GSI GS8160V18AT-300 1m x 18, 512k x 32, 512k x 36 18mb sync burst sram Datasheet

Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
1M x 18, 512K x 32, 512K x 36
18Mb Sync Burst SRAMs
100-Pin TQFP
Commercial Temp
Industrial Temp
Features
• FT pin for user-configurable flow through or pipeline
operation
• Single Cycle Deselect (SCD) operation
• 1.8 V +10%/–10% core power supply
• 1.8 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipeline mode
• Byte Write (BW) and/or Global Write (GW) operation
• Internal self-timed write cycle
• Automatic power-down for portable applications
• JEDEC-standard 100-lead TQFP package
350 MHz–150 MHz
1.8 V VDD
1.8 V I/O
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin (Pin 14). Holding the FT mode pin
low places the RAM in Flow Through mode, causing output
data to bypass the Data Output Register. Holding FT high
places the RAM in Pipeline mode, activating the rising-edgetriggered Data Output Register.
Byte Write and Global Write
Functional Description
Applications
The GS8160V18/32/36AT is an 18,874,368-bit (16,777,216-bit
for x32 version) high performance synchronous SRAM with a
2-bit burst address counter. Although of a type originally
developed for Level 2 Cache applications supporting high
performance CPUs, the device now finds application in
synchronous SRAM applications, ranging from DSP main
store to networking chip set support.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the Byte Write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS8160V18/32/36AT operates on a 1.8 V power supply.
All input are 1.8 V compatible. Separate output power (VDDQ)
pins are used to decouple output noise from the internal circuits
and are 1.8 V compatible.
Parameter Synopsis
Pipeline
3-1-1-1
Flow
Through
2-1-1-1
Rev: 1.00a 6/2003
-350
-333
-300
-250
-200
-150
Unit
tKQ
tCycle
1.8
2.85
2.0
3.0
2.2
3.3
2.3
4.0
2.7
5.0
3.3
6.7
ns
ns
Curr (x18)
Curr (x32/x36)
tKQ
tCycle
395
455
370
430
335
390
280
330
230
270
185
210
mA
mA
4.5
4.5
4.7
4.7
5.0
5.0
5.5
5.5
6.5
6.5
7.5
7.5
ns
ns
Curr (x18)
Curr (x32/x36)
270
305
250
285
230
270
210
240
185
205
170
190
mA
mA
1/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
A
A
E1
E2
NC
NC
BB
BA
E3
VDD
VSS
CK
GW
BW
G
ADSC
ADSP
ADV
A
A
GS8160V18A 100-Pin TQFP Pinout
NC
NC
NC
VDDQ
A
NC
NC
VDDQ
VSS
NC
DQPA
DQA
DQA
VSS
VDDQ
DQA
DQA
VSS
NC
VDD
ZZ
DQA
DQA
VDDQ
VSS
DQA
DQA
NC
NC
VSS
VDDQ
NC
NC
NC
LBO
A
A
A
A
A1
A0
NC
NC
VSS
VDD
A
A
A
A
A
A
A
A
A
VSS
NC
NC
DQB
DQB
VSS
VDDQ
DQB
DQB
FT
VDD
NC
VSS
DQB
DQB6
VDD
VSS
DQB
DQB
DQPB
NC
VSS
VDDQ
NC
NC
NC
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
1
80
2
79
3
78
4
77
5
76
6
75
7
74
8
73
9
72
1M
x
18
10
71
11
Top View
70
12
69
13
68
14
67
15
66
16
65
17
64
18
63
19
62
20
61
21
60
22
59
23
58
24
57
25
56
26
55
27
54
28
53
29
52
30
51
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.00a 6/2003
