ES2A THRU ES2J 星合电子 Surface Mount Efficient Fast Recovery Rectifier ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Voltage Range 50 to 600 V Current 2.0 Ampere SMB/DO-214AA Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Glass passivated chip Mechanical Data Case: Molded plastic SMB/DO-214AA Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-750 method 2026 Polarity:Color band denotes cathode Mounting position: Any Weight: 0.093 gram .130(3.30) .155(3.94) .075(1.91) .083(2.11) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .002(.051) .008(.203) .030(0.76) .060(1.52) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL ES2A ES2B ES2D ES2G ES2J UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V VDC 50 100 200 400 600 V CHARACTERISTIC Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TA=90 C IF(AV) 2.0 A IFSM 60 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 2.0 A VF 0.9 1.25 o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Maximum Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range uA 100 uA 25 20 R JA 55 TJ, TSTG -55 to + 150 pF o ＴＥＬ：０５３６－２２１０３５９ CW o C 1 ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ nS 50 50 NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to ambient. ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． V 5.0 o Maximum DC Reverse Current @TJ=25 C 1.5 ＱＱ：４６４７６８０１７ ES2A THRU ES2J 星合电子 Surface Mount Efficient Fast Recovery Rectifier ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Voltage Range 50 to 600 V Current 2.0 Ampere FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.0 1.6 1.2 0.8 0.4 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 50 40 30 20 10 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 1000 1.0 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 ES2A-ES2D ES2G ES2J 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 o TJ=125 C 100 10 o TJ=25 C 1 0.1 0 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 1000 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． 100 ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７