Series AM4TW-RZ 4 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package High efficiency up to 83% Wide 4:1 input range Operating temperature -40 to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model AM4TW-2403S-RZ AM4TW-2405S-RZ AM4TW-2407S-RZ AM4TW-2409S-RZ AM4TW-2412S-RZ AM4TW-2415S-RZ AM4TW-2418S-RZ AM4TW-2424S-RZ AM4TW-4803S-RZ AM4TW-4805S-RZ AM4TW-4807S-RZ AM4TW-4809S-RZ AM4TW-4812S-RZ AM4TW-4815S-RZ AM4TW-4818S-RZ AM4TW-4824S-RZ Output Voltage (V) Input Voltage (V) 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 1200 800 550 440 330 265 220 165 1200 800 550 440 330 265 220 165 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 100 220 100 220 10 220 1000 470 470 330 1000 47 10 22 77 80 80 80 83 83 80 81 77 80 78 82 81 81 81 82 Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 ±470 ±100 ±47 ±47 ±47 ±10 ±100 ±22 ±680 ±330 ±47 ±47 ±100 ±100 ±33 ±10 76 78 80 80 82 80 80 80 75 79 80 81 82 81 80 80 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 Models Dual output Model AM4TW-2403D-RZ AM4TW-2405D-RZ AM4TW-2407D-RZ AM4TW-2409D-RZ AM4TW-2412D-RZ AM4TW-2415D-RZ AM4TW-2418D-RZ AM4TW-2424D-RZ AM4TW-4803D-RZ AM4TW-4805D-RZ AM4TW-4807D-RZ AM4TW-4809D-RZ AM4TW-4812D-RZ AM4TW-4815D-RZ AM4TW-4818D-RZ AM4TW-4824D-RZ Output Voltage (V) Input Voltage (V) 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time www.aimtec.com F 051e R12.C Nominal Typical 24 48 9-36 18-72 Maximum Units VDC (Pi) Network 500 Tel: +1 514 620 2722 1 of 3 350 ms ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-RZ 4 Watt | DC-DC Converter Input Specifications (continued) Parameters Absolute Maximum Rating Nominal Typical 24 Vin 48 Vin -0.7-40 -0.7-80 100 Peak Input Voltage time Maximum Units VDC ms Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical 3 sec Rated Units 1500 VDC MOhm pF > 1000 500 Output Specifications Parameters Voltage accuracy Voltage balance (Dual Output Model) Short Circuit protection Short circuit restart Over current protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Load voltage regulation (Dual) Load voltage regulation (Dual) ±3.3V output model Temperature coefficient Ripple & Noise Rising time Conditions Typical Balanced Load ±1 ±1 Maximum Units % % Continuous Auto Recovery 120% Iout ±0.5 ±0.5 ±0.5 % % % % ±1.5 ±0.5 % % ±1.5 %/oC mV p-p ms ±0.02 60 10 At 20MHz Bandwidth General Specifications Parameters Conditions Typical Maximum Units KHz Switching frequency 100% load 260 o C Operating temperature Full Load without Derating -40 to +85 o C Storage temperature -40 to +125 o C Max Case +100 temperature Cooling Free air convection Humidity 90 % Case material Nickel coated copper Weight 26 g Dimensions(L x W x H) Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm MTBF >1 050 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval Safety www.aimtec.com F 051e R12.C CE EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B IEC61000-4-5, Perf. Criteria B IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: also designed to meet IEC 60950-1:2001 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-RZ 4 Watt | DC-DC Converter Pin Out Specifications Pin 2 3 9 11 14 16 22 23 Single -V Input -V Input Omitted N.C. +V Output -V Output +V Input +V Input Dimensions Dual -V Input -V Input Common -V Output +V Output Common +V Input +V Input NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only