HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment Display Data Sheet Description Features This 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. Industry standard size Applications Suitable for indoor use Not recommended for industrial application, i.e., operating temperature requirements exceeding +85° C or below -25° C [1] Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor. Industry standard pinout – 7.62 mm (0.4 inch) character height – DIP lead on 2.54 mm Choice of colors – High Efficiency Red (HER), Green, AlGaAs Red, and Yellow Excellent appearance – Evenly lighted segments gray package gives optimum contrast – ± 50° viewing angle Design flexibility – Common anode or common cathode – Single digit – Left and right hand decimal point Categorized for luminous intensity – Green and yellow categorized for color Devices Package Drawing HER Green AlGaAs Red Yellow Description HDSP-331E HDSP-313G HDSP-331A HDSP-331Y Common Anode, Right Hand and Left Hand Decimal A Common Anode, Right Hand and Left Hand Decimal without Pin 4, 5 and 12 A HDSP-332E HDSP-333E HDSP-333G HDSP-333A HDSP-333Y Common Cathode, Right Hand Decimal B HDSP-334E HDSP-334G HDSP-334A HDSP-334Y Common Cathode, Right Hand Decimal C Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options [1] 00: No Mechanical Option Color Bin Options [1,2] 0: No Color Bin Limitation Maximum Intensity Bin [1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] A : AlGaAs Red E : High Efficiency Red G: Green Y : Yellow Device Specific Configuration [1] Refer to Respective Datasheet Package [1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions Package Drawing A TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2–1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E L.DP B C D R.DP 0.30 (0.012) 3.88 (0.153) 7.62 (0.300) NOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12. 3 DIMENSIONS IN MILLIMETERS (INCHES) Package Dimensions Package Drawing B TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2–1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E B C D R.DP 0.30 (0.012) 3.88 (0.153) 4 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) Package Dimensions Package Drawing C TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2–1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E B C D R.DP 0.30 (0.012) 3.88 (0.153) 5 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) Internal Circuit Diagram Common Anode HDSP-331E/331G/331Y/331A/332E 3.14 COM L.DP 6 A 1 B 13 C 10 D 8 E 7 F 2 G R.DP 11 9 PIN N0. CONNECTION 1 CATHODE A 2 CATHODE F 3 COMMON ANODE 6 CATHODE L.DP 7 CATHODE E 8 CATHODE D 9 CATHODE R.DP 10 CATHODE C 11 CATHODE G 13 CATHODE B 14 COMMON ANODE PINS 4, 5, 12: NO CONNECTION FOR HDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332E Common Cathode HDSP-333E/333G/333Y/333A PIN NO. 4.12 COM A 14 B 13 C 8 D 7 E 6 F 1 G 2 DP 9 CONNECTION 1 ANODE F 2 ANODE G 4 COMMON CATHODE 6 ANODE E 7 ANODE D 8 ANODE C 9 ANODE DP 12 COMMON CATHODE 13 ANODE B 14 ANODE A PINS 3, 5, 10, 11: NC HDSP-334E/334G/334Y/334A 1.6 COM A 10 B 9 C 8 D 5 E 2 F 4 G 3 DP 7 PIN NO. CONNECTION 1 COMMON CATHODE 2 ANODE E 3 ANODE G 4 ANODE F 5 ANODE D 6 COMMON CATHODE 7 ANODE DP 8 ANODE C 9 ANODE B 10 ANODE A PINS 11, 12, 13, 14: NC 6 Absolute Maximum Ratings at TA = 25° C Description HER HDSP-33xE Green HDSP-33xG AlGaAs Red HDSP-33xA Yellow HDSP-33xY Power Dissipation Segment 65 65 30 52 mW Forward Current Segment 25 [1] 25 [2] 15 [3] 20 [4] mA Peak Forward Current per Segment (1/10 Duty Factor at 10 kHz) 100 100 80 80 mA Operating Temperature Range -35 to +85 -35 to +85 -35 to +85 -35 to +85 °C Storage Temperature Range -35 to +85 -35 to +85 -35 to +85 -35 to +85 °C Reverse Voltage per Segment or DP 5 5 5 5 V Wavesoldering Temperature for 3 Seconds (at 2 mm Distance from the Body) 250 250 250 250 °C Units Note: 1. Derate above 25° C at 0.33 mA/°C. 2. Derate above 25° C at 0.33 mA/°C. 3. Derate above 25° C at 0.2 mA/°C. 4. Derate above 25° C at 0.27 mA/°C. Electrical/Optical Characteristics at TA = 25° C