SPICE MODEL: SDA006 SDA006 Lead-free Green DATA BUS TRANSIENT SUPPRESSOR/3-PHASE FULL WAVE BRIDGE RECTIFIER NEW PRODUCT Features · · · · · Fast Switching Speed SOT-363 For 3-Phase Full Wave Bridge Rectification, or 3 Dataline Rail Clamp B C Lead Free By Design/RoHS Compliant (Note 3) "Green" Device (Note 4) IEC Compatibility · · A Ultra-Small Surface Mount Package G H (Note 5) K 61000-4-2 (ESD) Air-10kV Contact-8kV M 61000-4-5 (Surge) 8x20ms, 14.5 Amperes J AC3 DL3 Mechanical Data · · D / / F L / DC+ DC+ VCC VCC Case: SOT-363 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 (Note 4) · · Moisture Sensitivity: Level 1 per J-STD-020C · · · Ordering Information, See Page 3 / DL1 AC1 Terminals: Finish ¾ Matte Tin annealed over Alloy 42 Leadframe. Solderable per MIL-STD-202, Method 208 / GND DC- / DL2 AC2 Dim Min Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal E 0.30 0.40 G 1.80 2.20 H 1.80 2.20 J ¾ 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.25 a 0° 8° All Dimensions in mm TOP VIEW Marking: JAC (See Page 3) Weight: 0.006 grams (approximate) Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Non-Repetitive Peak Reverse Voltage Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol Value Unit VRM 100 V VRRM VRWM VR 75 V VR(RMS) 53 V Forward Continuous Current (Note 1) IFM 215 mA Non-Repetitive Peak Forward Surge Current @ t = 1.0ms @ t = 1.0ms @ t = 1.0s IFSM 2.0 1.0 0.5 A VC 16 V RMS Reverse Voltage Clamping Voltage (Note 6) @ Ipp = 14.5A 8x20ms Waveform Power Dissipation (Note 1) Thermal Resistance Junction to Ambient Air (Note 1) Power Dissipation (Note 2) Thermal Resistance Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes: Pd 200 mW RqJA 625 °C/W Pd 300 mW RqJA 417 °C/W Tj , TSTG -65 to +150 °C 1. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. Device mounted on Alumina PCB, 0.4 inch x 0.3 inch x 0.024 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 3. No purposefully added lead. 4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 5. Tested with VCC connected to Ground to simulate appropriate VCC decoupling to Ground. 6. Reference to VCC or Ground. DS30559 Rev. 3 - 2 1 of 4 www.diodes.com SDA006 ã Diodes Incorporated @ TA = 25°C unless otherwise specified Characteristic Reverse Breakdown Voltage (Note 7) Symbol Min Typ Max Unit V(BR)R 75 ¾ ¾ V IR = 2.5mA Test Condition V IF = 1.0mA IF = 10mA IF = 50mA IF = 150mA Forward Voltage (Note 7) VF ¾ ¾ 0.715 0.855 1.0 1.25 Reverse Current (Note 7) IR ¾ ¾ 2.5 50 30 25 mA mA mA nA VR = 75V VR = 75V, Tj = 150°C VR = 25V, Tj = 150°C VR = 20V Junction Capacitance (per element) CJ ¾ ¾ 2.0 pF VR = 0V, f = 1.0MHz Capacitance, Between I/O Lines (I/O1 & I/O2) CLL ¾ 35 ¾ pF VR = 0V, f = 1.0MHz Capacitance, Between I/O Line and Ground CLG ¾ 11 ¾ pF VR = 0V, f = 1.0MHz trr ¾ ¾ 4.0 ns IF = IR = 10mA, Irr = 0.1 x IR, RL = 100W Reverse Recovery Time 7. Short duration test pulse used to minimize self-heating effect. 1 0.1 IR, INSTANTANEOUS REVERSE CURRENT (nA) IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: TA = 150ºC TA = 75ºC TA = 25ºC TA = 0ºC TA = -40ºC 0.01 0.001 1.0 0.5 0 10000 TA = 150ºC TA = 125ºC 1000 100 TA = 75ºC TA = 25ºC 10 TA = 0ºC 1 TA = -40ºC 0.1 20 0 1.5 60 40 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Characteristics 300 2.0 f = 1.0MHz 1.8 1.6 Pd, POWER DISSIPATION (mW) CT, TOTAL CAPACITANCE (pF) NEW PRODUCT Electrical Characteristics 1.4 1.2 1.0 0.8 0.6 0.4 0.2 250 200 150 100 50 0.0 0 10 20 30 40 0 0 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Junction Capacitance Per Element vs. Reverse Voltage DS30559 Rev. 3 - 2 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (° C) Fig. 4 Power Derating Curve 2 of 4 www.diodes.com SDA006 Notes: (Note 8) Device Packaging Shipping SDA006-7 SOT-363 3000/Tape & Reel 8. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information JAC = Product Type Marking Code YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September YM NEW PRODUCT Ordering Information JAC Date Code Key Year 2004 2005 2006 2007 2008 2009 Code R S T U V W Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D Typical Applications Three Phase, Full-Wave Bridge Rectifier AC1 3-Phase AC source DC- AC2 AC3 DC+ + Load - Data Line Bus Transient Suppressor VBUS/VCC DL1 DL3 DL2 Ground DS30559 Rev. 3 - 2 3 of 4 www.diodes.com SDA006 NEW PRODUCT IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30559 Rev. 3 - 2 4 of 4 www.diodes.com SDA006