Seme LAB IP123AG-05 3 amp positive voltage regulator Datasheet

IP123A
IP123A
IP323A
LM123
3 AMP
POSITIVE
VOLTAGE REGULATORS
1 2 3
1
SERIES
SERIES
SERIES
SERIES
2
3
Pin 1 – VIN
Pin 2 – VOUT
Case – Ground
Pin 1
Pin 2
Pin 3
Case
K Package – TO–3
–
–
–
–
VIN
Ground
VOUT
Ground
G Package – TO–257
FEATURES
• 0.04%/V LINE REGULATION
• 0.3%/A LOAD REGULATION
1
2
1
3
2
• THERMAL OVERLOAD PROTECTION
3
• SHORT CIRCUIT PROTECTION
• SAFE OPERATING AREA PROTECTION
Pin 1
Pin 2
Pin 3
Case
–
–
–
–
VIN
Ground
VOUT
Ground
Pin 1
Pin 2
Pin 3
Case
T Package – TO–220
–
–
–
–
VIN
Ground
VOUT
Ground
V Package – TO–218
1
• 1% TOLERANCE
• START–UP WITH NEGATIVE VOLTAGE
(± SUPPLIES) ON OUTPUT
• AVAILABLE IN 5V, 12V AND 15V OPTIONS
3
2
Pin 1 – VIN
Pin 2 – Ground
Pin 3 – VOUT
SG Package – TO–220SM
CERAMIC SURFACE MOUNT
ABSOLUTE MAXIMUM RATINGS
(TC = 25°C unless otherwise stated)
VI
DC Input Voltage
35V
PD
Power Dissipation
Internally limited
TJ
Operating Junction Temperature Range
TSTG
Storage Temperature Range
TL
Lead Temperature (Soldering, 10 sec)
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
See Ordering Information
–65°C to +150°C
300°C
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
ELECTRICAL CHARACTERISTICS
Parameter
VO
Output Voltage
SERIES
SERIES
SERIES
SERIES
(TJ = 25°C unless otherwise stated)
Test Conditions
IP123A–05
IP323A–05
Min. Typ. Max.
IO = 1A
VIN = 7.5V
4.95
POUT ≤ PMAX 2
VIN = 8V to 15V
5
4.85
IO = 5mA to 3A
IP123–05
LM123–05
Min. Typ. Max. Units
5.05
4.8
5.15
4.75
5
5.2
V
5.25
V
15
25
mV
50
100
mV
10
14
mA
1.5
3.0
mA
1.5
3.0
mA
TJ = Over Temp. Range 1
∆VO Line Regulation
∆VO Load Regulation
IQ
Quiescent Current
IO = 1A
TJ = Over Temp. Range 1
VIN = 8V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 8V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 8V
∆IQ
VIN = 7.5V to 15V
IO = 5mA to 3A
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = 1A
VIN = 7.5V to 15V
TJ = Over Temp. Range 1
VN
Output Noise
Voltage
∆VIN
∆VO
ISC
Ripple Rejection
Short Circuit Current
40
f = 10Hz to 100kHz
f = 120Hz
VIN = 8V to 18V
66
IO = 1A
TJ = Over Temp. Range 1
60
80
Junction to Case
60
80
VIN = 15V
3
3
VIN = 7.5V
4
4
35
1.5
2.5
2
G Package , T Package
3
4
4
TBA
A
35
K Package , V Package
SG Package
dB
56
Long Term Stability
RθJC Thermal Resistance
µVrms
40
mV
°C/W
TBA
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP123A / IP123 / LM123
TJ =
0 to +125°C for IP323A
All other specifications apply at TJ = 25°C unless otherwise stated.
2) PMAX = 30W for K–Pack (TO–3) , V–Pack (TO–218) and G–Pack (TO–257) Packages.
PMAX = 25W for T–Pack (TO–220) Package.
PMAX = 15W for SG–Pack (TO–220SM) Package.
3) All characteristics are measured with a capacitor across the input of 0.22µF and a capacitor across the output of 0.1µF.
4) All characteristics except noise voltage and ripple rejection ratios are measured using pulse techniques (tp ≤ 10ms , δ ≤ 5%).
5) Output voltage changes due to changes into internal temperature must be taken into account separately.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
ELECTRICAL CHARACTERISTICS
Parameter
VO
Output Voltage
SERIES
SERIES
SERIES
SERIES
(TJ = 25°C unless otherwise stated)
Test Conditions
IP123A–12
IP323A–12
Min. Typ. Max.
