NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Features General Description ■ 0.9V to 3.6V VCC supply operation The NC7WV07 is a dual buffer with open drain output from Fairchild's Ultra Low Power-A series of TinyLogic. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V to 3.6V VCC) and applications that require more drive and speed than the TinyLogic ULP series, but still offer best in class low power operation. ■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V ■ Extremely High Speed tPD ■ ■ ■ ■ ■ – 1.0 ns typ for 2.7V to 3.6V VCC – 1.2 ns typ for 2.3V to 2.7V VCC – 2.0 ns typ for 1.65V to 1.95V VCC – 3.2 ns typ for 1.4V to 1.6V VCC – 6.0 ns typ for 1.1V to 1.3V VCC – 13.0 ns typ for 0.9V VCC Power-Off high impedance inputs and outputs High Static Drive (IOH/IOL) – ±24 mA @ 3.00V VCC – ±18 mA @ 2.30V VCC – ±6 mA @ 1.65V VCC – ±4 mA @ 1.4V VCC – ±2 mA @ 1.1V VCC – ±0.1 mA @ 0.9V VCC Uses patented Quiet Series noise/EMI reduction circuitry Ultra small MicroPak leadfree package Ultra low dynamic power The NC7WV07 is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. Ordering Information Order Number Package Number Package Code Top Mark NC7WV07P6X MAA06A V07 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7WV07L6X MAC06A BC 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As Battery Life vs. VCC Supply Voltage 700 600 ULP (SA) 500 Battery Life 400 (Days) 300 ULP-A (SV) 200 UHS (SZ) 100 0 0.9 1.2 1.5 1.8 2.5 3.3 5.0 VCC Supply Voltage TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (Vbattery • Ibattery • 0.9) / (Pdevice) / 24hrs/day Where, Pdevice = (ICC • VCC) + (CPD + CL) • VCC2 • f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15pF load. TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ and Quiet Series™ are trademarks of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation NC7WV07 Rev. 1.0.0 1 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) June 2006 IEEE/IEC A1 1 Y2 A2 Connection Diagrams Pin Descriptions Pin Assignment for SC70 A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 Pin Name Description A1, A2 Data Inputs Y1, Y2 Outputs Function Table Y=A (Top View) Pin One Orientation Diagram (Top View) Y1 AAA Input Output A Y L L H H H = HIGH Logic Level L = LOW Logic Level Pin One AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 (Top Through View) 2 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Logic Symbol Symbol Parameter Rating VCC Supply Voltage −0.5V to +4.6V VIN DC Input Voltage −0.5V to +4.6V VOUT DC Output Voltage HIGH or LOW State(1) VCC = 0V IIK DC Input Diode Current @ VIN < 0V ±50mA IOK DC Output Diode Current VOUT < 0V VOUT > VCC −50mA +50mA IOH/IOL DC Output Source/Sink Current ±50mA ICC or Ground DC VCC or Ground Current per Supply Pin ±50mA TSTG Storage Temperature Range −0.5V to VCC +0.5V −0.5V to +4.6V −65°C to +150°C Recommended Operating Conditions(2) Symbol Parameter Rating VCC Supply Voltage 0.9V to 3.6V VIN Input Voltage 0V to 3.6V VOUT Output Voltage VCC = 0.0V HIGH or LOW State 0V to 3.6V 0V to VCC IOH/IOL Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 1.95V VCC = 1.4V to 1.6V VCC = 1.1V to 1.3V VCC = 0.9V TA Free Air Operating Temperature ∆t / ∆V Minimum Input Edge Rate @ VIN = 0.8V to 2.0V, VCC = 3.0V ±24mA ±18mA ±6mA ±4mA ±2mA ±0.1mA −40°C to +85°C 10ns/V Notes: 1. IO Absolute Maximum Rating must be observed. 2. