Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch v1.0a / Feb, 2013 IGPS-9080 Series IGPS-9080 Series Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. Industrial Ethernet Switch 1 Features ▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Supports standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port ▪ Supports PoE scheduled configuration and PoE auto-ping check function ▪ Supports IEEE 1588v2 clock synchronization (-NP model is not supported) ▪ Supports IPV6 new internet protocol version ▪ Supports Modbus TCP protocol ▪ Supports IEEE 802.3az Energy-Efficient Ethernet technology ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Supports SMTP client ▪ Supports IP-based bandwidth management ▪ Supports application-based QoS management ▪ Supports Device Binding security function ▪ Supports DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Supports ACL, TACACS+ and 802.1x User Authentication for security ▪ Supports 9.6K Bytes Jumbo Frame ▪ Multiple notification for warning of unexpected event ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Supports LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled ▪ Supports backup unit device DBU-01 to quickly configuration backup/restore P.S.E Full Gigabit O-Ring Introduction IGPS-9080 series are managed redundant ring PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9080 series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9080 series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40oC to 70oC. IGPS-9080 series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for highly-managed Ethernet application. ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. *NOTE: This function is available by request only 1-336 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch v1.0a / Feb, 2013 ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and costeffectiveness in one set of network redundancy topology. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. Industrial Media Converter ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. Industrial Ethernet Switch ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. Industrial Cellular VPN Router IP Camera IP Camera IP Camera Industrial M2M Gateway IGPS-9080 IP Camera Industrial Wireless Access Point ▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications. Industrial Device Server ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. O-Ring Accessories IGPS-9080 IGPS-9080 Network Management Software PoE Link *NOTE: This function is available by request only D esign ed for R u gged E xcellence 1-337 Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch v1.0a / Feb, 2013 Open-Vision ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Industrial Ethernet Switch 1 Commander Host Monitor Topology View Dimensions (Unit=mm) 1-338 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch v1.0a / Feb, 2013 Industrial Ethernet Switch PoE Pin Definition 10/100Base-T(X) P.S.E. RJ-45 Port RJ-45 Pin Definition Description #1 TD+ with PoE Power input + #2 TD- with PoE Power input + #3 RD+ with PoE Power input - #6 RD- with PoE Power input - Industrial Media Converter Pin No. 1000Base-T P.S.E. RJ-45 Port Pin No. Description #1 BI_DA+ with PoE Power input + BI_DA- with PoE Power input + BI_DB+ with PoE Power input - #4 BI_DC+ #5 BI_DC- #6 BI_DB- with PoE Power input - #7 BI_DD+ #8 BI_DD- Industrial Wireless Access Point #2 #3 Industrial Device Server RJ-45 Pin Definition ORing Switch Model IGPS-9080 IGPS-9080-NP IGPS-9080-24V IGPS-9080-NP-24V Physical Ports 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX 8 8k Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency: 7 μs Switching bandwidth: 28Gbps Max. Number of Available VLANs : 4095 VLAN ID Range : 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Network Management Software MAC Table Accessories PoE Output Watts IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588v2 clock synchronization IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) 12 ~24VDC : 60Watts Max. 240 Watts Max. 24 ~ 57VDC : 120Watts Max. Industrial M2M Gateway Technology Ethernet Standards Industrial Cellular VPN Router Specifications D esign ed for R u gged E xcellence 1-339 Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch Jumbo frame Security Features Industrial Ethernet Switch 1 Software Features v1.0a / Feb, 2013 Up to 9.6K Bytes Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP Network Redundancy O-Ring Open-Ring O-Chain MRP*NOTE MSTP (RSTP/STP compatible) RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 LED Indicators Power Indicator Green : Power LED x 3 Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Amber : Indicates unexpected event occurred Green for port Link/Act. Dual color LED for speed indicator : Green (1000M) / Amber (100M) / Off-light (10M). Green for PoE power injected O-Ring Indicator (Ring) Fault indicator 10/100/1000Base-T(X) RJ45 port indicator PoE indicator Fault contact Relay Relay output to carry capacity of 1A at 24VDC Clock Synchronization IEEE 1588v2 Support Supported Unsupported Redundant Input power Power consumption (Typ.) (PoE output not included) Overload Current Protection Dual DC inputs. 50~57VDC on 6-pin terminal block Dual DC inputs. 12~57VDC on 6-pin terminal block 11 Watts 12 Watts 12 Watts Reverse polarity protection NOT Present 779 g 777 g Power 11 Watts Present Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 54.1(W)x106.1(D)x145.4(H) mm (2.13x4.18x5.72 inch.) Weight (g) 773 g Environmental Storage Temperature -40 to 85°C (-40 to 185°F ) Operating Temperature -40 to 75°C (-40 to 167°F ) Operating Humidity 5% to 95% Non-condensing *NOTE: This function is available by request only 1-340 w w w.oring - net wo rk in g.co m 771 g Industrial Ethernet Switch DIN-Rail Managed Gigabit PoE Ethernet Switch v1.0a / Feb, 2013 EMI Industrial Ethernet Switch Regulatory Approvals FCC Part 15, CISPR (EN55022) class A EMS Industrial Media Converter Shock Free Fall Vibration Safety MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) Warranty EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 IEC60068-2-27 IEC60068-2-32 IEC60068-2-6 EN60950-1 311,532 5 years Industrial Device Server Ordering Information I G P S -9 A A B - CC -DDD Option 10/100/1000Base-T(X) P.S.E. Port Number - 08: 8 ports Model Name - 0: 0 ports IEEE 1588v2 function -NP: unsupported IEEE 1588v2 Voltage supported type -24V: 24VDC power inputs supported Description Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. IGPS-9080-NP Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. IGPS-9080-24V Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., 24VDC power inputs IGPS-9080-NP-24V Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., 24VDC power inputs Packing List ‧IGPS-9080 Series ‧DIN-Rail Kit ‧Wall-mount Kit ‧Console Cable ‧ORing Tool CD ‧Quick Installation Guide Optional Accessories (Can be purchased separately) ‧Open-Vision M500, Powerful Network Management Windows Utility Suite, 500 IP device ‧DBU-01 : Backup unit device Industrial M2M Gateway IGPS-9080 Industrial Cellular VPN Router Available Model Additional Port Number Industrial Wireless Access Point Code Definition Accessories Network Management Software D esign ed for R u gged E xcellence 1-341