AZ8462 MICROMINIATURE POLARIZED RELAY FEATURES • SMT and DIP mounting available • Microminiature size: up to 50% less board area than previous generation telecom relays • High dielectric and surge voltage: 2.5 kV surge (per Bellcore TA-NWT-001089) 1.5 kV surge (per FCC Part 68) 1,000 Vrms, open contacts 2,000 Vrms, coil to contacts • Monostable and bistable (latching) versions available • Minimum switching load 10 mV, 10 µA • Low power consumption: 79 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 CONTACTS GENERAL DATA Life Expectancy Mechanical Minimum operations 1 x 108 5 x 105 at 1 A 30 VDC, resistive 1 x 105 at 2 A 30 VDC, resistive 1 x 105 at 0.5 A 120 VAC, resistive Electrical Operate Time (max.) 4 ms at nominal coil voltage Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Release Time (max.) 4 ms at nominal coil voltage (with no coil suppression) Ratings Resistive load: Dielectric Strength (at sea level for 1 min.) 2000 Vrms coil to contact 1500 Vrms between contact sets 1000 Vrms between open contacts Max. switched power: 60 W or 62.5 VA Max. switched current: 2 A Max. switched voltage: 220 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL 3 A at 30 VDC, resistive, 85°C, 100k cycles 2 A at 30 VDC resistive, 105°C, 100k cycles * 0.3 A at 110 VDC, resistive, 85°C, 100k cycles 0.5 A at 125 VAC, general use, 85°C Surge Voltage Coil to contacts Open contacts 2500 V (at 2/10 µs) 1500 V (at 10/160 µs) Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 105°C (221°F) Vibration 3.3 mm DA at 10–55 Hz * not approved for 48 VDC coil or latching versions. Shock 75 g operating, 100 g damage Material Silver nickel gold plated Enclosure P.B.T. polyester Resistance < 50 milliohms initially Terminals Tinned copper alloy, P.C. Max. Solder Temp. see soldering profile Max. Solder Time see soldering profile Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 2.3 grams Packing unit in pcs 40 per plastic tube 400 per reel COIL Power At Pickup Voltage (typical) Monostable: 79 mW (1.5 - 24 VDC coil) Monostable: 152 mW (48 VDC coil) Bistable latching (single coil): 57 mW Bistable latching (dual coil): 114 mW Max. Continuous Dissipation 0.39 W at 20°C (68°F) ambient Temperature Rise (at nominal voltage) 25°C (45°F) at nominal coil voltage Temperature Max. 155°C (311°F) Class F NOTES 1. 2. 3. 4. All values at 20°C (68°F) Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-26 AZ8462 RELAY ORDERING DATA SINGLE COIL COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Coil Resistance Ohm ± 10 THT SMT 1.5 1.13 2.2 16 AZ8462-1.5 AZ8462S-1.5 3 2.25 4.5 64.3 AZ8462-3 AZ8462S-3 4.5 3.38 6.7 145 AZ8462-4.5 AZ8462S-4.5 5 3.75 7.5 178 AZ8462-5 AZ8462S-5 6 4.5 9.0 257 AZ8462-6 AZ8462S-6 9 6.75 13.5 579 AZ8462-9 AZ8462S-9 12 9.0 18.0 1,028 AZ8462-12 AZ8462S-12 24 18.0 36.0 4,114 AZ8462-24 AZ8462S-24 48 36.0 57.6 8,533 AZ8462-48 AZ8462S-48 SINGLE COIL LATCHING COIL SPECIFICATIONS Nominal Coil VDC Set/Reset VDC Max. Continuous VDC ORDER NUMBER* Coil Resistance Ohm ± 10 THT SMT 1.5 1.13 2.7 22.5 AZ8462P1-1.5 AZ8462P1S-1.5 3 2.25 5.4 90 AZ8462P1-3 AZ8462P1S-3 4.5 3.38 8.1 203 AZ8462P1-4.5 AZ8462P1S-4.5 5 3.75 9.0 250 AZ8462P1-5 AZ8462P1S-5 6 4.5 10.8 360 AZ8462P1-6 AZ8462P1S-6 9 6.75 16.2 810 AZ8462P1-9 AZ8462P1S-9 12 9.0 21.6 1,440 AZ8462P1-12 AZ8462P1S-12 24 18.0 43.2 5,760 AZ8462P1-24 AZ8462P1S-24 DUAL COIL LATCHING COIL SPECIFICATIONS