Safe Voltage
Quiescent Current D64
All dimensions are in inches
All case dimensions ± 0.01"
Filter Mounting Assembly-See FMA-01A
Ordering Information
0 to + 70 °C
- 25 to + 85 °C
Notes:
1. Input and output signal voltage referenced to supply
common.
2. Output is short circuit protected to common.
DO NOT CONNECT TO ±Vs.
3. Adjustable to zero.
Filter Type
Transfer Function
L - Low Pass
H - High Pass
B - Butterworth
L - Bessel
Y2 - 0.2 Ripple Chebychev
Y5 - 0.5 Ripple Chebychev
D64L4B-849 Hz
DC Offset Adjustment
± Vs
Do not connect
if trim is not
required.
20 k Ω
(Cermet)
OS
Power Level
D – Standard Power
DP – Low Power
4. Units operate with or with out offset pin connected.
- Vs
5
- 3 dB Corner Frequency
e.g., 849 Hz
2.50 kHz
33.3 kHz
5. How to Specify Corner Frequency:
Corner frequencies are specified by attaching a three digit frequency designator to the basic
model number. Corner frequencies can range from 1.00 Hz to 100 kHz.
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
IN-00D64-01
4
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
Low-Pass
4-Pole
Appendix A
Bessel
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.336
0.10
-0.028
-12.1
.336
0.20
-0.111
-24.2
.336
0.30
-0.251
-36.3
.336
0.40
-0.448
-48.4
.336
0.50
-0.705
-60.6
.336
0.60
-1.02
-72.7
.336
0.70
-1.41
-84.8
.336
0.80
-1.86
-96.8
.335
0.85
-2.11
-103
.334
0.90
-2.40
-109
.333
0.95
-2.69
-115
.332
1.00
-3.01
-121
.330
1.10
-3.71
-133
.325
1.20
-4.51
-144
.318
1.30
-5.39
-156
.308
-166
1.40
-6.37
.295
-177
1.50
-7.42
.280
-187
1.60
-8.54
.263
-195
1.70
-9.71
.246
-204
1.80
-10.9
.228
1.90
-12.2
-212
.211
2.00
-13.4
-219
.194
2.25
-16.5
-235
.158
2.50
-19.5
-248
.129
2.75
-22.4
-259
.107
-267
3.00
-25.1
.089
-275
3.25
-27.6
.076
-281
3.50
-30.0
.065
-291
4.00
-34.4
.049
-305
5.00
-41.9
.031
6.00
-315
.021
-48.1
7.00
-321
.016
-53.4
8.00
-326
.012
-58.0
9.00
-330
.009
-62.0
10.0
-333
.008
-65.7
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
2
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
Low-Pass
4-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.416
0.10
0.00
-15.0
.418
0.20
0.00
-30.1
.423
0.30
-0.00
-45.5
.433
0.40
-0.003
-61.4
.449
0.50
-0.017
-78.0
.474
0.60
-0.072
-95.7
.511
0.70
-0.243
-115
.558
0.80
-0.674
-136
.604
0.85
-1.047
-147
.619
0.90
-1.555
-158
.622
0.95
-2.21
-169
.612
1.00
-3.01
-180
.588
1.10
-4.97
-200
.513
1.20
-7.24
-217
.427
1.30
-9.62
-231
.350
1.40
-12.0
-242
.289
1.50
-14.3
-252
.241
1.60
-16.4
-260
.204
1.70
-18.5
-266
.175
1.80
-20.5
-272
.152
1.90
-22.3
-277
.134
2.00
-24.1
-282
.119
2.25
-28.2
-291
.091
2.50
-31.8
-299
.072
2.75
-35.1
-304
.059
3.00
-38.2
-309
.049
3.25
-41.0
-313
.041
3.50
-43.5
-317
.035
4.00
-48.2
-322
.027
5.00
-55.9
-330
.017
6.00
-62.3
-335
.012
7.00
-67.6
-339
.009
8.00
-72.2
-341
.007
9.00
-76.3
-343
.005
-80.0
10.0
-345
.004
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
2.0
1.0
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Frequency(f/fc)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
7
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
Low-Pass
4-Pole, 0.2 dB Ripple
Appendix A
Chebychev
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.000
0.00
.478
0.10
0.039
-17.3
.487
0.20
0.129
-35.2
.509
0.30
0.195
-54.0
.533
0.40
0.174
-73.4
.547
0.50
0.074
-93.2
.553
0.000
0.60
-113
.575
0.074
0.70
-135
.654
0.199
0.80
-162
.836
0.063
0.85
-178
.947
-0.443
0.90
-196
1.02
.989
0.95
-214
-1.47
.873
1.00
-231
-3.01
.583
1.10
-257
-6.89
.385
1.20
-274
-10.8
.271
1.30
-286
-14.5
1.40
-17.7
-294
.202
1.50
-20.7
-300
.158
1.60
-23.4
-306
.128
1.70
-25.8
-310
.107
1.80
-28.1
-313
.090
-30.2
1.90
-316
.078
-32.2
2.00
-319
.068
-36.7
-324
2.25
.051
-40.6
-328
2.50
.039
-44.1
-331
2.75
.032
3.00
-47.3
-334
