Lead-free MMBZ5V6AL - MMBZ33VAL 24W AND 40W PEAK POWER DUAL SURFACE MOUNT TVS NEW PRODUCT Features · · Dual TVS in Common Anode Configuration · · · · 225 mW Power Dissipation 24W/40W Peak Power Dissipation Rating @ 1.0ms (Unidirectional) SOT-23 A Dim Min Max A 0.37 0.51 B 1.20 1.40 TOP VIEW C 2.30 2.50 D D 0.89 1.03 E 0.45 0.60 G 1.78 2.05 H 2.80 3.00 J 0.013 0.10 Polarity: See Diagram K 0.903 1.10 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). L 0.45 0.61 M 0.085 0.180 a 0° 8° Ideally Suited for Automatic Insertion Low Leakage B C Lead Free/RoHS Compliant (Note 5) Mechanical Data · · E Case: SOT-23 H Case Material: Molded Plastic. UL Flammability Classification 94V-0 · · · · G K Moisture Sensitivity: Level 1 per J-STD-020C M J L Terminals: Solderable per MIL-STD-202, Method 208 · · · · · Marking: Marking Code & Date Code, See Page 2 Marking Code: See Table Below and Page 2 All Dimensions in mm Ordering Information: See Page 2 ESD Rating Exceeding 16kV per the Human Body Model (Note 4) Weight: 0.008 grams (approximate) Maximum Ratings @TA = 25°C unless otherwise specified Symbol Value Unit Power Dissipation (Note 1) Characteristic Pd 225 mW Peak Power Dissipation (Note 2) MMBZ5V6AL - MMBZ10VAL Ppk 24 W Peak Power Dissipation (Note 2) MMBZ15VAL - MMBZ33VAL Ppk 40 W Thermal Resistance, Junction to Ambient Air (Note 1) RqJA 556 °C/W Tj,TSTG –65 to +150 °C Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified 24 Watt (VF = 0.9V max @ IF = 10mA) Type Number Marking Code MMBZ5V6AL K9A VRWM VC @ IPP (Note 2) Breakdown Voltage IR @ VRWM VBR (Note 3) (V) @ IT VC IPP Typical Temperature Coefficient Volts mA Min Nom Max mA V A Tc (mV/°C) 3 5.0 5.32 5.6 5.88 20 8.0 3.0 1.8 24 Watt (VF = 1.1V max @ IF = 200mA) Type Number Marking Code VC @ IPP (Note 2) VRWM IR @ VRWM Breakdown Voltage @ IT VC IPP Typical Temperature Coefficient Volts mA Min Nom Max mA V A Tc (%/°C) VBR (Note 3) (V) MMBZ6V2AL K9B 3.0 0.5 5.89 6.2 6.51 1.0 8.7 2.76 +0.04 MMBZ6V8AL K9C 4.5 0.5 6.46 6.8 7.14 1.0 9.6 2.5 +0.045 MMBZ9V1AL K9D 6.0 0.3 8.65 9.1 9.56 1.0 14 1.7 +0.065 MMBZ10VAL K9E 6.5 0.3 9.50 10 10.5 1.0 14.2 1.7 +0.065 Note: 1. Device mounted on FR-5 PCB 1.0 x 0.75 x 0.062 inch pad layout as shown on Diodes Inc. suggested pad layout AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 200mW per element must not be exceeded. 2. Non-repetitive current pulse per Figure 2 and derate above TA = 25°C per Figure 1. 3. Short duration pulse test used to minimize self-heating effect. 4. MMBZ5V6AL and MMBZ15VAL exceed 16kV ESD rating, all other voltages exceed 8kV ESD rating. 5. No purposefully added lead. DS30306 Rev. 9 - 2 1 of 4 www.diodes.com MMBZ5V6AL - MMBZ33VAL ã Diodes Incorporated VC @ IPP (Note 2) Breakdown Voltage IPP Typical Temperature Coefficient V A Tc (%/°C) 21 1.9 +0.080 25 1.6 +0.090 1.0 28 1.4 +0.090 1.0 40 1.0 +0.090 1.0 46 0.87 +0.090 VRWM IR @ VRWM Volts nA Min Nom Max mA 12 50 14.25 15 15.75 1.0 K9L 14.5 50 17.10 18 18.90 1.0 MMBZ20VAL K9N 17 50 19.00 20 21.00 MMBZ27VAL K9Q 22 50 25.65 27 28.35 MMBZ33VAL K9T 26 50 31.35 33 34.65 Type Number Marking Code MMBZ15VAL K9K MMBZ18VAL Ordering Information VBR (Note 3) (V) @ IT VC (Note 6) Device Packaging Shipping (Type number)-7*-F SOT-23 3000/Tape & Reel * Example: 5.6V type = MMBZ5V6AL-7-F. Notes: 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. YM Marking Information XXX XXX = Product Type Marking Code YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September Date Code Key Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 Code M N P R S T U V W Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IP, PEAK PULSE CURRENT (%Ipp) 100 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT NEW PRODUCT 40 Watt (VF = 1.1V max @ IF = 200mA) 75 50 25 100 Peak Value Ipp Half Value Ipp/2 50 10 X 1000 Waveform as defined by R.E.A. tp 0 10 X 1000 Waveform as defined by R.E.A. 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Pulse Derating Curve DS30306 Rev. 9 - 2 0 1 2 3 t, TIME (ms) Fig. 2 Pulse Waveform 2 of 4 www.diodes.com MMBZ5V6AL - MMBZ33VAL 80 f = 1MHz 240 f = 1MHz 70 C, CAPACITANCE (pF) 280 C, CAPACITANCE (pF) MMBZ5V6AL 200 160 120 80 60 MMBZ15VAL 50 40 30 MMBZ27VAL 20 40 10 0 0 0 1 3 2 0 BIAS (V) Fig. 3 Typical Capacitance vs. Bias Voltage (Lower curve is Bidirectional mode, Upper curve is Unidirectional mode) 1 2 3 BIAS (V) Fig. 4 Typical Capacitance vs. Bias Voltage (Lower curve is Bidirectional mode, Upper curve is Unidirectional mode) PD, POWER DISSIPATION (mW) 300 250 200 150 FR-5 Board 100 50 0 0 25 50 75 100 125 175 150 TA, AMBIENT TEMPERATURE Fig. 5 Steady State Power Derating Curve 100 Tj = 25°C Ppk, PEAK PULSE POWER (W) NEW PRODUCT 320 Non Repetitive Pulse Waveform (Rectangular) Bidirectional 10 Unidirectional 1.0 0.1 0.1 1.0 10 100 1000 10000 PULSE WIDTH (ms) Fig. 6 Pulse Rating Curve, Ppk (W) vs. Pulse Width (ms) Power is defined as Ppk = VC x Ipp DS30306 Rev. 9 - 2 3 of 4 www.diodes.com MMBZ5V6AL - MMBZ33VAL Ppk (NOM), PEAK PULSE POWER (W) NEW PRODUCT 100 Tj = 25°C Non Repetitive Pulse Waveform (Rectangular) Bidirectional 10 Unidirectional 1.0 0.1 0.1 1.0 10 100 1000 10000 PULSE WIDTH (ms) Fig. 7 Pulse Rating Curve, Ppk (NOM) (W) vs. Pulse Width (ms) Power is defined as Ppk(NOM) = VZ(NOM) x Ipp where VZ(NOM) is the nominal Zener voltage measured at the low test current used for voltage classification IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30306 Rev. 9 - 2 4 of 4 www.diodes.com MMBZ5V6AL - MMBZ33VAL