MCA-10 1 0 W U l t r a m i n i a t ure Modular Switching Power Supplies series Single / Dual / Triple Outputs Universal 85VAC to 265VAC Input 3.3VDC to 24VDC Outputs 3,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals PCB 2.56”L x 1.77”W x 0.83”H Chassis 3.77”L x 2.16”W x 1.0”H Model Number Output Voltage Output Amps Output Watts SINGLE OUTPUT - PCB Mount MSCA-0100 3.3 VDC MSCA-0101 5 VDC MSCA-0104 9 VDC MSCA-0102 12 VDC MSCA-0103 15 VDC MSCA-0105 24 VDC 2.5 2 1.1 0.85 0.67 0.42 8W 10W 10W 10W 10W 10W SINGLE OUTPUT - Chassis Mount MSCC-0100 3.3 VDC MSCC-0101 5 VDC MSCC-0104 9 VDC MSCC-0102 12 VDC MSCC-0103 15 VDC MSCC-0105 24 VDC 2.5 2 1.1 0.85 0.67 0.42 8W 10W 10W 10W 10W 10W SINGLE OUTPUT - DIN Rail Mount MSCC-0100/DRL 3.3 VDC MSCC-0101/DRL 5 VDC MSCC-0104/DRL 9 VDC MSCC-0102/DRL 12 VDC MSCC-0103/DRL 15 VDC MSCC-0105/DRL 24 VDC 2.5 2 1.1 0.85 0.67 0.42 8W 10W 10W 10W 10W 10W Order On-Line! WWW.ASTRODYNE.COM astrodyne.com Fully Approved UL/CSA22.2 60950-1 File# E167432 EN60950 File# B021022749033 IEC60950-1 File# DE354029 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 MCA-10 1 0 W U l t r a m i n i a t ure Modular Switching Power Supplies series Single / Dual / Triple Outputs Universal 85VAC to 265VAC Input 3.3VDC to 24VDC Outputs 3,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals PCB 2.56”L x 1.77”W x 0.83”H Chassis 3.77”L x 2.16”W x 1.0”H Model Number Output Voltage Output Amps Output Watts DUAL OUTPUT - PCB Mount MDCA-0106 +/-12 VDC MDCA-0107 +/-15 VDC MDCA-0108 +5/12 VDC +/-0.42 +/-0.34 1/0.42 10W 10W 10W DUAL OUTPUT - Chassis Mount MDCC-0106 +/-12 VDC MDCC-0107 +/-15 VDC MDCC-0108 +5/12 VDC +/-0.42 +/-0.34 1/0.42 10W 10W 10W DUAL OUTPUT - DIN Rail Mount MDCC-0106/DRL +/-12 VDC MDCC-0107/DRL +/-15 VDC MDCC-0108/DRL +5/12 VDC +/-0.42 +/-0.34 1/0.42 10W 10W 10W TRIPLE OUTPUT - PCB Mount MTCA-0109 +5,+/-12 VDC MTCA-0111 +5,+/-15 VDC 1.5,0.1/0.1 1.4,0.1/0.1 10W 10W TRIPLE OUTPUT - Chassis Mount MTCC-0109 +5,+/-12 VDC MTCC-0111 +5,+/-15 VDC 1.5,0.1/0.1 1.4,0.1/0.1 10W 10W TRIPLE OUTPUT - DIN Rail Mount MTCC-0109/DRL +5,+/-12 VDC MTCC-0111/DRL +5,+/-15 VDC 1.5,0.1/0.1 1.4,0.1/0.1 10W 10W Order On-Line! WWW.ASTRODYNE.COM astrodyne.com Fully Approved UL/CSA22.2 60950-1 File# E167432 EN60950 File# B021022749033 IEC60950-1 File# DE354029 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 MCA-10 1 0 W U l t r a m i n i a t ure Modular Switching Power Supplies INPUT SPECIFICATIONS Input Voltage, Nominal Input Frequency Inrush Current GENERAL SPECIFICATIONS 85-265VAC Nominal: 100-240VAC 47-440 Hz, 50-60Hz Nom. 20A @ 100VAC, typ 40A @ 200VAC, typ OUTPUT SPECIFICATIONS Output Voltage/Current Initial Accuracy Voltage Adjust Load Regulation Line Regulation Temperature Coefficient Ripple/Noise(20Mhz BW) Overvoltage Protection Hold Up Time Short Circuit Protection Current Limit series See Specific Model +/-1%, adjustable +/-6%, typ +/-0.3%, typ +/-0.3%, typ +/-0.03%/°C 150mV Pk-Pk, typ Clamp, 130-150% * 30mS, typ Continuous, self-recovering * 130% typ,Self-Reset Foldback On/Off Control Input-Out Isolation Output-Ground Isolation Input-Ground Isolation Operating Frequency Efficiency (@ Full Load) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Relative Humidity Storage Temperature MTBF, Single/Multi Output * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM 0 to +50°C FL See Derate * (Free-air Convection) 0-95%, Non-Condensing -25 to +71°C * 180,000 Hrs/110,000 Hrs Mil Std 217, 25C PHYSICAL SPECIFICATIONS Case Material Construction Weight All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted Open Collector Logic “1”/Open=ON Logic “0”/GND=OFF 3000VAC 1000VAC 2500VAC 140 Khz, fixed 75 - 80%, typ Rynite, 94V-0 Rated Encapsulated, Soft Pot PCB / CHA 4.6 oz (128g) / 8.5 oz (238g) Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 MCA-10 1 0 W U l t r a m i n i a t ure Modular Switching Power Supplies series MECHANICAL DIMENSIONS - PCB MOUNT Adjustment Pot Power “Good” Indicator Dual Dual Type / Pin# Single Matched 5/12V Triple 1 AC HI AC HI AC HI AC HI 2 AC LO AC LO AC LO AC LO 3 GND GND GND GND 4 No Pin No Pin No Pin +Vout 5 No Pin No Pin No Pin +/-Com 6 +Vout +Vout 12Vout No Pin 7 No Pin No Pin No Pin -Vout 8 No Pin Out Com +5Vout +5Vout 9 -Vout -Vout Out Com 5V Ret 10 Ctrl Ctrl Ctrl 0.040 [1.02] DIA. TYP. 1.77 [45.0] 0.20 [5.1] 2.56 [65.0] 0.83 [21.0] Tolerance: .XX ± 0.01 [0.25] .XXX ± 0.005 [0.13] Dimensions shown in inch [mm] 0.22 [5.5] Model Ctrl 2.126 [54.0] PERFORMANCE CURVES 100 90 90 80 80 Typical Efficiency, % Output Current, % 70 60 50 40 30 20 70 60 50 10 0 40 -10 0 10 20 30 40 Ambient Temp., DegC WWW.ASTRODYNE.COM 50 60 70 10 25 50 75 100 % of Full Load 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 MCA-10 1 0 W U l t r a m i n i a t ure Modular Switching Power Supplies series MECHANICAL DIMENSIONS - CHASSIS MOUNT ADJUSTMENT POT POWER “GOOD” INDICATOR #3-48 SCREW (3 PLACES) 2.16 [54.9] #3-48 SCREW (6 PLACES) 4 1 5 6 1.780 [45.21] 0.50 [12.7] TYP. (2 PLACES) 2 0.25 [6.4] TYP. (5 PLACES) 7 8 3 9 0.19 [4.8] 0.17 [4.3] TOLERANCE: .XX .XXX ±0.01 [0.25] ±0.005 [0.13] 0.130 [3.30] DIA. TYP. (2 PLACES) ACCEPTS #4 SCREW & NUT 3.430 [87.12] 3.77 [95.8] DIMENSIONS SHOWN IN INCH [MM] 1.00 [25.4] MECHANICAL DIMENSIONS - DIN Rail 0.350 [8.89] Model Type / Pin# Single Match Dual Unmatch Dual Triple 1 AC LO AC LO AC LO AC LO 2 GND GND GND GND 3 AC HI AC HI AC HI AC HI 4 Ctrl Ctrl Ctrl Ctrl 5 -Vout -Vout Com +5 Ret 6 -Vout Com Com +5Vout 7 +Vout Com +5Vout -Vout 8 +Vout +Vout +12Vout +/- Com 9 N/C N/C N/C +Vout DIN Rail mounting kit available for Chassis-mount modules, specify part # M-DRL-01. Kit includes mounting plate, DIN Rail cliip and assembly hardware. 0.100 [2.54] WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181