2/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
A
A
E1
E2
BD
BC
BB
BA
E3
VDD
VSS
CK
GW
BW
G
ADSC
ADSP
ADV
A
A
GS8160V32A 100-Pin TQFP Pinout
NC
DQC
DQC
VDDQ
VSS
DQC
DQC
DQC
DQC
VSS
VDDQ
DQC
DQC
NC
DQB
DQB
VDDQ
VSS
DQB
DQB
DQB
DQB
VSS
VDDQ
DQB
DQB
VSS
NC
VDD
ZZ
DQA
DQA
VDDQ
VSS
DQA
DQA
DQA
DQA
VSS
VDDQ
DQA
DQA
NC
LBO
A
A
A
A
A1
A0
NC
NC
VSS
VDD
A
A
A
A
A
A
A
A
A
FT
VDD
NC
VSS
DQD
DQD
VDDQ
VSS
DQD3
DQD
DQD
DQD
VSS
VDDQ
DQD
DQD
NC
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
1
80
2
79
3
78
4
77
5
76
6
75
7
74
8
73
9
72
512K
x
32
10
71
11
Top View
70
12
69
13
68
14
67
15
66
16
65
17
64
18
63
19
62
20
61
21
60
22
59
23
58
24
57
25
56
26
55
27
54
28
53
29
52
30
51
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.00a 6/2003
3/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
A
A
E1
E2
BD
BC
BB
BA
E3
VDD
VSS
CK
GW
BW
G
ADSC
ADSP
ADV
A
A
GS8160V36A 100-Pin TQFP Pinout
DQPC
DQC
DQC
VDDQ
VSS
DQC
DQC
DQC
DQC
VSS
VDDQ
DQC
DQC
DQPB
DQB
DQB
VDDQ
VSS
DQB
DQB
DQB
DQB
VSS
VDDQ
DQB
DQB
VSS
NC
VDD
ZZ
DQA
DQA
VDDQ
VSS
DQA
DQA
DQA
DQA
VSS
VDDQ
DQA
DQA
DQPA
LBO
A
A
A
A
A1
A0
NC
NC
VSS
VDD
A
A
A
A
A
A
A
A
A
FT
VDD
NC
VSS
DQD
DQD
VDDQ
VSS
DQD
DQD
DQD
DQD
VSS
VDDQ
DQD
DQD
DQPD
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
1
80
2
79
3
78
4
77
5
76
6
75
7
74
8
73
9
72
512K
x
36
10
71
11
Top View
70
12
69
13
68
14
67
15
66
16
65
17
64
18
63
19
62
20
61
21
60
22
59
23
58
24
57
25
56
26
55
27
54
28
53
29
52
30
51
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.00a 6/2003
4/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
TQFP Pin Description
Symbol
Type
Description
A 0, A 1
I
Address field LSBs and Address Counter preset Inputs
A
I
Address Inputs
DQA
DQB
DQC
DQD
I/O
Data Input and Output pins
BW
I
Byte Write—Writes all enabled bytes; active low
BA, BB, BC, BD
I
Byte Write Enable for DQA, DQB Data I/Os; active low
CK
I
Clock Input Signal; active high
GW
I
Global Write Enable—Writes all bytes; active low
E 1, E 3
I
Chip Enable; active low
E2
I
Chip Enable; active high
G
I
Output Enable; active low
ADV
I
Burst address counter advance enable; active low
ADSP, ADSC
I
Address Strobe (Processor, Cache Controller); active low
ZZ
I
Sleep Mode control; active high
FT
I
Flow Through or Pipeline mode; active low
LBO
I
Linear Burst Order mode; active low
VDD
I
Core power supply
VSS
I
I/O and Core Ground
VDDQ
I
Output driver power supply
NC
—
No Connect
Rev: 1.00a 6/2003
5/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
GS8160V18/32/36A Block Diagram
A0–An
Register
D
Q
A0
A0
D0
A1
Q0
A1
D1
Q1
Counter
Load
A
LBO
ADV
Memory
Array
CK
ADSC
ADSP
Q
D
Register
GW
BW
BA
D
Q
Register
D
36
Q
BB
36
4
Register
D
Q
D
Q
D
Q
Register
Register
D
Q
Register
BC
BD
Register
D
Q
Register
E1
E2
E3
D
Q
Register
D
Q
FT
G
ZZ
1
Power Down
Control
DQx1–DQx9
Note: Only x36 version shown for simplicity.
