Honeywell MLH025BSD14E Heavy duty pressure sensors/transducers line guide Datasheet

Heavy Duty
Pressure Sensors/
Transducers Line Guide
Heavy Duty products. Built for the toughest applications.
Honeywell Sensing and Control (S&C) offers decades of
experience in the heavy duty pressure products industry.
That’s why, industry-wide, our heavy duty pressure sensors
and transducers are known for enhanced quality, reliability,
and service – which adds up to outstanding value for your
applications.
Heavy Duty Pressure Sensors are small, allowing them to be
used on their own in tight packages or as the building block for
a complete transducer. The 13 mm Series and the 19 mm Series
were developed for potential use in pressure applications that
involve measurement of hostile media in harsh environments
compatible with 316 stainless steel, a type of steel that
increases corrosion resistance, improves resistance to pitting
from chloride ion solutions, and provides increased strength at
high temperatures.
Heavy Duty Pressure Transducers are complete amplified
and compensated pressure measurement solutions. With a
choice of ports, connectors, outputs and pressure ranges,
the PX2 Series, MLH Series and SPT Series transducers can
be configured to meet the needs of the application. They are
engineered to be resistant to a wide variety of media for use in
most harsh environments.
FEATURES
HEAVY DUTY PRESSURE
SENSORS
13 mm Series.
hydraulic controls, tank pressure, pressure
transmitters, and process control systems.
Features: Rugged, isolated stainless steel
package • Accommodates media that will
not adversely affect 316L stainless steel
• Based on reliable semiconductor
technology • Calibrated and temperature
compensated • Voltage or current supply
options • Absolute and sealed gage
pressures • For potential applications from
500 psi to 5,000 psi
19 mm Series.
Benefits: Used in high pressure potential
applications involving measurement of
hostile media in harsh environments.
Piezoresistive semiconductor sensor chip
in oil-isolated housing with or without
an integral ceramic for temperature
compensation and calibration is designed
to provide reliable, stable, and accurate
performance. Weld-ring collar and special
back support ring for enhanced cycle
life capability as well as further package
integration in OEM applications. Potential
applications include industrial and
Features: Rugged, isolated stainless steel
package • Accommodates media that will
not adversely affect 316L stainless steel
• Small size • Based on reliable
semiconductor technology • Absolute and
gage pressures • Vacuum compatible,
isolated sensors • Calibrated and
temperature compensated (some listings)
• For potential applications up to 500 psi
Benefits: Variety of pressure connections
allow use in wide range of OEM
equipment. Uncompensated version
for use in potential applications using
specialized circuit designs. Rugged
for use in potential applications where
corrosive liquids or gases are monitored
and may also be exposed to a vacuum
such as industrial controls, process control
systems, industrial automation and flow
control, and pressure calibrators.
HEAVY DUTY PRESSURE
TRANSDUCERS
PX2 Series.
Features: Cost-effective • Designed for
configurability • Application expertise
• Global support • Wide selection of
options • Short lead time • Small Total
Error Band (TEB) • Fast response time
• Long life • Six Sigma design standards
• Environmentally tough • Wide operating
temperature range • Shock and vibration
resistant • Good EMC protection
Benefits: Precise pressure measurement
solution optimizes system performance
at a competitive cost. Over 15,000
standard configurations. Honeywell’s
knowledgeable application engineers are
available to answer customer’s specific
design questions during the development
of their product. Honeywell’s global
presence offers immediate product
and application support throughout
the development cycle, from design
to global manufacturing. Numerous
sensing.honeywell.com
continued 1on page 4
Heavy Duty Pressure Sensors/Transducers Line
Guide
When reliability is
demanded, Honeywell
delivers.
Heavy Duty Pressure Sensors
and Transducers are found
in applications where they
cannot be easily replaced
— where supreme durability
is a top priority. That’s why
you’ll find Honeywell S&C
heavy duty pressure products
performing expertly in many
potential applications, such
as compressors and hydraulic
controls, and in industries
as diverse as aerospace,
medical, transportation,
agriculture, refrigeration,
and industrial. Our full line of
products deliver enhanced
performance and reliability,
plus: absolute, gage and
sealed-gage measurement; a
wide array of pressure ranges,
port styles, termination types,
and outputs; package types
from miniature surface mount
sensors to high-end stainless
steel isolated (for stringent
process control); pressure
ranges from 3 psi to 8,000 psi;
and corrosion resistance.
