Power Inductors - Shielded CTSLF0628 Series From 4.7 µH to 100 µH Not shown at actual size. RoHS ctparts.com SPECIFICATIONS Parts are available in ±20% tolerance only. CTSLF0628TF Please specify “F” for RoHS compliant. Inductance (µH) L Test Freq. (kHz) CTSLF0628T_-4R7M CTSLF0628T_-6R8M 4.7 6.8 1.0 1.0 CTSLF0628T_-100M CTSLF0628T_-150M CTSLF0628T_-220M CTSLF0628T_-330M CTSLF0628T_-470M CTSLF0628T_-680M 10 15 22 33 47 68 CTSLF0628T_-101M 100 Part Number Compliant Available DCR ±20% Ω) (Ω Rated DC (A) Itemp Max. (A) 0.0284 0.0354 1.6 1.5 2.5 2.2 1.0 1.0 1.0 1.0 1.0 1.0 0.0532 0.0745 0.104 0.148 0.21 0.29 1.3 1.0 0.77 0.69 0.59 0.50 1.8 1.4 1.3 1.1 0.92 0.78 1.0 0.43 0.42 0.64 PHYSICAL DIMENSIONS Size A B C D E Typ. mm inches F Typ. 6.0±0.2 6.0±0.2 2.8±0.2 1.5 2.0±0.1 3.0 0.24±0.008 0.24±0.008 0.11±0.008 0.059 0.08±0.004 0.118 A F C CHARACTERISTICS Description: SMD (shielded) power inductor Applications: For power source circuits, low profile type DC to DC converters, DC to AC inverters etc. Operating Temperature: -40°C to +85°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4284A at 1.0 kHz. Rated DC Current: Value obtained when DC current flows and the initial value of inductance has fallen by 30% Itemp Current: Value obtained when current flows and the temperature has risen to 25°C Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: Magnetically shielded. RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. XXX B D PAD LAYOUT Unit: mm 1.5 4.0 1.5 2.2 Technologies 06.23.06 CENTRAL E Marking (Inductance code) Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice