EIC BR5000W Silicon bridge rectifier Datasheet

BR5000W - BR5010W
SILICON BRIDGE RECTIFIERS
BR50W
PRV : 50 - 1000 Volts
Io : 50 Amperes
0.732 (18.6)
0.692 (17.5)
FEATURES :
*
*
*
*
*
*
High current capability
High surge current capability
High reliability
Low reverse current
Low forward voltage drop
High case dielectric strength
1.130 (28.7)
1.120 (28.4)
0.470 (11.9)
0.430 (10.9)
0.21 (5.3)
0.20 (5.1)
* Pb / RoHS Free
MECHANICAL DATA :
0.042 (1.06)
0.038 (0.96)
* Case : Molded plastic with heatsink integrally
mounted in the bridge encapsulation
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Bolt down on heat-sink
with silicone thermal compound between
bridge and mounting surface for maximum
heat transfer efficiency
* Weight : 15.95 grams
1.2 (30.5)
MIN.
0.310 (7.87)
0.280(7.11)
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
BR
5000W
BR
5001W
BR
5002W
BR
5004W
BR
5006W
BR
5008W
BR
5010W
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward Current Tc=55°C
IF(AV)
50
A
IFSM
400
A
RATING
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method)
Current Squared Time at t < 8.3 ms.
It
2
664
AS
Maximum Forward Voltage per Diode at IF = 25 A
VF
1.1
V
IR
10
µA
IR(H)
200
µA
RθJC
1.0
°C/W
TJ
- 40 to + 150
°C
TSTG
- 40 to + 150
°C
Maximum DC Reverse Current
Ta = 25 °C
at Rated DC Blocking Voltage
Ta = 100 °C
Typical Thermal Resistance at Junction to Case ( Note 1 )
Operating Junction Temperature Range
Storage Temperature Range
2
Notes :
1 ) Thermal resistance from Junction to Case with units mounted on heat sink.
Page 1 of 2
Rev. 02 : March 24, 2005
RATING AND CHARACTERISTIC CURVES ( BR5000W - BR5010W )
FIG.1 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
50
40
30
20
10
0
600
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD OUTPUT
CURRENT AMPERES
60
0
25
50
75
100
125
150
500
T J = 50 °C
400
300
200
8.3 ms SINGLE HALF SINE WAVE
JEDEC METHOD
100
0
175
1
CASE TEMPERATURE, ( °C)
2
4
6
10
20
40
60
100
NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PER DIODE
PER DIODE
10
10
REVERSE CURRENT,
MICROAMPERES
FORWARD CURRENT, AMPERES
T J = 100 °C
10
Pulse W idth = 300 µs
1 % Duty Cycle
1.0
1.0
T J = 25 °C
0.1
T J = 25 °C
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
0.0
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
FORWARD VOLTAGE, VOLTS
Page 2 of 2
Rev. 02 : March 24, 2005
Similar pages