Revised August 2004 NC7SU04 TinyLogic HS Unbuffered Inverter General Description Features The NC7SU04 is a single special purpose CMOS Inverter. The inverter circuit is designed with a single unbuffered stage to facilitate use in crystal oscillator applications. It is not intended for use in logic inversion applications. ■ Space saving SOT23 or SC70 5-lead package Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation over a broad VCC range. ESD protection diodes inherently guard both input and output with respect to the VCC and GND rails. ■ Ultra small MicroPak leadless package ■ Unbuffered for crystal oscillator applications ■ Low Quiescent Power; ICC < 1 µA ■ Balanced Output Drive; 2 mA IOL, −2 mA IOH ■ Broad VCC Operating Range; 2V–6V ■ Balanced Propagation Delays ■ Specified for 3V operation Ordering Code: Package Product Code Number Top Mark NC7SU04M5X MA05B 7SU4 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7SU04P5X MAA05A SU4 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SU04L6X MAC06A E5 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Order Number Package Description Logic Symbol Supplied As Connection Diagrams IEEE/IEC Pin Assignments for SOT23 and SC70 Pin Descriptions Pin Names Description A Input Y Output NC No Connect (Top View) Pad Assignments for MicroPak Function Table Y=A Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak are trademarks of Fairchild Semiconductor Corporation. © 2004 Fairchild Semiconductor Corporation DS012142 www.fairchildsemi.com NC7SU04 TinyLogic HS Unbuffered Inverter October 1995 NC7SU04 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage (VCC) @ VIN ≤ −0.5V −20 mA Input Voltage (VIN) @ VIN ≥ VCC +0.5V +20 mA Output Voltage (VOUT) DC Input Voltage (VIN) −0.5V to VCC + 0.5V 2.0V to 6.0V 0V to VCC 0V to VCC −40°C to +85°C Operating Temperature (TA) Thermal Resistance (θJA) DC Output Diode Current (IOK) @ VOUT < −0.5V −20 mA SOT23-5 300°C/W @ VOUT > VCC +0.5V +20 mA SC70-5 425°C/W DC Output Voltage (VOUT) −0.5V to VCC + 0.5V DC Output Source ±12.5 mA or Sink Current (IOUT ) DC VCC or Ground Current Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specifications. ±25 mA per Output Pin (ICC or IGND) −65°C to +150°C Storage Temperature (TSTG) 150°C Junction Temperature (TJ) Note 2: Unused inputs must be held HIGH or LOW. They may not float. Lead Temperature (TL); 260°C (Soldering, 10 seconds) DC Electrical Characteristics Symbol VIH VIL Parameter HIGH Level Input Voltage LOW Level Input Voltage TA = +25°C VCC Typ Min 2.0 1.70 1.70 3.0 2.45 2.45 4.5 3.60 3.60 HIGH Level Output Voltage Max Min 6.0 4.80 Max 0.30 3.0 0.50 0.50 4.5 0.90 0.90 1.20 1.80 Conditions 4.80 0.30 2.0 Units V 2.0 6.0 VOH TA = −40°C to +85°C (V) V 1.20 2.0 1.80 3.0 2.5 3.0 2.50 4.5 4.00 4.5 4.00 6.0 5.50 5.9 5.50 3.0 2.68 2.82 2.63 4.5 4.18 4.33 4.13 6.0 5.68 5.76 5.63 V IOH = −20 µA VIN = VIL VIN = GND VOL LOW Level Output Voltage V IOH = −1.3 mA IOH = −2 mA IOH = −2.6 mA 2.0 0.00 0.20 0.20 3.0 0.00 0.50 0.50 4.5 0.01 0.50 0.50 6.0 0.04 0.50 0.50 3.0 0.11 0.26 0.33 4.5 0.12 0.26 0.33 6.0 0.15 0.26 0.33 V IOL = 20 µA VIN = VIH VIN = VCC V IOL = 1.3 mA IOL = 2 mA IOL = 2.6 mA IIN Input Leakage Current 6.0 ±0.1 ±1.0 µA VIN = VCC, GND ICC Quiescent Supply Current 6.0 1.0 10.0 µA VIN = VCC, GND www.fairchildsemi.com 2 Symbol tPLH, Parameter Propagation Delay tPHL tTLH, Output Transition Time tTHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = +25°C VCC (V) Min Typ TA = −40°C to +85°C Max Min Max 5.0 3 15 2.0 17 100 125 3.0 9 27 35 4.5 7 20 25 6.0 6.5 17 21 5.0 4 10 2.0 25 125 155 3.0 16 35 45 4.5 12 25 31 6.0 10 21 26 Open 2 10 10 5.0 4 Units Conditions Figure Number ns CL = 15 pF ns CL = 50 pF ns CL = 15 pF ns CL = 50 pF Figures 1, 3 (Note 3) Figure 2 Figures 1, 3 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; PRR = variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SU04 AC Electrical Characteristics NC7SU04 Tape and Reel Specification TAPE FORMAT for SOT23 and SC70 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 0.138 ± 0.002 0.055 ± 0.004 (3.5 ± 0.05) 4 (1.4 ± 0.11) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) 0.157 0.315 ± 0.012 (4) (8 ± 0.3) TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7SU04 Tape and Reel Specification NC7SU04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7SU04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7SU04 TinyLogic HS Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8