EPCOS B41691A7108Q007 Axial-lead and soldering star capacitor Datasheet

Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41691, B41791
Date:
December 2006
 EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41691, B41791
Long useful life up to 150 °C
Applications
For automotive applications up to 150 °C
Features
Long useful life, 2000 h at up to 150 °C
Low ESR also at 63 V DC
High ripple current capability
High vibration resistance
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 14
B41691, B41791
Long useful life up to 150 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
25 ... 63 V DC
1.15 VR
100 ... 4000 µF
10/+30% Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
Terminals
Length l (mm)
Approx. ESL (nH)
axial
25
18
20/21
22
26
30
21
24
29
34
39
33
38
45
50
25
6
7
30
6
7
8
10
9
11
39
Useful life
150 °C, VR, 0.5 IAC,R
125 °C, VR, IAC,R
125 °C, VR, IAC,max
105 °C, VR, IAC,max
85 °C, VR, IAC,max
40 °C, VR, 2.1 IAC,R
Voltage endurance test
125 °C; VR
16
29
49
soldering star
14
38
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak
≤ initial specified limit
> 2000 h
> 10000 h
> 4000 h
> 8000 h
> 15000 h
> 500000 h
Post test requirements:
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% initial specified limit
Ileak
≤ initial specified limit
5000 h
Vibration resistance test
To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, at 10 Hz ... 2 kHz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1)
If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 14
B41691, B41791
Long useful life up to 150 °C
Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
dmax × Imax
mm
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Approx. weight
g
5.1
5.7
6.8
8.9
11.7
11.1
14.7
13.5
20.0
25.0
Page 4 of 14
Packing units (pcs.)
Pallet
Reel
288
450
200
350
200
350
180
250
180
160
160
140
140
110
B41691, B41791
Long useful life up to 150 °C
Soldering star capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
dmax × Imax
mm
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
Please read Cautions and warnings and
Important notes at the end of this document.
c ±0.1
mm
12.5
14.5
14.5
16.5
16.5
18.5
18.5
Page 5 of 14
Approx. weight
g
5.4
6.1
7.2
9.4
12.2
11.8
15.4
Packing units
pcs.
480
480
480
300
200
300
200
B41691, B41791
Long useful life up to 150 °C
Overview of available types
VR (V DC)
25
40
63
Case dimensions d × l (mm)
CR (µF)
100
12 × 30
150
14 × 25
14 × 30
220
330
12 × 30
12 × 30
470
14 × 25
14 × 30
20 × 29
560
680
1000
16 × 39
18 × 30
16 × 30
1200
1500
16 × 39
18 × 30
1800
20 × 29
2000
18 × 39
16 × 30
18 × 39
16 × 39
18 × 30
21 × 39
20 × 29
21 × 49
18 × 39
21 × 39
2200
21 × 49
2700
3000
21 × 39
4000
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 14
B41691, B41791
Long useful life up to 150 °C
Case dimensions and ordering codes
VR
V DC
25
40
63
CR
100 Hz
20 °C
µF
330
470
1000
1500
1500 ∇
1800
2000
3000
4000
330
470
680
1000
1000 ∇
1200
1500
2200
2700
100
150
220
470
470 ∇
560
680
1000
1200
Case
dimensions
d×l
mm
12 × 30
14 × 25
16 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 25
14 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
Ordering code
Axial pallet
Ordering code
Axial reel
B41691A5337Q007
B41691A5477Q007
B41691A5108Q007
B41691A5158Q007
B41691B5158Q007
B41691A5188Q007
B41691A5208Q007
B41691A5308Q007
B41691A5408Q007
B41691A7337Q007
