Reflective Object Sensor OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ Features: • • • • Low profile to facilitate stacking Low cost plastic housing Choice of phototransistor or photodarlington output #26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths Product Photo Here Description: OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NPN silicon phototransistor, mounted side-by-side on converging optical axes in a black plastic housing. OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and a NPN silicon photodarlington, mounted side-by-side on converging optical axes in a black plastic housing. The interconnect wires for these devices are are UL approved #26 AWG, with Teflon insulation, stripped and tinned. The OPB700 and OPB701 have 4” (101 mm) wire length while the OPB700ALZ and OPB701ALZ have 18” (457 mm) wire length. Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: • • • • • • Ordering Information Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor Part Number OPB700Z OPB700ALZ OPB701Z OPB701ALZ RoHS LED Peak Wavelength Sensor Reflection Distance Inch (mm) 4" / 26 AWG Wire Transistor 0.200" (5.08mm) 890 nm Lead Length / Spacing Darlington 18" / 26 AWG Wire 4" / 26 AWG Wire 18" / 26 AWG Wire OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 1 02/07 Page 1 of 5 Reflective Object Sensor OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ OPB700Z, OPB701Z DIMENSIONS ARE IN: [ MILLIMETERS] INCHES See Chart Reflective Surface Reflective Surface 3 4 2 1 4 3 2 1 Part Number Wire Length OPB701 OPB700Z 4” Min Color/Pin # LED Color/Pin # LED OPB700ALZ 18” Min Red-3 Anode White-2 Collector OPB701Z 4” Min Black-4 Cathode Green-1 Emitter OPB701ALZ 18” Min OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A1 02/07 Page 2 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage Temperature Range -40° C to + 125° C Operating Temperature Range -40° C to + 100° C Lead Soldering Temperature 260° C Input Diode Continuous Forward Current 100 mA Reverse Voltage 2V Power Dissipation(1) 80 mW Output Phototransistor Collector-Emitter Voltage OPB700Z, OPB700ALZ OPB70Z1, OPB701ALZ 24 V 15 V Emitter-Collector Voltage 5V Power Dissipation(1) 50 mW Notes: (1) Derate linearly 1.07 mW/°C above 25 ° C. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode VF Forward Voltage - - 1.7 V IF = 50 mA IR Reverse Current - - 100 µA VR = 2 V 25 15 - - V V IC = 100 µA IC = 100 µA 5 - - V IE = 100 µA - - 100 250 nA nA VCE = 10 V, IF = 0, EE = ≤0.1 µW/cm2 VCE = 10 V, IF = 0, EE = ≤0.1 µW/cm2 Output Phototransistor V(BR)CEO Collector-Emitter Breakdown Voltage OPB700Z, OPB700ALZ OPB701Z, OPB701ALZ V(BR)ECO Emitter-Collector Breakdown Voltage ICEO Collector Dark Current OPB700Z, OPB700ALZ OPB701Z, OPB701ALZ Notes: (1) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 1 02/07 Page 3 of 5 Reflective Object Sensor OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Coupled Parameters OPB700Z, OPB700ALZ (Phototransistor) Collector current IC(ON) VCE(SAT) ICX VCE = 5.0V(1), IF = 40mA 0.10 - 2.50 mA Saturation Voltage - - 0.40 V IC = 10µA, IF = 40mA Leakage Current - - 2.00 µA VCE = 5.0V, IF = 40mA, NO Reflective Surface VCE = 5.0V(1) Coupled Parameters OPB701Z, OPB701ALZ (Photodarlington) IC(ON) Collector current VCE(SAT) ICX 2.50 - 43.00 mA Saturation Voltage - - 1.10 V IC = 10µA, IF = 40mA Leakage Current - - 20.0 µA VCE = 5.0V, IF = 40mA, NO Reflective Surface Notes: (1) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. OPB700 - Normalized Collector Current vs Distance OPB700 - Normalized Collector Current vs Forward Current vs Temperature 1.60 2.5 Normalized with Kodak 90% and Distance = 0.15" 1.40 Normalized Collector Current at 20mA and 20°C Kodak 90% Kodak 18% Normalized Collector Current Normalized Collector Current 2.0 Copier Paper 1.20 Avery Label Retro Reflective 1.00 0.80 0.60 0.40 1.5 1.0 -40° C -20° C 0° C 20° C 40° C 0.5 60° C 80° C 0.20 0.0 0.00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 Distance(inches) 0.7 0.8 0.9 1.0 0 5 10 15 20 25 30 35 40 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A1 02/07 Page 4 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB700Z, OPB700ALZ, OPB701Z, OPB701ALZ OPB701 - Normalized Collector Current vs Forward Current vs Temperature OPB701 - Normalized Collector Current vs Distance 2.5 1.4 Normalized with Kodak 90% and Distance = 0.150" Normalized Collector Current at 20mA and 20°C 1.2 Copier Paper 1.0 -40° C 2.0 Kodak 18% Normalized Collector Current Normalized Collector Current Kodak 90% Avery Label Retro Reflective 0.8 0.6 0.4 -20° C 0° C 20° C 40° C 1.5 60° C 80° C 1.0 0.5 0.2 0.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 5 10 15 20 25 30 35 40 Forward Current - mA Distance (inches) LED—Forward Voltage vs Forward Current OPB701 - Forward Voltage vs Forward Current vs vs Temperature Temperature 1.60 Typical Forward Voltage (volts) 1.50 1.40 1.30 1.20 -40° C -20° C 0° C 1.10 20° C 40° C 60° C 80°C 1.00 0.90 0 5 10 15 20 25 30 35 40 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 1 02/07 Page 5 of 5