MIL-C-24308 D-Subminiature M85049/48-1 Rectangular Strain-Relief Backshells for Unjacketed Wire Bundles M85049/48-1-3 F A Basic Part No. C Dash No. E Cable Entry in Shell Finish F = Yellow Chromate over Cadmium F Cable Entry in Shell H G TABLE I: CONNECTOR INTERFACE, CABLE ENTRY & BACKSHELL DIMENSIONS A Dash No. 1 2 3 4 5 ± .015 1.203 1.531 2.078 2.718 2.625 C (0.4) (30.6) (38.9) (52.8) (69.0) (66.7) ± .005 .984 1.312 1.852 2.500 2.406 E (.1) (25.0) (33.3) (47.0) (63.5) (61.1) ± .015 .375 .713 1.000 1.375 1.406 F (0.4) ± .015 (0.4) .375 (9.5) (9.5) .312 (7.9) (18.1) (25.4) .312 (7.9) (34.9) .312 (7.9) (35.7) .406 (10.3) G ± .015 .750 .750 1.000 1.000 1.125 (0.4) (19.1) (19.1) (25.4) (25.4) (28.6) H Max 1.250 (31.8) 1.250 (31.8) 1.563 (39.7) 1.563 (39.7) 1.688 (42.9) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Steel. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-112