Rev: 1.00a 6/2003
6/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Mode Pin Functions
Mode Name
Pin
Name
Burst Order Control
LBO
Output Register Control
FT
Power Down Control
ZZ
State
Function
L
Linear Burst
H
Interleaved Burst
L
Flow Through
H or NC
Pipeline
L or NC
Active
H
Standby, IDD = ISB
Note:
There pull-up device on the and FT pin and a pull-down device on the ZZ pin, so those input pins can be unconnected and the chip will operate
in the default states as specified in the above tables.
Burst Counter Sequences
Interleaved Burst Sequence
Linear Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
00
01
10
11
1st address
00
01
10
11
2nd address
01
10
11
00
2nd address
01
00
11
10
3rd address
10
11
00
01
3rd address
10
11
00
01
4th address
11
00
01
10
4th address
11
10
01
00
Note: The burst counter wraps to initial state on the 5th clock.
Note: The burst counter wraps to initial state on the 5th clock.
BPR 1999.05.18
Rev: 1.00a 6/2003
7/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Byte Write Truth Table
Function
GW
BW
BA
BB
BC
BD
Notes
Read
H
H
X
X
X
X
1
Read
H
L
H
H
H
H
1
Write byte a
H
L
L
H
H
H
2, 3
Write byte b
H
L
H
L
H
H
2, 3
Write byte c
H
L
H
H
L
H
2, 3, 4
Write byte d
H
L
H
H
H
L
2, 3, 4
Write all bytes
H
L
L
L
L
L
2, 3, 4
Write all bytes
L
X
X
X
X
X
Notes:
1. All byte outputs are active in read cycles regardless of the state of Byte Write Enable inputs.
2. Byte Write Enable inputs BA, BB, BC and/or BD may be used in any combination with BW to write single or multiple bytes.
3. All byte I/Os remain High-Z during all write operations regardless of the state of Byte Write Enable inputs.
4. Bytes “C” and “D” are only available on the x32 and x36 versions.
Rev: 1.00a 6/2003
8/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Synchronous Truth Table
Operation
Address
Used
State
Diagram
Key5
E1
E2
Deselect Cycle, Power Down
None
X
H
X
X
Deselect Cycle, Power Down
None
X
L
F
Deselect Cycle, Power Down
None
X
L
Read Cycle, Begin Burst
External
R
Read Cycle, Begin Burst
External
Write Cycle, Begin Burst
ADV
W3
DQ4
L
X
X
High-Z
L
X
X
X
High-Z
F
H
L
X
X
High-Z
L
T
L
X
X
X
Q
R
L
T
H
L
X
F
Q
External
W
L
T
H
L
X
T
D
Read Cycle, Continue Burst
Next
CR
X
X
H
H
L
F
Q
Read Cycle, Continue Burst
Next
CR
H
X
X
H
L
F
Q
Write Cycle, Continue Burst
Next
CW
X
X
H
H
L
T
D
Write Cycle, Continue Burst
Next
CW
H
X
X
H
L
T
D
Read Cycle, Suspend Burst
Current
X
X
H
H
H
F
Q
Read Cycle, Suspend Burst
Current
H
X
X
H
H
F
Q
Write Cycle, Suspend Burst
Current
X
X
H
H
H
T
D
Write Cycle, Suspend Burst
Current
H
X
X
H
H
T
D
ADSP ADSC
Notes:
1. X = Don’t Care, H = High, L = Low
2. E = T (True) if E2 = 1 and E3 = 0; E = F (False) if E2 = 0 or E3 = 1
3. W = T (True) and F (False) is defined in the Byte Write Truth Table preceding.
4. G is an asynchronous input. G can be driven high at any time to disable active output drivers. G low can only enable active drivers (shown
as “Q” in the Truth Table above).
5. All input combinations shown above are tested and supported. Input combinations shown in gray boxes need not be used to accomplish
basic synchronous or synchronous burst operations and may be avoided for simplicity.
6. Tying ADSP high and ADSC low allows simple non-burst synchronous operations. See BOLD items above.
7. Tying ADSP high and ADV low while using ADSC to load new addresses allows simple burst operations. See ITALIC items above.
