SAW Components SAW Duplexer Cellular / WCDMA Band V Series/type: Ordering code: B7923 B39881B7923P810 Date: Version: January 26, 2011 2.0 EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Application ■ Multimode SAW duplexer for mobile telephone 0.4 0.55 0.3 5 6 7 9 8 Component size 2.5 x 2.0 mm2 Component height 0.68 mm max. RoHS compatible Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitivity Level 3 ■ ■ ■ ■ 0.4 Features 3 2 1 bottom view 0.4 ■ 4 ■ ■ ■ ■ Cellular\WCDMA Band V, Band VI (830-840 MHz) and Band IXX (830-845 MHz) systems Low insertion attenuation Low amplitude ripple High Tx band isolation Single ended to balanced transformation in Antenna - Rx path Impedance transformation 50Ω to 100Ω in Antenna - Rx path 0.68 0.9 side view 2.0 2.5 Pin configuration ■ ■ ■ ■ 3 1, 8 6 2, 4, 5, 7, 9 top view 1 TX Input RX Output (balanced) Antenna To be grounded 3 8 4,5,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. 2 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 11 nH4) ZRX = 100 Ω + 2 nH (balanced) 4) ZTX = 50 Ω Characteristics TX - ANT min. Center frequency fC Maximum insertion attenuation 824.0 ... 849.0 typ. @ 25 ˚C 836.5 max. 1.7 2.4 dB 1.4 2.02) dB MHz αmax MHz @fCarrier 826.4 ... 846.6 Amplitude ripple 824.0 ... 849.0 MHz αWCDMA ∆α MHz 0.8 1.4 dB @fCarrier 826.4 ... 846.6 MHz αWCDMA1) 0.4 0.92) dB Error Vector Magnitude @fCarrier 826.4 ... 846.6 MHz EVM3) 2.5 3.22) % Input VSWR (TX port) 824.0 ... 849.0 MHz 2.0 2.3 Output VSWR (ANT port) 824.0 ... 849.0 MHz 1.8 2.2 1) 545454) 1) 2) 3) 4) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please refer to recommended matching circuit on page (9). Please read cautions and warnings and important notes at the end of this document. 3 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 11 nH1) ZRX = 100 Ω + 2 nH (balanced) 1) ZTX = 50 Ω Characteristics TX - ANT Absolute attenuation 10.0 ... 420.0 ... 494.0 ... 701.0 ... 728.0 ... 764.0 ... 860.0 ... 869.0 ... 1565.42 ... 1573.374 ... 1577.466 ... 1597.5515 ... 1638.0 ... 1844.9 ... 1884.5 ... 1930.0 ... 2110.0 ... 2400.0 ... 3286.0 ... 4110.0 ... 4934.0 ... 5725.0 ... 1) min. typ. @ 25 ˚C 30 40 30 35 40 30 3 44 35 40 35 40 20 30 30 35 33 30 20 20 10 7 48 45 42 43 44 40 22 56 49 49 49 48 45 42 41 40 38 34 30 26 25 14 max. α 420.0 494.0 701.0 728.0 764.0 804.0 869.0 894.0 1573.374 1577.466 1585.42 1605.886 1708.0 1879.9 1919.6 1990.0 2170.0 2557.0 3406.0 4255.0 5350.0 5953.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz a1) Please refer to recommended matching circuit on page (9). Please read cautions and warnings and important notes at the end of this document. 4 January 26, 2011 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 11 nH4) ZRX = 100 Ω + 2 nH (balanced)4) ZTX = 50 Ω Characteristics ANT - RX min. Center frequency fC Maximum insertion attenuation 869.0 ... 894.0 typ. @ 25 ˚C 881.5 max. 1.8 2.7 dB 1.8 2.42) dB MHz αmax MHz 894.0 MHz αWCDMA ∆α MHz 0.7 1.5 dB ... 891.6 MHz αWCDMA1) 0.5 1.02) dB Input VSWR (ANT port) 869.0 ... 894.0 MHz 1.7 2.2 Output VSWR (RX port) 869.0 ... 894.0 MHz 1.9 2.3 @fCarrier 871.4 ... 891.6 Amplitude ripple (p-p) 869.0 ... @fCarrier 871.4 Common mode rejection ratio 869.0 ... 894.0 1) 2) 3) 4) MHz CMRR 1) 233) 35 a4) dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. A combination of 10o phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR Please refer to recommended matching circuit on page (9). Please read cautions and warnings and important notes at the end of this document. 