.026
3.25
-50.2
-336
.022
3.50
-52.8
-338
.018
4.00
-57.6
-341
.014
5.00
-65.5
-345
.009
-71.9
6.00
-347
.006
-77.3
7.00
-349
.004
-82.0
8.00
-351
.003
-86.1
9.00
-352
.003
-89.8
10.0
-352
.002
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 810.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
2.0
1.0
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
12
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
Low-Pass
4-Pole, 0.5 dB Ripple
Appendix A
Chebychev
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.476
0.10
0.087
-17.3
.492
0.20
0.295
-35.7
.533
0.30
0.474
-55.7
.577
0.40
0.463
-76.9
.596
0.50
0.248
-98.2
.583
0.60
0.025
-119
.578
0.70
0.072
-141
.647
0.80
0.432
-168
.881
0.85
0.482
-185
1.06
0.90
0.062
-205
1.18
0.95
-1.12
-226
1.13
1.00
-3.01
-245
.946
1.10
-7.61
-272
.559
1.20
-12.0
-288
.345
1.30
-15.9
-298
.235
1.40
-19.3
-305
.173
1.50
-22.4
-311
.134
1.60
-25.1
-315
.108
1.70
-27.6
-318
.089
1.80
-29.9
-321
.075
-32.1
1.90
-324
.065
-34.1
2.00
-326
.057
-38.6
2.25
-301
.042
-42.6
2.50
-334
.033
-46.1
2.75
-336
.026
3.00
-49.3
-339
.021
3.25
-52.2
-340
.018
3.50
-54.9
-342
.015
4.00
-59.7
-344
.011
5.00
-67.6
-347
.007
6.00
-74.0
-350
.005
7.00
-79.4
-351
.004
8.00
-84.1
-352
.003
9.00
-88.2
-353
.002
10.0
-91.9
-354
.002
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
2
3 4 5 6 78
1.0
10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
2.0
1.0
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
15
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
High-Pass
4-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-80.0
345
.418
-55.9
0.20
330
.423
-41.8
0.30
314
.433
-31.8
0.40
299
.449
-24.1
0.50
282
.474
0.60
-17.8
264
.511
0.70
-12.6
245
.558
0.80
-8.43
224
.604
0.85
-6.69
213
.619
202
0.90
-5.22
.622
0.95
-3.99
191
.612
1.00
-3.01
180
.588
1.20
-0.908
143
.427
.289
1.40
-0.285
118
.204
1.60
-0.100
100
1.80
-0.039
87.6
.152
2.00
-0.017
78.0
.119
61.4
2.50
-0.003
.072
-0.001
50.7
3.00
.049
0.00
37.8
4.00
.027
5.00
0.00
30.1
.017
6.00
0.00
25.1
.012
7.00
0.00
21.4
.009
0.00
8.00
18.8
.007
0.00
9.00
16.7
.005
10.0
0.00
15.0
.004
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
27
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
High-Pass
4-Pole, 0.2 dB Ripple
Appendix A
Frequency Response
0
Amp (dB)
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-89.8
352
.212
-65.1
0.20
345
.218
-51.1
0.30
337
.228
-40.6
0.40
328
.245
-32.2
0.50
319
.272
-25.0
0.60
308
.314
-18.6
0.70
296
.383
-12.7
0.80
280
.500
-7.34
0.90
259
.686
-3.01
1.00
231
.873
.633
1.20
172
.140
.275
1.50
128
.031
.197
1.70
111
.003
.138
2.00
93.2
.074
.088
2.50
73.4
.174
3.00
.200
60.4
.060
4.00
.170
44.5
.033
5.00
.129
35.2
.020
.098
6.00
29.2
.014
7.00
.076
24.9
.010
.060
8.00
21.7
.008
.048
9.00
19.3
.006
.040
10.0
17.3
.005
Chebychev
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 8 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
31 \
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
High-Pass
4-Pole, 0.5 dB Ripple
Appendix A
Chebychev
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-91.9
354
.174
-67.6
0.20
347
.179
-53.1
0.30
341
.188
-42.6
0.40
334
.203
-34.1
0.50
326
.226
-26.8
0.60
317
.263
-20.2
0.70
307
.326
-14.0
0.80
293
.440
-8.13
0.90
274
.651
-3.01
1.00
245
.946
.693
1.20
179
.500
.271
1.50
133
.014
.199
1.70
117
.043
.146
2.00
98.2
.249
.095
2.50
76.9
.469
3.00
.498
62.7
.065
4.00
.401
45.5
.035
5.00
.296
35.7
.021
.221
6.00
29.4
.014
7.00
.169
25.0
.010
.133
8.00
21.8
.008
.107
9.00
19.3
.006
.088
10.0
17.3
.005
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
2
3 4 5 6 78
1.0
10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
33
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
Similar pages