54LS138/DM54LS138/DM74LS138, 54LS139/DM54LS139/DM74LS139 Decoders/Demultiplexers General Description These Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these decoders can be used to minimize the effects of system decoding. When used with high-speed memories, the delay times of these decoders are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. The LS138 decodes one-of-eight lines, based upon the conditions at the three binary select inputs and the three enable inputs. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented with no external inverters, and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. The LS139 comprises two separate two-line-to-four-line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. All of these decoders/demultiplexers feature fully buffered inputs, presenting only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and simplify system design. Features Y Y Y Y Y Y Y Designed specifically for high speed: Memory decoders Data transmission systems LS138 3-to-8-line decoders incorporates 3 enable inputs to simplify cascading and/or data reception LS139 contains two fully independent 2-to-4-line decoders/demultiplexers Schottky clamped for high performance Typical propagation delay (3 levels of logic) LS138 21 ns LS139 21 ns Typical power dissipation LS138 32 mW LS139 34 mW Alternate Military/Aerospace devices (54LS138, 54LS139) are available. Contact a National Semiconductor Sales Office/Distributor for specifications. Connection Diagrams Dual-in-Line Package Dual-in-Line Package TL/F/6391 – 1 Order Number 54LS138DMQB, 54LS138FMQB, 54LS138LMQB, DM54LS138J, DM54LS138W, DM74LS138M or DM74LS138N See NS Package Number E20A, J16A, M16A, N16E or W16A C1995 National Semiconductor Corporation TL/F/6391 TL/F/6391 – 2 Order Number 54LS139DMQB, 54LS139FMQB, 54LS139LMQB, DM54LS139J, DM54LS139W, DM74LS139M or DM74LS139N See NS Package Number E20A, J16A, M16A, N16E or W16A RRD-B30M105/Printed in U. S. A. 54LS138/DM54LS138/DM74LS138, 54LS139/DM54LS139/DM74LS139 Decoders/Demultiplexers June 1989 Absolute Maximum Ratings (Note) Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 7V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54LS and 54LS DM74LS 0§ C to a 70§ C Storage Temperature Range b 65§ C to a 150§ C Recommended Operating Conditions Symbol DM54LS138 Parameter VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage IOH High Level Output Current IOL Low Level Output Current TA Free Air Operating Temperature DM74LS138 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 2 2 V 0.7 0.8 V b 0.4 b 0.4 mA 4 b 55 V 125 0 8 mA 70 §C Max Units b 1.5 V ’LS138 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 1) VI Input Clamp Voltage VCC e Min, II e b18 mA VOH High Level Output Voltage VCC e Min, IOH e Max, VIL e Max, VIH e Min DM54 2.5 3.4 DM74 2.7 3.4 Low Level Output Voltage VCC e Min, IOL e Max, VIL e Max, VIH e Min DM54 0.25 0.4 DM74 0.35 0.5 IOL e 4 mA, VCC e Min DM74 0.25 0.4 VOL V V II Input Current @ Max Input Voltage VCC e Max, VI e 7V IIH High Level Input Current VCC e Max, VI e 2.7V 20 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b 0.36 mA IOS Short Circuit Output Current VCC e Max (Note 2) Supply Current VCC e Max (Note 3) ICC 0.1 DM54 b 20 b 100 DM74 b 20 b 100 Note 1: All typicals are at VCC e 5V, TA e 25§ C. Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 3: ICC is measured with all outputs enabled and open. 2 6.3 10 mA mA mA ’LS138 Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter From (Input) To (Output) RL e 2 kX Levels of Delay CL e 15 pF Min Max CL e 50 pF Min Units Max tPLH Propagation Delay Time Low to High Level Output Select to Output 2 18 27 ns tPHL Propagation Delay Time High to Low Level Output Select to Output 2 27 40 ns tPLH Propagation Delay Time Low to High Level Output Select to Output 3 18 27 ns tPHL Propagation Delay Time High to Low Level Output Select to Output 3 27 40 ns tPLH Propagation Delay Time Low to High Level Output Enable to Output 2 18 27 ns tPHL Propagation Delay Time High to Low Level Output Enable to Output 2 24 40 ns tPLH Propagation Delay Time Low to High Level Output Enable to Output 3 18 27 ns tPHL Propagation Delay Time High to Low Level Output Enable to Output 3 28 40 ns Recommended Operating Conditions Symbol DM54LS139 Parameter VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage IOH High Level Output Current IOL Low Level Output Current TA Free Air Operating Temperature DM74LS139 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 V 0.7 0.8 V b 0.4 b 0.4 mA 8 mA 70 §C 2 2 4 b 55 125 3 0 V ’LS139 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 1) Max Units b 1.5 V VI Input Clamp Voltage VCC e Min, II e b18 mA VOH High Level Output Voltage VCC e Min, IOH e Max, VIL e Max, VIH e Min DM54 2.5 3.4 DM74 2.7 3.4 Low Level Output Voltage VCC e Min, IOL e Max VIL e Max, VIH e Min DM54 0.25 0.4 DM74 0.35 0.5 IOL e 4 mA, VCC e Min DM74 0.25 0.4 VOL V V II Input Current @ Max Input Voltage VCC e Max, VI e 7V IIH High Level Input Current VCC e Max, VI e 2.7V 20 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b 0.36 mA IOS Short Circuit Output Current VCC e Max (Note 2) Supply Current VCC e Max (Note 3) ICC 0.1 DM54 b 20 b 100 DM74 b 20 b 100 6.8 11 mA mA mA Note 1: All typicals are at VCC e 5V, TA e 25§ C. Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 3: ICC is measured with all outputs enabled and open. ’LS139 Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) Symbol From (Input) To (Output) Parameter RL e 2 kX CL e 15 pF Min CL e 50 pF Max Min Units Max tPLH Propagation Delay Time Low to High Level Output Select to Output 18 27 ns tPHL Propagation Delay Time High to Low Level Output Select to Output 27 40 ns tPLH Propagation Delay Time Low to High Level Output Enable to Output 18 27 ns tPHL Propagation Delay Time High to Low Level Output Enable to Output 24 40 ns Function Tables LS138 Inputs Enable LS139 Inputs Outputs Select Enable Outputs Select G1 G2* C B A YO Y1 Y2 Y3 Y4 Y5 Y6 Y7 G B A Y0 Y1 Y2 Y3 X L H H H H H H H H H L L L L X L L H H X L H L H H L H H H H H L H H H H H L H H H H H L H X L L L L L L L L X X L L L L H H H H X X L L H H L L H H X X L H L H L H L H H H L H H H H H H H H H H L H H H H H H H H H H L H H H H H H H H H H L H H H H H H H H H H L H H H H H H H H H H L H H H H H H H H H H L H H H H H H H H H H L H e High Level, L e Low Level, X e Don’t Care * G2 e G2A a G2B H e High Level, L e Low Level, X e Don’t Care 4 Logic Diagrams LS138 TL/F/6391 – 3 LS139 TL/F/6391 – 4 5 Physical Dimensions inches (millimeters) Ceramic Leadless Chip Carrier Package (E) Order Number 54LS138LMQB or 54LS139LMQB NS Package Number E20A 16-Lead Ceramic Dual-In-Line Package (J) Order Number 54LS138DMQB, 54LS139DMQB, DM54LS138J or DM54LS139J NS Package Number J16A 6 Physical Dimensions inches (millimeters) (Continued) 16-Lead Small Outline Molded Package (M) Order Number DM74LS138M or DM74LS139M NS Packge Number M16A 16-Lead Molded Dual-In-Line Package (N) Order Number DM74LS138N or DM74LS139N NS Package Number N16E 7 54LS138/DM54LS138/DM74LS138, 54LS139/DM54LS139/DM74LS139 Decoders/Demultiplexers Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Flat Package (W) Order Number 54LS138FMQB, 54LS139FMQB, DM54LS138W or DM54LS139W NS Package Number W16A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.