IO = 1A
VIN = 14.8V
11.88
POUT ≤ PMAX 2
VIN = 15.4V to 22V
12
11.64
IO = 5mA to 3A
IP123–12
LM123–12
Min. Typ. Max. Units
12.12
11.5
12.36
11.4
12
12.5
V
12.6
V
36
60
mV
75
150
mV
10
14
mA
1.5
3.0
mA
1.5
3.0
mA
TJ = Over Temp. Range 1
∆VO Line Regulation
∆VO Load Regulation
IQ
Quiescent Current
IO = 1A
TJ = Over Temp. Range 1
VIN = 15.4V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 15.4V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 15.4V
∆IQ
VIN = 14.8V to 22V
IO = 5mA to 3A
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = 1A
VIN = 14.8V to 22V
TJ = Over Temp. Range 1
VN
Output Noise
Voltage
∆VIN
∆VO
Ripple Rejection
75
f = 10Hz to 100kHz
f = 120Hz
VIN = 15.4V to 25.4V
58
IO = 1A
TJ = Over Temp. Range 1
52
µVrm
75
72
52
72
dB
48
ISC
Short Circuit Current VIN = 15.4V
3
3
A
Ipk
Peak Output Current VIN = 15.4V
4
4
A
84
Long Term Stability
RθJC Thermal Resistance
Junction to Case
84
K Package , V Package
1.5
2.5
2
G Package , T Package
3
4
4
TBA
SG Package
mV
°C/W
TBA
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP123A / IP123 / LM123
TJ =
0 to +125°C for IP323A
All other specifications apply at TJ = 25°C unless otherwise stated.
2) PMAX = 30W for K–Pack (TO–3) , V–Pack (TO–218) and G–Pack (TO–257) Packages.
PMAX = 25W for T–Pack (TO–220) Package.
PMAX = 15W for SG–Pack (TO–220SM) Package.
3) All characteristics are measured with a capacitor across the input of 0.22µF and a capacitor across the output of 0.1µF.
4) All characteristics except noise voltage and ripple rejection ratios are measured using pulse techniques (tp ≤ 10ms , δ ≤ 5%).
5) Output voltage changes due to changes into internal temperature must be taken into account separately.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
ELECTRICAL CHARACTERISTICS
Parameter
VO
Output Voltage
SERIES
SERIES
SERIES
SERIES
(TJ = 25°C unless otherwise stated)
Test Conditions
IP123A–15
IP323A–15
Min. Typ. Max.
IP123–15
LM123–15
Min. Typ. Max. Units
IO = 1A
VIN = 17.9V
14.85
15.15
14.4
POUT ≤ PMAX 2
VIN = 18.5V to 25V
15.45
14.25
15
14.55
IO = 5mA to 3A
15
15.6
V
15.75
V
45
75
mV
75
150
mV
10
14
mA
1.5
3.0
mA
1.5
3.0
mA
TJ = Over Temp. Range 1
∆VO Line Regulation
∆VO Load Regulation
IQ
Quiescent Current
IO = 1A
TJ = Over Temp. Range 1
VIN = 18.5V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 18.5V
IO = 5mA to 3A
TJ = Over Temp. Range 1
VIN = 18.5V
∆IQ
VIN = 17.9V to 25V
IO = 5mA to 3A
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = 1A
VIN = 17.9V to 25V
TJ = Over Temp. Range 1
VN
Output Noise
Voltage
∆VIN
∆VO
Ripple Rejection
f = 120Hz
VIN = 18.5V to 28.5V
56
IO = 1A
TJ = Over Temp. Range 1
50
µVrm
90
90
f = 10Hz to 100kHz
50
70
70
dB
46
ISC
Short Circuit Current VIN = 18.5V
2.5
2.5
A
Ipk
Peak Output Current VIN = 18.5V
4
4
A
RθJC Thermal Resistance
Junction to Case
105
105
Long Term Stability
K Package , V Package
1.5
2.5
2
G Package , T Package
3
4
4
TBA
SG Package
mV
°C/W
TBA
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP123A / IP123 / LM123
TJ =
0 to +125°C for IP323A
All other specifications apply at TJ = 25°C unless otherwise stated.
2) PMAX = 30W for K–Pack (TO–3) , V–Pack (TO–218) and G–Pack (TO–257) Packages.
PMAX = 25W for T–Pack (TO–220) Package.
PMAX = 15W for SG–Pack (TO–220SM) Package.
3) All characteristics are measured with a capacitor across the input of 0.22µF and a capacitor across the output of 0.1µF.
4) All characteristics except noise voltage and ripple rejection ratios are measured using pulse techniques (tp ≤ 10ms , δ ≤ 5%).