High Efficiency Red (HER) Device HDSP331E 333E 333E 334E Parameter Symbol Min. Typ. Luminous Intensity/Segment IV Forward Voltage VF 2.05 Peak Wavelength PEAK 635 Max. 1.15 0.8 Dominant Wavelength d Reverse Voltage VR 5 Parameter Symbol Min. Luminous Intensity/Segment IV 0.8 Forward Voltage VF Units Test Conditions mcd IF = 5 mA V IF = 20 mA IF = 10 mA 1.80 2.40 nm 620 nm V IR = 100 A Units Test Conditions Green Device HDSP331G 333G 334G 7 1.80 Typ. Max. 2.00 mcd IF = 10 mA 2.07 V IF = 10 mA 2.25 IF = 20 mA 2.60 Peak Wavelength PEAK 568 nm Dominant Wavelength d 573 nm Reverse Voltage VR 5 V IR = 100 A AlGaAs Red Device HDSP331A 333A 334A Parameter Symbol Luminous Intensity/Segment IV Min. Typ. Max. 3.93 2.001 Units Test Conditions mcd IF = 5 mA IF = 10 mA 4.20 Forward Voltage VF 1.85 2.00 V Peak Wavelength PEAK 660 nm Dominant Wavelength d 643 nm Reverse Voltage VR 5 Parameter Symbol Min. Luminous Intensity/Segment IV Forward Voltage VF 2.15 Peak Wavelength PEAK 595 IF = 20 mA V IR = 100 A Units Test Conditions mcd IF = 5 mA V IF = 20 mA Yellow Device HDSP331Y 333Y 334Y d Reverse Voltage VR 590 5 Bin Name Min. [1] Max. [1] Min. [1] Max. [1] G 0.801 1.250 NA NA H 1.251 2.000 NA NA I 2.001 3.200 2.001 3.200 J NA NA 3.201 5.050 K NA NA 5.051 8.000 Color Bin Limits (nm at 10 mA) Dominant Wavelength (nm) Color Bin Min. Max. Green 3 569.1 571.1 4 571.1 573.1 5 573.1 585.5 1 585.5 588.5 2 588.5 591.5 3 591.5 594.5 Yellow Note: 1. Tolerance for each bin limit is 1 nm. 8 2.60 nm nm V AlGaAs Red Note: 1. Tolerance for each bin limit is ± 10%. IF = 10 mA 1.50 Intensity Bin Limits (mcd at 10 mA) HER/Green/Yellow Max. 0.71 0.80 Dominant Wavelength Typ. IR = 100 A 30 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA High Efficiency Red (HER) HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 120 100 80 60 40 20 100 Figure 1. Maximum allowable average or DC current vs. ambient temperature. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 1.4 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 9 0 Figure 2. Forward current vs. forward voltage. 2.5 0 0 35 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. 30 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Green GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 80 60 40 20 0 0 3.0 1.2 2.5 1.0 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 7. Relative luminous intensity vs. DC forward current. 35 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 Figure 6. Forward current vs. forward voltage. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 100 100 Figure 5. Maximum allowable average or DC current vs. ambient temperature. 10 120 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA 50 Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 16 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA AlGaAs Red AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 80 60 40 20 0 0 3.0 1.2 2.5 1.0 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 11. Relative luminous intensity vs. DC forward current. 35 0.5 1.0 1.5 VF – FORWARD VOLTAGE – V 2.0 2.5 Figure 10. Forward current vs. forward voltage. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 100 100 Figure 9. Maximum allowable average or DC current vs. ambient temperature. 11 120 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA 50 Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 25 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Yellow YELLOW 20 15 10 5 0 0 20 40 60 80 TA – AMBIENT TEMPERATURE – °C 100 80 60 40 20 100 Figure 13. Maximum allowable average or DC current vs. ambient temperature. 0 0 3.5 1.4 3.0 1.2 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 15. Relative luminous intensity vs. DC forward current. 35 0.5 1.0 1.5 2.0 2.5 VF – FORWARD VOLTAGE – V 3.0 3.5 Figure 14. Forward current vs. forward voltage. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 120 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA 50 Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5988-9421EN AV02-3640EN - June 20, 2012