Rev: 1.00a 6/2003
9/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Simplified State Diagram
X
Deselect
W
R
Simple Burst Synchronous Operation
Simple Synchronous Operation
W
X
R
R
First Write
CW
First Read
CR
CR
W
X
R
R
X
Burst Write
Burst Read
X
CR
CW
CR
Notes:
1. The diagram shows only supported (tested) synchronous state transitions. The diagram presumes G is tied low.
2. The upper portion of the diagram assumes active use of only the Enable (E1, E2, and E3) and Write (BA, BB, BC, BD, BW, and GW)
control inputs, and that ADSP is tied high and ADSC is tied low.
3. The upper and lower portions of the diagram together assume active use of only the Enable, Write, and ADSC control inputs, and
assumes ADSP is tied high and ADV is tied low.
Rev: 1.00a 6/2003
10/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Simplified State Diagram with G
X
Deselect
W
R
W
X
R
R
First Write
CR
CW
W
CW
W
X
First Read
X
CR
R
Burst Write
R
CR
CW
W
Burst Read
X
CW
CR
Notes:
1. The diagram shows supported (tested) synchronous state transitions plus supported transitions that depend upon the use of G.
2. Use of “Dummy Reads” (Read Cycles with G High) may be used to make the transition from Read cycles to Write cycles without passing
through a Deselect cycle. Dummy Read cycles increment the address counter just like normal read cycles.
3. Transitions shown in gray tone assume G has been pulsed high long enough to turn the RAM’s drivers off and for incoming data to meet
Data Input Set Up Time.
Rev: 1.00a 6/2003
11/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Absolute Maximum Ratings
(All voltages reference to VSS)
Symbol
Description
Value
Unit
VDD
Voltage on VDD Pins
–0.5 to 3.6
V
VDDQ
Voltage in VDDQ Pins
–0.5 to 3.6
V
VI/O
Voltage on I/O Pins
–0.5 to VDDQ +0.5 (≤ 3.6 V max.)
V
VIN
Voltage on Other Input Pins
–0.5 to VDD +0.5 (≤ 3.6 V max.)
V
IIN
Input Current on Any Pin
+/–20
mA
IOUT
Output Current on Any I/O Pin
+/–20
mA
PD
Package Power Dissipation
1.5
W
TSTG
Storage Temperature
–55 to 125
o
–55 to 125
o
TBIAS
Temperature Under Bias
C
C
Note:
Permanent damage to the device may occur if the Absolute Maximum Ratings are exceeded. Operation should be restricted to Recommended
Operating Conditions. Exposure to conditions exceeding the Absolute Maximum Ratings, for an extended period of time, may affect reliability of
this component.
Rev: 1.00a 6/2003
12/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Power Supply Voltage Ranges
Parameter
Symbol
Min.
Typ.
Max.
Unit
1.8 V Supply Voltage
VDD1
1.6
1.8
2.0
V
1.8 V VDDQ I/O Supply Voltage
VDDQ1
1.6
1.8
2.0
V
Notes
Notes:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
VDDQ Range Logic Levels
Parameter
Symbol
Min.
Typ.
Max.
Unit
Notes
VDD Input High Voltage
VIH
0.6*VDD
—
VDD + 0.3
V
1
VDD Input Low Voltage
VIL
–0.3
—
0.3*VDD
V
1
VDDQ I/O Input High Voltage
VIHQ
0.6*VDD
—
VDDQ + 0.3
V
1,3
VDDQ I/O Input Low Voltage
VILQ
–0.3
—
0.3*VDD
V
1,3
Notes:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
3. VIHQ (max) is voltage on VDDQ pins plus 0.3 V.
Recommended Operating Temperatures
Parameter
Symbol
Min.
Typ.
Max.
Unit
Notes
Ambient Temperature (Commercial Range Versions)
TA
0
25
70
°C
2
Ambient Temperature (Industrial Range Versions)
TA
–40
25
85
°C
2
Note:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
Rev: 1.00a 6/2003
13/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Undershoot Measurement and Timing
Overshoot Measurement and Timing
VIH
20% tKC
VDD + 2.0 V
VSS
50%
50%
VDD
VSS – 2.0 V
20% tKC
VIL
Capacitance
(TA = 25oC, f = 1 MHZ, VDD = 2.5 V)
Parameter
Symbol
Test conditions
Typ.
