CL624 SERIES LumiSTIK - LED 6” BOLLARD TYPE: LumiStick QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION CL624 1 2 3 4 1- Heavy cast aluminum top cover with embedded heat sink. 2- Optical system assembly. 3- Ø 6” (152) high impact UV stabilized clear acrylic cylinder. Available in 24” (610) clear acrylic length. 4- Ø 1/2” (13) aluminum struts. 5- Ø 6” (152) extruded aluminum base. 5 MATERIALS MOUNTING LumiSTIK bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. COB LED is assembled on a thick pad housing chamber designed with a heat sink pattern to optimize heat dissipation and luminaire efficacy. The power supply is enclosed in an isolated chamber allowing quick access for electrical maintenance without disturbing the optical chamber. COB LED is removable and replaceable for ease of maintenance or lighting upgrade. Mounts with a set of 3 x 1/2”-13 x 18” lg galvanized anchor bolts. ELECTRICAL DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. LED Type III or V light distribution. Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. 24” (610) 42” (1066) LIFE 50,000hrs L85B50 (based on IESNA TM-21 Test Method and LM-80 data). FINISH CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. 4.7” (119) dia. Bolt circle April 2017 Rev 0 Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. 6” (152) dia. Base LUMINIS.COM 1 CL624 SERIES LumiSTIK - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information Descriptive Information CL624-L1W30-R3 Total Lms: 2580 Lumens Total Input Watts: 30 W Source: LED Efficacy: 86 Lumens/Watt BUG: B1-U0-G1 CCT/CRI: 4000K/80 Maximum Candela: 1470 @ 75 deg H/ 65 deg. V CL624-L1W30-R5 Total Lms: 2580 Lumens Total Input Watts: 30 W Source: LED Efficacy: 86 Lumens/Watt BUG: B2-U0-G2 CCT/CRI: 4000K/80 Maximum Candela: 1154 @ 65 deg. V Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION LED LIGHT SELECTION (4000K/80CRI) MODEL SUFFIX VOLTAGE INPUT WATTS DELIVERED LUMENS Type III L1W18-R3 L1W30-R3 18W 30W 1602 2580 Type V L1W18-R5 L1W30-R5 18W 30W 1602 2580 120V 277V Optional 347V 1 FINISH STANDARD COLORS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne SGT Steel Gray BGT English Cream OPTIONAL COLORS Wood grain finishes CL624 NMR Mahogany red2 NMO Maple oak2 NTW Teak wood2 Base column only CS Custom color RAL RAL# color (Refer to color chart) OPTIONS ELECTRICAL LIGHT REML2-50 Remote mount battery backup for LED 90 mins, 7W Remote mount to 50ft. 12” square enclosure with acces cover FS Fuse PH Photocell 347L 347V input power driver SP Surge protector 10KV Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 K3 K35 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. April 2017 Rev 0 NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Cast aluminum top & base covers are as follows for selected wood grain finishes: BZT paired with NMR; SGT paired with NMO; BGT paired with NTW (Other colors available. Please contact factory). LUMINIS.COM 2