B41691A7477Q007
B41691A7687Q007
B41691A7108Q007
B41691B7108Q007
B41691A7128Q007
B41691A7158Q007
B41691A7228Q007
B41691A7278Q007
B41691A8107Q007
B41691A8157Q007
B41691A8227Q007
B41691A8477Q007
B41691B8477Q007
B41691A8567Q007
B41691A8687Q007
B41691A8108Q007
B41691A8128Q007
B41691A5337Q009 B41791A5337Q000
B41691A5477Q009 B41791A5477Q000
B41691A5108Q009 B41791A5108Q000
B41791A5158Q000
B41791B5158Q000
B41791A5208Q000
B41691A7337Q009 B41791A7337Q000
B41691A7477Q009 B41791A7477Q000
B41691A7687Q009 B41791A7687Q000
B41791A7108Q000
B41791B7108Q000
B41791A7158Q000
B41691A8107Q009 B41791A8107Q000
B41691A8157Q009 B41791A8157Q000
B41691A8227Q009 B41791A8227Q000
B41791A8477Q000
B41791B8477Q000
∇ Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code
Soldering star
Page 7 of 14
B41791A8687Q000
B41691, B41791
Long useful life up to 150 °C
Technical data
CR
100 Hz
20 °C
µF
ESRtyp
100 Hz
20 °C
mΩ
VR = 25 V DC
330
175
470
125
1000
65
1500
44
1500 ∇
42
1800
35
2000
31
3000
22
4000
17
VR = 40 V DC
330
150
470
110
680
80
1000
55
1000 ∇
52
1200
44
1500
35
2200
26
2700
21
VR = 63 V DC
100
350
150
240
220
165
470
80
470 ∇
77
560
65
680
54
1000
38
1200
32
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
85 °C
A
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
150 °C
A
290
210
110
73
69
58
50
37
29
1600
1200
550
370
370
300
270
180
135
150
110
60
42
38
32
28
22
17
150
102
55
39
35
30
26
21
16
4.8
5.1
7.3
10.1
10.5
11.3
14.2
16.1
20.2
4.3
4.6
6.5
9.0
9.4
10.1
12.7
14.3
18
3.4
3.7
5.2
7.2
7.5
8.1
10.2
11.5
14.5
2.1
2.2
3.2
4.4
4.6
4.9
6.2
7.0
8.8
1.05
1.1
1.6
2.2
2.3
2.4
3.1
3.5
4.4
240
170
120
80
77
55
53
39
30
1250
900
600
410
410
320
270
185
150
115
85
65
45
40
35
27
21
18
105
77
60
41
37
33
25
20
17
5.3
6.4
7.3
10.0
10.3
11.2
14.2
16.1
20.1
4.8
5.7
6.5
8.9
9.2
10.0
12.7
14.3
17.9
3.8
4.6
5.2
7.2
7.4
8.0
10.2
11.5
14.4
2.3
2.8
3.1
4.3
4.5
4.9
6.2
7.0
8.7
1.15
1.4
1.5
2.1
2.2
2.4
3.1
3.5
4.3
350
240
170
120
114
75
78
47
38
1900
1300
900
410
410
320
280
200
160
160
115
80
42
38
34
27
21
17
150
110
76
40
36
33
25
20
16
4.7
5.1
6.5
10.1
10.5
11.3
14.3
16.1
20.1
4.2
4.5
5.8
9.0
9.3
10.1
12.8
14.3
18.0
3.3
3.6
4.6
7.2
7.5
8.1
10.3
11.5
14.4
2.0
2.2
2.8
4.4
4.5
4.9
6.2
7.0
8.8
1.0
1.1
1.4
2.2
2.3
2.4
3.1
3.5
4.4
∇ Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 14
B41691, B41791
Long useful life up to 150 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at VR1)
Useful life
depending on case temperature TC under ripple current operating conditions at VR1)
1)
Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 14
B41691, B41791
Long useful life up to 150 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Typical behavior for 470 µF/63 V
Impedance Z
versus frequency f
Typical behavior for 470 µF/63 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 14
B41691, B41791
Long useful life up to 150 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 14
B41691, B41791
Long useful life up to 150 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1.
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 14
B41691, B41791
Long useful life up to 150 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
Chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 14
Reference
Chapter "Capacitors
with screw terminals"
"Screw terminals accessories"
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 14 of 14
Similar pages