2
sensing.honeywell.com
Heavy Duty
Pressure Sensors
13 mm Series
19 mm Series
Pressure connection
weld ring with back support,
1/8-27 NPT, 1/4-18 NPT, 7/16 UNF
weld ring with body O-ring, flush
mount, flush mount with flange, 1/4-18
NPT, 1/8-27 NPT, 7/16 UNF, 1/4 BSPP,
Euro O-ring, 1/4 VCR (female nut)
Measurement type
absolute, sealed gage
absolute, gage, vacuum gage
Construction
wetted parts 316L SS
wetted parts 316L SS
Pressure range
0 psi to 500 psi through 0 psi to 5000 psi
0 psi to 3 psi through 0 psi to 500 psi
Output
0 mV to 100 mV (nominal)
0 mV to 100 mV (nominal)
Linearity
±0.25 %BFSL max.
±0.25 %BFSL max.
Amplified
no
no
Compensated temperature
range
0 °C to 82 °C [32 °F to 180 °F]
0 °C to 82 °C [32 °F to 180 °F]
Termination
ribbon cable
ribbon cable
Heavy Duty
Pressure
Transducers
PX2 Series
Pressure connection
NPT 1/4-18, NPT 1/8-27, 9/16-18 UNF SAE J1926-3, 7/16-20 UNF SAE J1926-3, 1/4
45° Flare Female Schrader, M12 x 1.5 ISO 6149-3, G1/4 ISO 1179-3, G1/8 ISO 1179-3
Measurement type
absolute, sealed gage
Construction
port and housing: 304 stainless steel; connector: PBT 30% GF
Pressure range
1 bar to 46 bar | 100 kPa to 4.6 MPa | 15 psi to 667 psi
Output
ratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95 %Vs; 3.3 V, 10 %Vs to 90 %Vs;
3.3 V, 5 %Vs to 95 %Vs
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
Accuracy
±0.25 %FSS
Total Error Band
±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F]
Amplified
yes
Compensated temperature
range
-40 °C to 125 °C [-40 °F to 257 °F]
Termination
Delphi Metri-Pack 150, Micro M12 IEC 61076-2, DIN EN 175301-803C, Deutsch
DTM04-3P, Cable Harness (1, 2, 3, 5 meter)
Heavy Duty
Pressure
Transducers
MLH Series
Pressure connection
1/4-18 NPT, M12 x 1.5 (ISO 6149), M14 x 1.5 (ISO 6149), 3/8-24 UNF (SAE-3 O-ring boss), M18 x 1.5 (ISO 6149),
1/8 in-27 NPT, 1/2 in-20 UNF (SAE-5 O-ring boss), M10 x 1 (ISO 6149), 1/4 in SAE female Schrader (7/16-20 UNF-2B internal
thread), 7/16-20 UNF (SAE-4 O-ring boss), 1/2 in NPT; 9/16-18 UNF (SAE-6 O-ring boss), R 1/4-19 BSPT (ISO 7-1 tapered
thread), G 1/4-19 (DIN 3852-2), G 1/8 with O-ring groove, M16 x 1.5 (ISO 6149), G 1/4 with O-ring groove, G 1/8 (DIN 3852-2),
R 1/8-28 BSPT (ISO 7-1 tapered thread), M20 x 1.5 (ISO 6149), 1/2-20 (SAE J514)
Measurement type
gage, sealed gage
Construction
port: 304L stainless steel; diaphragm: Haynes 214 alloy
Pressure range
0 psi to 50 psi through 0 psi to 8000 psi
Output
ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
Accuracy
±0.25 %FSS (±0.5 %FSS on ranges below 100 psi)
Amplified
yes
Compensated temperature
range
ratiometric output: -40 °C to 125 °C [-40 °F to 257 °F]
regulated and current outputs: -40 °C to 125 °C [-40 °F to 257 °F]
(See product literature for operating and temperature compensated area graphics.)