Nominal Coil VDC Set/Reset VDC Max. Continuous VDC ORDER NUMBER* Coil Resistance Ohm ± 10 THT SMT 1.5 1.13 2.2 11.2 AZ8462P2-1.5 AZ8462P2S-1.5 3 2.25 4.5 45 AZ8462P2-3 AZ8462P2S-3 4.5 3.38 6.7 101 AZ8462P2-4.5 AZ8462P2S-4.5 5 3.75 7.5 125 AZ8462P2-5 AZ8462P2S-5 6 4.5 9.0 180 AZ8462P2-6 AZ8462P2S-6 9 6.75 13.5 405 AZ8462P2-9 AZ8462P2S-9 12 9.0 18.0 720 AZ8462P2-12 AZ8462P2S-12 24 18.0 36.0 2,880 AZ8462P2-24 AZ8462P2S-24 * Add suffix “1” after “S” for SMT short terminals (available for SMT version only). Add suffix “TR” at the end of order number for Tape and Reel packing (available for SMT version only). ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-26 AZ8462 MECHANICAL DATA Outline Dimensions(DIP type) Viewed Toward Terminals SINGLE SIDE STABLE & 1 COIL LATCHING .598MAX [15.20] 2 COIL LATCHING .303MAX [7.70] .362MAX [9.20] .024 [0.60] PC Board Layout (DIP type) .598MAX [15.20] .303MAX [7.70] .200 [5.08] .100 .100 [2.54] [2.54] .362MAX [9.20] .024 [0.60] .130 [3.30] .045 [1.15] .200 [5.08] .130 [3.30] 8-Ø0.039 [Ø1.00] .045 [1.15] SINGLE SIDE STABLE & 1 COIL LATCHING .100 .200 [5.08] [2.54] .200 .100 [5.08] [2.54] .200 .100 .100 .100 [5.08] [2.54] [2.54] [2.54] .200 [5.08] .200 [5.08] .200 [5.08] Outline Dimensions(SMT Type ) SINGLE SIDE STABLE & 1 COIL LATCHING .598MAX [15.20] 2 COIL LATCHING PC Board Layout (SMT type) .598MAX [15.20] .303MAX [7.70] .303MAX [7.70] .039 [1.00] .362MAX [9.20] .024 [0.60] .045 [1.15] .362MAX [9.20] .382MAX [9.70] .024 [0.60] .045 [1.15] .200 [5.08] .374MAX [9.50] .020 [0.50] .200 .100 [5.08] [2.54] 10-Ø0.039 [Ø1.00] 2 COIL LATCHING .382MAX [9.70] .200 [5.08] .100 .100 [2.54] [2.54] .122 [3.11] .283 [7.19] .200 [5.08] .374MAX [9.50] .200 .100 [5.08] [2.54] SINGLE SIDE STABLE & 1 COIL LATCHING .039 [1.00] .200 [5.08] .100 .100 .100 [2.54] [2.54] [2.54] 0.122 [3.11] .283 [7.19] Outline Dimensions(S1 type: Short SMT) SINGLE SIDE STABLE & 1 COIL LATCHING .598MAX [15.20] 2 COIL LATCHING .598MAX [15.20] .303MAX [7.70] 2 COIL LATCHING .303MAX [7.70] PC Board Layout (Type S : Short SMT) .362MAX [9.20] .024 [0.60] .045 [1.15] .020 [0.50] .200 .100 [5.08] [2.54] .362MAX [9.20] .382MAX [9.70] .024 [0.60] .045 [1.15] .200 [5.08] .295MAX [7.50] .382MAX [9.70] .200 [5.08] .295MAX [7.50] .200 .100 [5.08] [2.54] .039 [1.00] .247 [6.29] Wiring Diagram 12 SINGLE SIDE STABLE & 1 COIL LATCHING .100 .100 .100 .200 [5.08] [2.54] [2.54] [2.54] 0.122 [2.21] 10 9 8 SINGLE SIDE STABLE 3 + 1- 4 - + 12 +1 5 3 4 5 6+ 10 9 8 1 COIL LATCHING .247 [6.29] RESET 5 SET 4 RESET 3 SET - .100 .100 [2.54] [2.54] .122 [2.21] .039 [1.00] + 1 .200 [5.08] - 12 10 9 8 7 - 2 COIL LATCHING 2 COIL LATCHING Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-26 AZ8462 PACKAGING Tape and reel for SMT version with long terminals - “S” Section B-B Section A-A 1.5 2 0.1 ± 0.1 10.4 1.75 4 ± ± 0.1 A 3.5 Ø 2 min. B B 16.5 ± 0.2 24 ± 0.3 11.5 20˚ 3˚ max. 11 ± 0.2 0.5 ± 0.05 3˚ max. 16 A Tape and reel for SMT version with short terminals - “S1” Section B-B Section A-A 4 ± 0.1 2 ± 0.1 10.4 1.75 1.5 ± 0.1 A 3.5 Ø 2 min. B B 16.5 ± 0.2 24 ± 0.3 11.5 20˚ 3˚ max. 9.2 ± 0.2 0.5 ± 0.05 3˚ max. 16 A SOLDERING DATA IRS (Infrared Reflow Soldering) TEMPERATURE (˚C) SOLDERING T4 T3 COOLING T 4 = 245˚C MAX T 3 = 220˚C MAX T 2 = 180˚C MAX T2 T 1 = 150˚C MAX PREHEATING T1 60 SEC MAX 100 SEC MAX 100 SEC MAX ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-26