Max.
Unit
Input Capacitance
CIN
VIN = 0 V
4
5
pF
Input/Output Capacitance
CI/O
VOUT = 0 V
6
7
pF
Note: These parameters are sample tested.
AC Test Conditions
Parameter
Conditions
Input high level
VDD – 0.2 V
Input low level
0.2 V
Input slew rate
1 V/ns
Input reference level
VDD/2
Output reference level
VDDQ/2
Output load
Fig. 1
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3. Device is deselected as defined by the Truth Table.
Output Load 1
DQ
50Ω
30pF*
VDDQ/2
* Distributed Test Jig Capacitance
Rev: 1.00a 6/2003
14/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
DC Electrical Characteristics
Parameter
Symbol
Test Conditions
Min
Max
Input Leakage Current
(except mode pins)
IIL
VIN = 0 to VDD
–1 uA
1 uA
ZZ Input Current
IIN1
VDD ≥ VIN ≥ VIH
0 V ≤ VIN ≤ VIH
–1 uA
–1 uA
1 uA
100 uA
FTInput Current
IIN2
VDD ≥ VIN ≥ VIL
0 V ≤ VIN ≤ VIL
–100 uA
–1 uA
1 uA
1 uA
Output Leakage Current
IOL
Output Disable, VOUT = 0 to VDD
–1 uA
1 uA
Output High Voltage
VOH
IOH = –4 mA, VDDQ = 1.6 V
VDDQ – 0.4 V
—
Output Low Voltage
VOL
IOL = 4 mA, VDD = 1.6 V
—
0.4 V
Rev: 1.00a 6/2003
15/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Rev: 1.00a 6/2003
—
Device Deselected;
All other inputs
≥ VIH or ≤ VIL
Standby
Current
Flow
Through
IDD
70
90
IDD
40
ISB
Pipeline
Pipeline
250
20
IDD
IDDQ
Flow
Through
40
360
35
IDD
IDDQ
Pipeline
ISB
270
35
IDD
IDDQ
Flow
Through
Flow
Through
400
55
0
to
70°C
IDD
IDDQ
Symbol
Pipeline
Mode
75
95
50
50
260
20
370
35
280
35
410
55
–40
to
85°C
-350
70
90
40
40
235
15
340
30
255
30
380
50
75
95
50
50
245
15
350
30
265
30
390
50
–40
to
85°C
-333
0
to
70°C
Notes:
1. IDD and IDDQ apply to any combination of VDD3, VDD2, VDDQ3, and VDDQ2 operation.
2. All parameters listed are worst case scenario.
Deselect
Current
—
ZZ ≥ VDD – 0.2 V
Operating
Current
(x18)
Device Selected;
All other inputs
≥VIH or ≤ VIL
Output open
(x32/
x36)
Test Conditions
Parameter
Operating Currents
60
85
40
40
215
15
310
25
240
30
345
45
0
to
70°C
65
90
50
50
225
15
320
25
250
30
355
45
–40
to
85°C
-300
60
85
40
40
200
10
260
20
220
20
290
40
0
to
70°C
65
90
50
50
210
10
270
20
230
20
300
40
–40
to
85°C
-250
50
75
40
40
175
10
215
15
190
15
240
30
0
to
70°C
55
80
50
50
185
10
225
15
200
15
250
30
–40
to
85°C
-200
50
60
40
40
160
10
170
15
175
15
190
20
0
to
70°C
55
65
50
50
170
10
180
15
185
15
200
20
–40
to
85°C
-150
mA
mA
mA
mA
mA
mA
mA
mA
Unit