Termination
Delphi Metri-Pack 150, Hirschmann (mates with G4W1F), M12 x 1 (Brad Harrison micro), DIN 43650-C, 8 mm-male, Amp
Superseal 1.5; cable (1 m), cable (3 m), flying leads (20 AWG – 6 in), Deutsch DTM04-3P (integral)
Heavy Duty
Pressure
Transducers
SPT Series
Pressure connection
1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF, 1/4-19 BSPP, 1/4 VCR gland
Measurement type
absolute, gage, sealed gage, vacuum gage pressures
Construction
wetted parts 316L SS
Pressure range
0 psi to 3 psi through 0 psi to 5000 psi
Output
4 mA to 20 mA, 0 mV to 100 mV, 1 Vdc to 5 Vdc
Linearity
±0.25 %BFSL max.
Amplified
yes, amplified and unamplified
Compensated temperature
range
-10 °C to 85 °C [14 °F to 185 °F]
Termination
bayonet connector, cable
sensing.honeywell.com
3
standard or custom connectors, ports,
pressure ranges and types, and output
options. Customers can count on quick
response to prototypes, dedicated teams
and manufacturing processes ensure
product samples are shipped quickly.
Small Total Error Band of ±2% over a
compensated temperature range of -40
°C to 125 °C [-40 °F to 257 °F] provides
excellent interchangeability due to
minimal part-to-part variation in accuracy,
eliminates customers’ need for individual
transducer testing and calibration, and
supports system accuracy and warranty
requirements. Fast response time
maximizes system performance. 10 million
cycles (minimum) to operating pressure
provides long life in the application.
AC and AD output transfer functions
offer a 3.3 V ratiometric output with a
<7 ms turn-on time to enable use when
energy efficiency is a key requirement.
Compatibility with a wide variety of harsh
media, including refrigerants, engine oil,
brake fluid, hydraulic fluid, tap water,
and compressed water, up to IP69K
ingress protection sealing, and 100
V/m radiated immunity allow for use in
tough environments. Wide compensated
operating temperature range allows
customers to design the same sensor
into a variety of applications. Shock and
vibration resistance increase flexibility
of use within the application. Good EMC
protection means that the transducer
will not be damaged by environmental
electromagnetic interference. Potential
applications include industrial HVAC/R
and air compressors, as well as a wide
variety of general system and factory
automation pump, valve and fluid pressure
applications.
MLH Series.
Features: All-metal wetted parts • No
internal elastomeric seals • Stable
and creep free • Input reverse voltage
protection • Less than 2 ms response
time • Easy customization • Rated IP65 or
better • Exceeds CE heavy industrial EMC
for use in areas of high RFI/EMI
• Amplified and temperature compensated
• Wide choice of connections and
terminations • Calibration for special
pressure ranges
Benefits: Combines ASIC technology
with media isolated, metal diaphragm.
All-metal wetted parts for use in a variety
of potential fluid applications. Amplified
outputs often eliminate cost of external
amplifiers. Wide selection of industrystandard connectors and process
ports for enhanced reliability and user
flexibility. Potential applications include
compressors, refrigeration and HVAC/R,
general industrial and hydraulics, multiple
transportation applications including
braking and alternate fuels, medical.
SPT Series.
Features: Based on reliable
semiconductor technology • Rugged,
316L stainless steel wetted parts
• Calibrated and temperature
compensated • Absolute, gage, sealed
gage, and vacuum gage pressures
• For use in potential medical applications
where compatibility is a problem.
Benefits: Variety of pressure
connections allows use in wide range
of OEM equipment. For use in potential
applications where corrosive liquids and
gases are monitored such as industrial
automation and flow control, pressure
instrumentation, hydraulic systems, and
process control.
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
honeywell.com
4
sensing.honeywell.com
008154-10-EN
February 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship.
Honeywell’s standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales office for specific warranty
details. If warranted goods are returned to
Honeywell during the period of coverage,
Honeywell will repair or replace, at its
option, without charge those items it finds
defective. The foregoing is buyer’s sole
remedy and is in lieu of all warranties,
expressed or implied, including those
of merchantability and fitness for a
particular purpose. In no event shall
Honeywell be liable for consequential,
special, or indirect damages.
While we provide application assistance
personally, through our literature and
the Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this printing.
However, we assume no responsibility for
its use.
For more information about Sensing and
Control products, visit sensing.honeywell.
com or call +1-815-235-6847
Email inquiries to [email protected]
Similar pages