SMT Power Inductor HMU1345, 1350, 1356, 1358, 1360M & 1362M Type Features RoHS compliant. Low profile, SMD type. High current. Magnetic shielded. High energy storage and low DCR. Provided with embossed carrier tape packing. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor applications. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension : RECOMMENDED PAD PATTERNS H C B D H 8.4 3.8 10.0 3.0 F A UNIT : mm/inch A = 12.60 0.4 / 0.496 0.016 B = 12.70 0.3 / 0.500 0.012 D = 8.95 / 0.352 E = 2.50 / 0.098 F = 9.50 / 0.374 G = 4.30 / 0.169 H = 1.90 / 0.075 E G ¡Ó 13.5 Electrical Characteristics : 25OC , 100KHz, 1V L 1 (uH) 1. 2. 3. 4. Li (uH) MIN. (m DCR ) MAX I sat 2 (Adc) I rms 3 (Adc) HEIGHT "C" (mm/inch) MAX. HMU1345-3R2 3.2 2.56 9.0 9.2 9.5 4.5 / 0.177 HMU1345-5R6 5.6 4.50 14.5 5.8 8.0 4.5 / 0.177 HMU1350-1R4 1.4 1.12 3.7 16.0 14.0 5.0 / 0.197 HMU1350-1R6 1.6 1.28 3.7 15.0 14.0 5.0 / 0.197 HMU1350-4R0 4.0 3.20 3.7 7.0 14.0. 5.0 / 0.197 HMU1356-0R4 0.4 0.32 1.1 40.0 26.0 5.6 / 0.220 HMU1356-0R6 0.6 0.48 1.1 40.0 26.0 5.6 / 0.220 HMU1356-0R6HS 0.6 0.48 1.9 34.5 20.0 5.6 / 0.220 HMU1356-0R8 0.8 0.64 1.9 31.0 20.0 5.6 / 0.220 HMU1356-1R0LD 1.0 0.80 1.9 25.0 20.0 5.6 / 0.220 HMU1356-1R4 1.4 1.12 3.8 15.5 14.5 5.6 / 0.220 HMU1356-4R4 4.4 3.52 8.0 12.5 10.0 5.6 / 0.220 HMU1356-4R7HS 4.7 3.76 11.4 10.5 8.2 5.6 / 0.220 HMU1358-4R7 4.7 3.76 7.5 9.0 10.0 5.8 / 0.228 HMU1360M-3R1 3.1 2.48 8.0 14.0 10.0 6.0 / 0.236 HMU1362M-5R2 5.2 4.16 9.2 11.0 9.5 6.2 / 0.244 Tolerance of inductance is 20%. Isat is the DC current which cause the inductance drop to Li. Irms is the DC current which cause the surface temperature of the part increase less than 45OC. Operating temperature : -20OC to 105OC ( including self-temperature rise ). DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 139