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
16/24
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
AC Electrical Characteristics
Pipeline
Flow
Through
Parameter
Symbol
Clock Cycle Time
tKC
-350
-333
-300
-250
-200
-150
Unit
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
2.85
—
3.0
—
3.3
—
4.0
—
5.0
—
6.7
—
ns
Clock to Output Valid
tKQ
—
1.8
—
2.0
—
2.2
—
2.3
—
2.7
—
3.3
ns
Clock to Output Invalid
tKQX
1.0
—
1.0
—
1.0
—
1.0
—
1.0
—
1.0
—
ns
Clock to Output in Low-Z
tLZ1
1.0
—
1.0
—
1.0
—
1.0
—
1.0
—
1.0
—
ns
Setup time
tS
1.0
—
1.0
—
1.0
—
1.2
—
1.4
—
1.5
—
ns
Hold time
tH
0.1
—
0.1
—
0.1
—
0.2
—
0.4
—
0.5
—
ns
Clock Cycle Time
tKC
4.5
—
4.7
—
5.0
—
5.5
—
6.5
—
7.5
—
ns
Clock to Output Valid
tKQ
—
4.5
—
4.7
—
5.0
—
5.5
—
6.5
—
7.5
ns
Clock to Output Invalid
tKQX
3.0
—
3.0
—
3.0
—
3.0
—
3.0
—
3.0
—
ns
Clock to Output in Low-Z
tLZ1
3.0
—
3.0
—
3.0
—
3.0
—
3.0
—
3.0
—
ns
Setup time
tS
1.3
—
1.4
—
1.4
—
1.5
—
1.5
—
1.5
—
ns
Hold time
tH
0.3
—
0.4
—
0.4
—
0.5
—
0.5
—
0.5
—
ns
Clock HIGH Time
tKH
1.0
—
1.0
—
1.3
—
1.3
—
1.3
—
1.5
—
ns
Clock LOW Time
tKL
1.2
—
1.2
—
1.5
—
1.5
—
1.5
—
1.7
—
ns
Clock to Output in
High-Z
tHZ1
1.0
1.8
1.0
2.0
1.0
2.2
1.0
2.3
1.0
2.7
1.0
3.0
ns
G to Output Valid
tOE
—
1.8
—
2.0
—
2.2
—
2.3
—
2.7
—
3.3
ns
1
G to output in Low-Z
tOLZ
0
—
0
—
0
—
0
—
0
—
0
—
ns
G to output in High-Z
tOHZ1
—
1.8
—
2.0
—
2.2
—
2.3
—
2.7
—
3.0
ns
ZZ setup time
tZZS2
5
—
5
—
5
—
5
—
5
—
5
—
ns
ZZ hold time
tZZH2
1
—
1
—
1
—
1
—
1
—
1
—
ns
ZZ recovery
tZZR
20
—
20
—
20
—
20
—
20
—
20
—
ns
Notes:
1. These parameters are sampled and are not 100% tested.
2. ZZ is an asynchronous signal. However, in order to be recognized on any given clock cycle, ZZ must meet the specified setup and hold times
as specified above.
Rev: 1.00a 6/2003
17/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Rev: 1.00a 6/2003
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
18/24
DQa–DQd
G
E3
E2
E1
Ba–Bd
BW
GW
A0–An
ADV
ADSC
ADSP
CK
Begin
Pipeline Mode Timing
tS
tS
tS
tS
tS
A
tS
tS
tH
tH
tH
tH
Cont
tS
tOE
Single Read
Read A
Write B
tS
B
tH
tH
Single Write
tKL
tKH
tKC
Deselect
C
Q(A)
tOHZ
D(B)
tS
tH
tLZ
tKQ
Q(C)
Q(C+1)
E1 masks ADSP
Burst Read
Q(C+2)
Read C+1 Read C+2 Read C+3 Cont
ADSC initiated read
Read C
E2 and E3 only sampled with ADSP and ADSC
tH
tH
Cont
Q(C+3)
tKQX
Deselected with E1
Deselect
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
© 2003, Giga Semiconductor, Inc.