5) Output voltage changes due to changes into internal temperature must be taken into account separately.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
SERIES
SERIES
SERIES
SERIES
TYPICAL PERFORMANCE CHARACTERISTICS
MAXIMUM AVERAGE POWER DISSIPATION
( For IP123AK, IP123K, IP123AG, IP123G)
MAXIMUM AVERAGE POWER DISSIPATION
( For IP323AK, IP323K, IP323AV, IP323V)
40
θSA OF HEATSINKS
30
PD (A V ) Maximum Average Power
Dissipation (W )
PD(AV ) Maximum Average Power
Dissipation (W )
40
INFINITE
HEAT SINK
1.3 ˚C/W
2.4 ˚C/W
20
3.3 ˚ C/W
6.3 ˚C/W
10
10.5 ˚C/W
0
θSA OF HEATSINKS
30
2.4 ˚C/W
20
3.3 ˚C/W
10
6.3 ˚C/W
10.5 ˚C/W
0
25
50
75
100
125
25
TAM B Am bient Temperature (˚ C)
50
75
100
125
TAM B Am bient Temperature (˚C)
OUTPUT VOLTAGE
(Normalised to 1V at TJ = 25°C)
OUTPUT IMPEDANCE
1.02
10
V IN = 10V
1.01
Output Impedance (Ω)
Normalised Output Voltage (V)
INFINITE
HEAT SINK
1.3 ˚C/W
1.00
0.99
1
VOU T = 5V
CO U T = 0
I OU T = 1A
0.1
C OU T = 10 µF
0.01
0.001
0.98
-50
-25
0
25
50
75
100
125
150
0.0001
10
Tem perature (˚C)
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
100
1k
10k
100k
1M
Frequency (Hz)
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
SERIES
SERIES
SERIES
SERIES
TYPICAL PERFORMANCE CHARACTERISTICS
RIPPLE REJECTION
RIPPLE REJECTION
90
100
Ripple Rejection (dB)
Ripple Rejection (dB)
IOU T = 50mA
80
IOU T = 3A
60
VOU T = 5V
VIN = 13V DC + 3.5V rms
COU T = 0
40
80
70
F = 120Hz
VIN – VOU T = 8V DC + 3.5V rms
60
I OU T = 1A
T J = 25˚C
T J = 25˚C
20
1
10
100
1k
10k
100k
50
1M
0
5
10
Frequency (Hz)
CURRENT LIMIT
20
25
DROPOUT VOLTAGE
6
2.50
Input – Output Differential (V)
TJ = –55˚C
5
Output Current (A)
15
Output Voltage (V)
4
TJ = 150˚C
3
TJ = 25˚C
2
1
0
0
5
10
15
20
25
30
∆VOUT = 100mV
2.00
I OUT = 3A
I OUT = 1A
1.50
I OUT = 0.5A
1.00
0.50
-75 -50 -25
35
Input – Output Differential (V)
0
25
50
75
100 125 150
Junction Temperature (˚C)
QUIESCENT CURRENT
QUIESCENT CURRENT
5.50
6.50
VOUT = 5V
I OUT = 1A
Quiescent Current (mA)
Output Current (mA)
6.00
T J = 25˚C
5.50
5.00
4.50
5.00
4.50
4.00
4.00
V IN = 10V
VOU T = 5V
IOU T = 1A
3.50
5
10
15
20
25
30
35
3.50
-75
Input Voltage (V)
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
-50
-25
0
25
50
75
100 125 150
Junction Temperature (˚C)
Prelim. 8/95
IP123A
IP123A
IP323A
LM123
SERIES
SERIES
SERIES
SERIES
APPLICATIONS INFORMATION
FIXED OUTPUT REGULATOR
IN P U T
1
R EGU LATOR
2
ADJUSTABLE OUTPUT REGULATOR
OUTP UT
INP U T
1
R E GULA TOR
2
OUTP UT
R1
3 GN D
C 1*
0.22 µF
C1
0.22 µF
C 2**
3 GN D
R2
* Required if the regulator is located far from the power supply filter.
** Although no output capacitor is needed for stability, it does help
transient response. If needed, use a 0.1µF ceramic disk.
VOUT = VREG + (VREG / R1 + IQ) R2
VREG / R1 > 3 IQ
( R1 + R2 )
Load Regulation (Lr) ≈
R1
[
]
(LR of regulator)
CURRENT REGULATOR
IN PU T
1
RE GU LA TO R
2
R1
3
C1
0.22 µF
OU TPU T
I OU T
VREG
+ IQ
R1
∆IQ = 3.0mA over line and load changes.
IOUT =
Order Information
Part
K–Pack
Number
(TO–3)
IP123Axx–zz
✔
IP123xx–zz
✔
LM123xx–zz
✔
IP323Axx–zz
✔
G–Pack
T–Pack
V–Pack
(TO–257) (TO–220) (TO–218)
✔
✔
✔
SG–Pack
TO–220SM
✔
✔
✔
✔
Temp.
Range
-55 to +150°C
”
”
0 to +125°C
Note:
xx = Package Code
(K, G, T, V, SM)
eg.
IP123AK–15
Semelab plc.
zz = Voltage Code
(05, 12, 15)
IP123ASG–05
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 8/95
Similar pages