Purdy AND157HSP Ultra bright led lamp Datasheet

AND157HSP
Ultra Bright LED Lamps
Weight: 0.31
g
Unit: mm
6.0± 0.2
AND157HSP
InGaAlP High Brightness Soft Red Light
Emission
5mm (T1-3/4) Package
5.0±0.2
1.0 MIN.
0.5
• Peak wavelength (λp=632 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 ~ 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity – suitable for outdoor usage
• High reliability, storage temp. –40 ~ 85°C
24.0 MIN.
1.0±0.2
8.6±0.3
Features
Maximum Ratings (Ta = 25°C)
2.54
0.5
Cathode Index
1
2
1. Anode
2. Cathode
Characteristics
Symbol
Rating
Unit
Forward Current
IF
50
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
125
mW
Operating Temperature Range
TOpr
-40 to 85
°C
Storage Temperature Range
TStg
-40 to 100
°C
Peak Forward Current Duty 1/
10, Pulse Width 10 ms
IFP
160
mA
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
2.0
2.6
V
Reverse Current
IR
VR = 5 V
–
–
50
µA
Luminous Intensity
IV
IF = 20 mA
4,500
5,650
–
mcd
Peak Emission Wavelength
lP
IF = 20 mA
–
632
–
nm
Spectral Line Half Width
λ∆
IF = 20 mA
–
20
–
nm
Dominant Wavelength
λd
IF = 20 mA
–
615
–
nm
2 θ 1/2
IV = 1/2 Peak
–
30
–
degree
Full Viewing Angle
Precaution
Please be careful of the following:
1. Soldering temperature: 260 C max., Soldering time: 5 sec. max.
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
1/30/07
AND157HSP
InGaAlP High Brightness Soft Red Light Emission
Ultra Bright LED Lamps
IV – IF
IF – VF
20000
Ta = 25ºC
Ta = 25ºC
30
Luminous Intensity IV (mcd)
Forward Current IF (mA)
50
10
5
3
10000
5000
3000
1000
500
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
200
2.3
1
Forward Voltage VF (V)
5
10
30
50
100
Forward Current IF (mA)
IV – TC
Relative Luminous Intensity – Wavelength
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
3
1
0.5
0.3
0.1
-20
0
20
40
60
IF = 20 mA
Ta = 25ºC
0.8
0.6
0.4
0.2
0
580
80
600
620
640
660
680
700
Wavelength λ (nm)
Case Temperature TC (ºC)
Radiation Pattern
IF – Ta
20º
10º
0º
10º
Ta = 25ºC
20º
30º
30º
40º
40º
50º
50º
60º
60º
70º
70º
80º
80º
Allowable Forward Current IF (mA)
80
60
40
20
90º
90º
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (ºC)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
100
1/30/07
Similar pages