Rev: 1.00a 6/2003
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
19/24
DQa–DQd
G
E3
E2
E1
Ba–Bd
BW
GW
A0–An
ADV
ADSC
ADSP
CK
Begin
tS
tS
tS
A
tS
tS
tOE
tH
tH
tH
tH
Read A
Flow Through Mode Timing
tS
tS
tH
tH
tKH
tKL
tH
tKC
Cont1
tS
tS
B
tS
tH
tH
C
Q(A)
tS
D(B)
tOHZ
tH
tKQ
tLZ
Q(C)
Q(C+1)
Q(C+2)
Q(C+3)
Read C+1 Read C+2 Read C+3 Read C
Fixed High
Read C
tHADSC initiated read
Write B
E2 and E3 only sampled with ADSC
Cont
Deselect
Q(C)
tHZ
tKQX
Deselected with E1
Cont2
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Sleep Mode
During normal operation, ZZ must be pulled low, either by the user or by its internal pull down resistor. When ZZ is pulled high,
the SRAM will enter a Power Sleep mode after 2 cycles. At this time, internal state of the SRAM is preserved. When ZZ returns to
low, the SRAM operates normally after ZZ recovery time.
Sleep mode is a low current, power-down mode in which the device is deselected and current is reduced to ISB2. The duration of
Sleep mode is dictated by the length of time the ZZ is in a High state. After entering Sleep mode, all inputs except ZZ become
disabled and all outputs go to High-Z The ZZ pin is an asynchronous, active high input that causes the device to enter Sleep mode.
When the ZZ pin is driven high, ISB2 is guaranteed after the time tZZI is met. Because ZZ is an asynchronous input, pending
operations or operations in progress may not be properly completed if ZZ is asserted. Therefore, Sleep mode must not be initiated
until valid pending operations are completed. Similarly, when exiting Sleep mode during tZZR, only a Deselect or Read commands
may be applied while the SRAM is recovering from Sleep mode.
tKH tKL
ADSP
ADSC
tZZS
ZZ
~
~ ~
~
tKC
~
~
tS tH
tZZH
~
~~
~
CK
~
~ ~
~ ~
~~
~ ~
~ ~
~
Sleep Mode Timing Diagram
tZZR
Snooze
Application Tips
Single and Dual Cycle Deselect
SCD devices (like this one) force the use of “dummy read cycles” (read cycles that are launched normally but that are ended with
the output drivers inactive) in a fully synchronous environment. Dummy read cycles waste performance but their use usually
assures there will be no bus contention in transitions from reads to writes or between banks of RAMs. DCD SRAMs do not waste
bandwidth on dummy cycles and are logically simpler to manage in a multiple bank application (wait states need not be inserted at
bank address boundary crossings) but greater care must be exercised to avoid excessive bus contention.
Rev: 1.00a 6/2003
20/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
TQFP Package Drawing
L
Min. Nom. Max
A1
Standoff
0.05
0.10
0.15
A2
Body Thickness
1.35
1.40
1.45
b
Lead Width
0.20
0.30
0.40
c
Lead Thickness
0.09
—
0.20
D
Terminal Dimension
21.9
22.0
22.1
D1
Package Body
19.9
20.0
20.1
E
Terminal Dimension
15.9
16.0
16.1
E1
Package Body
13.9
14.0
14.1
e
Lead Pitch
—
0.65
—
L
Foot Length
0.45
0.60
0.75
L1
Lead Length
—
1.00
—
Y
Coplanarity
θ
Lead Angle
L1
c
e
D
D1
Description
Pin 1
Symbol
θ
b
A1
A2
0.10
Y
0°
—
7°
E1
E
Notes:
