MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier FEATURES • Guardring for overvoltage protection ITO-220AB TO-220AB • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 3 2 1 1 MBR15xxCT PIN 1 PIN 2 PIN 3 CASE 2 • High frequency operation 3 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) MBRF15xxCT PIN 1 PIN 2 • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) PIN 3 TO-263AB K • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 TYPICAL APPLICATIONS 1 For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MBRB15xxCT PIN 1 PIN 2 K HEATSINK MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 7.5 A x 2 VRRM 35 V to 60 V IFSM 150 A VF 0.57 V, 0.65 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Working peak reverse voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 V Maximum average forward rectified current at TC = 105 °C IF(AV) 15 7.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A Peak repetitive reverse surge current per diode at tp = 2.0 µs, 1 kHz IRRM Voltage rate of change (rated VR) dV/dt 10 000 V/µs TJ - 65 to + 150 °C Operating junction temperature range Document Number: 88670 Revision: 08-Nov-07 total device per diode 1.0 0.5 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] A www.vishay.com 1 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT UNIT Storage temperature range TSTG - 65 to + 175 °C Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 7.5 A IF = 7.5 A IF = 15 A IF = 15 A Maximum instantaneous forward voltage per diode (1) Maximum instantaneous reverse current at rated DC blocking voltage per diode (1) SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT UNIT TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.57 0.84 0.72 0.75 0.65 - V TC = 25 °C TC = 125 °C IR 0.1 15 1.0 50 mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJA RθJC 60 3.0 5.0 60 3.0 °C/W Maximum thermal resistance per diode ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR1545CT-E3/45 PREFERRED P/N 1.85 45 50/tube Tube ITO-220AB MBRF1545CT-E3/45 1.99 45 50/tube Tube TO-263AB MBRB1545CT-E3/45 1.35 45 50/tube Tube TO-263AB MBRB1545CT-E3/81 1.35 81 800/reel Tape reel TO-220AB MBR1545CTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB MBRF1545CTHE3/45 (1) 1.99 45 50/tube Tube TO-263AB MBRB1545CTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB (1) 1.35 81 800/reel Tape reel MBRB1545CTHE3/81 Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88670 Revision: 08-Nov-07 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Reverse Current (mA) 25 Average Forward Current (A) Resistive or Inductive Load 20 15 10 5 0 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 100 50 0 150 20 60 40 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode 10 000 175 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 8.3 ms Single Half Sine-Wave 150 Junction Capacitance (pF) Peak Forward Surge Current (A) 10 0.001 0 125 100 75 50 1000 100 MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 10 25 0.1 100 10 1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 10 TJ = 125 °C Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C 1 0.1 MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode Document Number: 88670 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88670 Revision: 08-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1