Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] ACTF4201/415/DCC8 Features Low-loss RF filter High Rejection Single Ended Operation at 50Ω without matching Ceramic Package for Surface Mounted Technology (SMT) Lead-free Production and RoHS Compliance Package Dimensions Ceramic Package: DCC6 Pin Configuration 2 Input 5 Output 1, 3, 4, 6 Case Ground 1, 3, 4, 6 To Be Grounded Marking Laser marking Maximum Ratings Rating Value Unit Operating Temperature Range TA -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +85 °C DC Voltage (between any Terminals) VDC 0 V P 15 dBm RF Power (in BW) -1- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Electrical Characteristics Item Minimum fC Center Frequency Typical Maximum 415 Unit MHz IL Insertion Loss 400.00 …. 430.00 MHz Group Delay Ripple -- 400.00 …. 430.00 MHz 2.2 3.0 dB 20 40 ns α Absolute Attenuation 10.0 …. 345.00 MHz 25 29 dB 345.00 …. 390.00 MHz 9 13 dB 440.00 …. 470.00 MHz 4 7.5 dB 470.00 ….480.00 MHz 25 30 dB 480.00 ….561.00 MHz 27 34 dB 561.00 ….593.00 MHz 28 31 dB 593.00 ….950.00 MHz 21 23 dB 950.00 ….2000.00 MHz 13 16 dB 2000.00 …2500.00 MHz 5 8 dB Amplitude Ripple (p-p) 400.00 …. 430.00 MHz ∆α 0.8 1.5 Intput VSWR 400.00 …. 430.00 MHz 1.7：1 2.1：1 Output VSWR 400.00 …. 430.00 MHz 1.7：1 2.0：1 Input / Output Impedance (Nominal) 50 RoHS Compliant Typical Frequency Response Electrostatic Sensitive Device -2- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com dB Ω Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] -3- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Stability Characteristics Test item Condition of test 1 Mechanical shock (a) Drops: 3 times on concrete floor (b) Height: 1.0 m 2 Vibration resistance (a) Frequency of vibration: 10~55Hz (c) Directions: X,Y and Z (b) Amplitude: 1.5 mm (d) Duration: 2 hours 3 Moisture resistance (a) Condition: 40°C, 90~95% R.H. (c) Wait 4 hours before measurement (b) Duration: 96 hours 4 Climatic sequence (a) +70°C for 16 hours (b) +55°C for 24 hours, 90~95% R.H. (c) -25°C for 2 hours (d) +40°C for 24 hours, 90~95% R.H. (e) Wait 4 hours before measurement 5 High temperature exposure (a) Temperature: 70°C (c) Wait 4 hours before measurement 6 Thermal impact (a) +70°C for 30 minutes ⇒ -25°C for 30 minutes repeated 3 times (b) Wait 4 hours before measurement (b) Duration: 250 hours Requirements: The SAW filer shall remain within the electrical specifications after tests. Remarks SAW devices should not be used in any type of fluid such as water, oil, organic solvent, etc. Be certain not to apply voltage exceeding the rated voltage of components. Do not operate outside the recommended operating temperature range of components. Sudden change of temperature shall be avoided, deterioration of the characteristics can occur. Be careful of soldering temperature and duration of components when soldering. Do not place soldering iron on the body of components. Be careful not to subject the terminals or leads of components to excessive force. SAW devices are electrostatic sensitive. Please avoid static voltage during operation and storage. Ultrasonic cleaning shall be avoided. Ultrasonic vibration may cause destruction of components. Test Circuit Recommended Land Pattern 50Ω / 50Ω Configuration -4- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Packing Information Carrier Tape Reel Dimensions Outer Packing Type Quantity Dimension Description Weight Carton Box Ⅰ 10000 000 190×190×95 0.85 Carton Box Ⅱ 20000 0000 190×190×190 anti-static static plastic bag & carton box 1 reel / bag 5 bags / box (10000 pcs) 10 bags / box (20000 0000 pcs) Unit: mm 1.70 Unit: kg -5- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without withou notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Recommended Soldering Profile 1. 2. 3. The specifications of this device are subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. -6- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com