5 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 11 nH2) ZRX = 100 Ω + 2 nH (balanced) 2) ZTX = 50 Ω Characteristics ANT - RX min. IMD product level limits1) at fTX = 836.5 MHz fRX = 881.5 MHz Blocker 1 45.0 MHz Blocker 2 791.5 MHz Blocker 3 1718.0 MHz Blocker 4 2554.5 MHz Attenuation 10.0 447.0 824.0 849.0 909.0 1000.0 1850.0 1920.0 1) 2) typ. @ 25 ˚C max. -135 -112 -92 -120 -106 -109 -89 -109 dBm dBm dBm dBm α ... ... ... ... ... ... ... ... 447.0 824.0 849.0 854.0 1000.0 1850.0 1920.0 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz 45 30 55 10 13 28 40 35 85 68 63 48 25 66 67 632) Power levels: 21.5 dBm Tx signal, -15dBm blocker at antenna port. Please refer to recommended matching circuit on page (9). Please read cautions and warnings and important notes at the end of this document. 6 January 26, 2011 dB dB dB dB dB dB dB dB SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 11 nH3) ZRX = 100 Ω + 2 nH (balanced) 3) ZTX = 50 Ω Characteristics TX - RX min. typ. @ 25 ˚C max. 55 63 dB 552) 65 dB Isolation 824.0 ... 849.0 MHz @fCarrier 826.4 ... 846.6 869.0 ... 894.0 MHz αWCDMA MHz @fCarrier 871.4 ... 891.6 1574.0 ... 1577.0 1638.0 ... 1708.0 2462.0 ... 2557.0 Common Mode Isolation 824.0 ... 849.0 @fCarrier 826.4 ... 846.6 1) 2) 3) 1) 50 59 dB MHz αWCDMA1) MHz MHz MHz 50 40 20 20 60 67 66 61 dB dB dB dB MHz MHz αWCDMA1) 55 552) 65 65 a3) dB dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. Please refer to recommended matching circuit on page (9). Please read cautions and warnings and important notes at the end of this document. 7 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Maximum ratings Storage temperature range DC voltage ESD voltage Input power at Tstg VDC VESD PIN –40/+85 5 1001) 824.0 ... 849.0 MHz elsewhere 1) ˚C V V 28 10 machine model, 10 pulses source and load impedance 50 Ω continuous wave T = 50˚C, 5.000 h } dBm dBm Acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫–∞ Sds 21 ( f )H RRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from 826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ H RRC ( f ) Please read cautions and warnings and important notes at the end of this document. 8 2 df = 1 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Matching circuit to terminating impedances (Element values depend upon PCB layout) 50 Ω Ant Rx1 Ls 50 Ω 1 La 6 50 Ω 3 50 Ω Rx2 Tx 8 Ls La 11 nH Ls 2 nH Please read cautions and warnings and important notes at the end of this document. 2,4,5,7,9 9 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-ANT (Passband) Frequency Response TX-ANT (Wideband) Please read cautions and warnings and important notes at the end of this document. 10 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response RX-ANT (Passband) Frequency Response RX-ANT (Wideband) Please read cautions and warnings and important notes at the end of this document. 11 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-RX (Passband Differential Mode Isolation) Frequency Response TX-RX (Wideband Differential Mode Isolation) Please read cautions and warnings and important notes at the end of this document. 12 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-RX (Passband Common Mode Isolation) Frequency Response TX-RX (Wideband Common Mode Isolation) Please read cautions and warnings and important notes at the end of this document. 13 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Matching (TX, RX, ANT) Please read cautions and warnings and important notes at the end of this document. 14 January 26, 2011 SAW Components B7923 SAW Duplexer 836.50 / 881.50 MHz Data Sheet References Type B7923 Ordering code B39881B7923P810 Marking and package C61157-A3-A61 Packaging F71074-V8153-Z000 Date codes L_1126 S-parameters B7923_NB.s4p, B7923_WB.s4p; see file header for pin/port assignments; Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 15 January 26, 2011 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 16 January 26, 2011