1. All dimensions are in millimeters (mm).
2. Package width and length do not include mold protrusion.
Rev: 1.00a 6/2003
21/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Ordering Information for GSI Synchronous Burst RAMs
Org
Part Number1
Type
Package
Speed2
(MHz/ns)
TA3
1M x 18
GS8160V18AT-350
Pipeline/Flow Through
TQFP
350/4.5
C
1M x 18
GS8160V18AT-333
Pipeline/Flow Through
TQFP
333/4.7
C
1M x 18
GS8160V18AT-300
Pipeline/Flow Through
TQFP
300/5
C
1M x 18
GS8160V18AT-250
Pipeline/Flow Through
TQFP
250/5.5
C
1M x 18
GS8160V18AT-200
Pipeline/Flow Through
TQFP
200/6.5
C
1M x 18
GS8160V18AT-150
Pipeline/Flow Through
TQFP
150/7.5
C
512K x 32
GS8160V32AT-350
Pipeline/Flow Through
TQFP
350/4.5
C
512K x 32
GS8160V32AT-333
Pipeline/Flow Through
TQFP
333/4.7
C
512K x 32
GS8160V32AT-300
Pipeline/Flow Through
TQFP
300/5
C
512K x 32
GS8160V32AT-250
Pipeline/Flow Through
TQFP
250/5.5
C
512K x 32
GS8160V32AT-200
Pipeline/Flow Through
TQFP
200/6.5
C
512K x 32
GS8160V32AT-150
Pipeline/Flow Through
TQFP
150/7.5
C
512K x 36
GS8160V36AT-350
Pipeline/Flow Through
TQFP
350/4.5
C
512K x 36
GS8160V36AT-333
Pipeline/Flow Through
TQFP
333/4.7
C
512K x 36
GS8160V36AT-300
Pipeline/Flow Through
TQFP
300/5
C
512K x 36
GS8160V36AT-250
Pipeline/Flow Through
TQFP
250/5.5
C
512K x 36
GS8160V36AT-200
Pipeline/Flow Through
TQFP
200/6.5
C
512K x 36
GS8160V36AT-150
Pipeline/Flow Through
TQFP
150/7.5
C
1M x 18
GS8160V18AT-350I
Pipeline/Flow Through
TQFP
350/4.5
I
1M x 18
GS8160V18AT-333I
Pipeline/Flow Through
TQFP
333/4.7
I
1M x 18
GS8160V18AT-300I
Pipeline/Flow Through
TQFP
300/5
I
1M x 18
GS8160V18AT-250I
Pipeline/Flow Through
TQFP
250/5.5
I
1M x 18
GS8160V18AT-200I
Pipeline/Flow Through
TQFP
200/6.5
I
1M x 18
GS8160V18AT-150I
Pipeline/Flow Through
TQFP
150/7.5
I
512K x 32
GS8160V32AT-350I
Pipeline/Flow Through
TQFP
350/4.5
I
512K x 32
GS8160V32AT-333I
Pipeline/Flow Through
TQFP
333/4.7
I
512K x 32
GS8160V32AT-300I
Pipeline/Flow Through
TQFP
300/5
I
512K x 32
GS8160V32AT-250I
Pipeline/Flow Through
TQFP
250/5.5
I
512K x 32
GS8160V32AT-200I
Pipeline/Flow Through
TQFP
200/6.5
I
512K x 32
GS8160V32AT-150I
Pipeline/Flow Through
TQFP
150/7.5
I
Status
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS8160V18AT-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipeline mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which
are covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.00a 6/2003
22/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
Org
Part Number1
Type
Package
Speed2
(MHz/ns)
TA3
512K x 36
GS8160V36AT-350I
Pipeline/Flow Through
TQFP
350/4.5
I
512K x 36
GS8160V36AT-333I
Pipeline/Flow Through
TQFP
333/4.7
I
512K x 36
GS8160V36AT-300I
Pipeline/Flow Through
TQFP
300/5
I
512K x 36
GS8160V36AT-250I
Pipeline/Flow Through
TQFP
250/5.5
I
512K x 36
GS8160V36AT-200I
Pipeline/Flow Through
TQFP
200/6.5
I
512K x 36
GS8160V36AT-150I
Pipeline/Flow Through
TQFP
150/7.5
I
Status
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS8160V18AT-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipeline mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which
are covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.00a 6/2003
23/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Preliminary
GS8160V18/32/36AT-350/333/300/250/200/150
18Mb Sync SRAM Datasheet Revision History
DS/DateRev. Code: Old;
New
GS8160VxxA_r1
Rev: 1.00a 6/2003
Types of Changes
Format or Content
Page;Revisions;Reason
• Creation of new datasheet
24/24
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2003, Giga Semiconductor, Inc.
Similar pages