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. TA = +25°C Symbol VIH VIL VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage LOW Level Output Voltage IOL = 100µA VCC (V) −40°C to +85°C Min. Max. Min. Max. Units V 0.90 0.65 x VCC – 0.65 x VCC – 1.10 ≤ VCC ≤ 1.30 0.65 x VCC – 0.65 x VCC – 1.40 ≤ VCC ≤ 1.60 0.65 x VCC – 0.65 x VCC – 1.65 ≤ VCC ≤ 1.95 0.65 x VCC – 0.65 x VCC – 2.30 ≤ VCC < 2.70 1.6 – 1.6 – 2.70 ≤ VCC ≤ 3.60 2.0 – 2.0 – 0.90 – 0.35 x VCC – 0.35 x VCC 1.10 ≤ VCC ≤ 1.30 – 0.35 x VCC – 0.35 x VCC 1.40 ≤ VCC ≤ 1.60 – 0.35 x VCC – 0.35 x VCC 1.65 ≤ VCC ≤ 1.95 – 0.35 x VCC – 0.35 x VCC 2.30 ≤ VCC < 2.70 – 0.7 – 0.7 2.70 ≤ VCC ≤ 3.60 – 0.8 – 0.8 0.90 – 0.1 – 0.1 V 1.10 ≤ VCC ≤ 1.30 – 0.1 – 0.1 1.40 ≤ VCC ≤ 1.60 – 0.2 – 0.2 1.65 ≤ VCC ≤ 1.95 – 0.2 – 0.2 2.30 ≤ VCC < 2.70 – 0.2 – 0.2 2.70 ≤ VCC ≤ 3.60 – 0.2 – 0.2 IOL = 2mA 1.10 ≤ VCC ≤ 1.30 – 0.25 x VCC – 0.25 x VCC IOL = 4mA 1.40 ≤ VCC ≤ 1.60 – 0.25 x VCC – 0.25 x VCC IOL = 6mA 1.65 ≤ VCC ≤ 1.95 – 0.3 – 0.3 IOL = 12mA 2.30 ≤ VCC < 2.70 – 0.4 – 0.4 2.70 ≤ VCC ≤ 3.60 – 0.4 – 0.4 IOL = 18mA 2.30 ≤ VCC < 2.70 – 0.6 – 0.6 2.70 ≤ VCC ≤ 3.60 – 0.4 – 0.4 IOL = 24mA 2.70 ≤ VCC ≤ 3.60 – 0.55 – 0.55 0.90 to 3.60 – ±0.1 – ±0.5 µA 0 – 0.5 – 0.5 µA µA IIN Input Leakage 0 ≤ VI ≤ 3.6V Current IOFF Power Off Leakage Current 0 ≤ (VI, VO) ≤ 3.6V ICC Quiescent Supply Current VI = VCC or GND 0.90 to 3.60 – 0.9 – 0.9 VCC ≤ VI ≤ 3.6V 0.90 to 3.60 – – – ±0.9 4 NC7WV07 Rev. 1.0.0 V www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) DC Electrical Characteristics TA = +25°C Symbol tPZL, tPLZ Parameter Propagation Delay CIN Input Capacitance COUT Output Capacitance CPD Power Dissipation Capacitance −40°C to +85°C Conditions VCC (V) Min. Typ. Max. CL = 15pF, RU = RD 1MΩ 0.90 13 CL = 15pF, RU = RD 2kΩ 1.10 ≤ VCC ≤ 1.30 2.0 6.0 15.0 1.0 18.6 1.40 ≤ VCC ≤ 1.60 1.0 3.2 8.7 1.0 9.7 CL = 30pF, 1.65 ≤ VCC ≤ 1.95 RU = RD 500Ω 2.30 ≤ V < 2.70 CC 2.70 ≤ VCC ≤ 3.60 1.0 2.0 6.0 1.0 6.8 0.7 1.2 3.6 0.6 4.7 VI = 0V or VCC, f = 10MHz Min. Max. Figure Units Number ns 0.5 1.0 3.3 0.4 4.0 0 – 2.0 – – – 0 – 6.5 – – – pF 0.90 to 3.60 – 10 – – – pF Figure 1 Figure 2 pF AC Loading and Waveforms VCC OPEN tPLH, tPHL tPZH, tPHZ 6.0V or VCC x 2 tPZL, tPLZ 1000Ω TEST GND DUT SIGNAL 30pF 1000Ω Figure 1. AC Test Circuit Test Switch tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V; VCC × 2 at VCC = 0.9V − 2.7V tf = 3ns VCC tr = 3ns 90% 90% Input Vmi Vmi tW 10% 10% tPZL tPLZ GND VOH VCC Output 50% VX VCC Figure 2. Waveform for Inverting and Non-Inverting Functions VCC Symbol 3.3V ± 0.3V Vmi 1.5V Vx VOL + 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V VCC / 2 VCC / 2 VOL + 0.15V VOL + 0.15V 5 NC7WV07 Rev. 1.0.0 1.2 V ± 0.1V 0.9V VCC / 2 VCC / 2 VCC / 2 VOL + 0.1V VOL + 0.1V VOL + 0.1V www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) AC Electrical Characteristics Tape Format for SC70 Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status P6X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) 6 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification Tape Format for MicroPak Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status L6X Leader (Start End) 125 (typ) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension millimeters 7 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size A B C D N W1 W2 W3 8mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) 0.567 (14.40) W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification (Continued) NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Physical Dimensions millimeters unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 9 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Physical Dimensions millimeters unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 10 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® FASTr™ ActiveArray™ FPS™ Bottomless™ FRFET™ Build it Now™ GlobalOptoisolator™ CoolFET™ GTO™ CROSSVOLT™ HiSeC™ DOME™ I2C™ EcoSPARK™ i-Lo™ E2CMOS™ ImpliedDisconnect™ EnSigna™ IntelliMAX™ FACT™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 11 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) TRADEMARKS