Renesas HD74LV2G53AUSE 2-channel analog multiplexer / demultiplexer Datasheet

HD74LV2G53A
2–channel Analog Multiplexer / Demultiplexer
REJ03D0094–0400Z
(Previous ADE-205-567C (Z))
Rev.4.00
Sep.25.2003
Description
The HD74LV2G53A has 2–channel analog multiplexer / demultiplexer in an 8 pin package. Applications
include signal gating, chopping, modulation, or demodulation (modem), and signal multiplexing for analog
to digital and digital to analog conversion systems. Low voltage and high-speed operation is suitable for
the battery powered products (e.g., notebook computers), and the low power consumption extends the
battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Electrical characteristics equivalent to the HD74LV4053A
Supply voltage range : 1.65 to 5.5 V
Operating temperature range : –40 to +85°C
• Control inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• Control inputs have hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LV2G53AUSE
SSOP-8 pin
TTP-8DBV
US
E (3,000 pcs/reel)
Rev.4.00, Sep.25.2003, page 1 of 11
HD74LV2G53A
Outline and Article Indication
• HD74LV2G53A
Index band
Lot No.
Y M W
L 5 3
SSOP–8
Marking
Function Table
Control inputs
On channel
INH
A
H
X
None
L
H
Y1
L
L
Y0
H : High level
L : Low level
X : Immaterial
Rev.4.00, Sep.25.2003, page 2 of 11
Y : Year code
(the last digit of year)
M : Month code
W : Week code
HD74LV2G53A
Pin Arrangement
COM
1
INH
2
O
GND
3
O
GND
4
C
C
8
VCC
I
7
Y0
I
6
Y1
5
A
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
–0.5 to 7.0
V
Input voltage range *1
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
Output : H or L
Input clamp current
IIK
–20
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±50
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Output voltage range
Notes:
*1, 2
Test Conditions
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.4.00, Sep.25.2003, page 3 of 11
HD74LV2G53A
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.65
5.5
V
Input voltage range
VI
0
5.5
V
Input / output voltage range
VI/O
0
VCC
V
0
300
ns / V
0
200
VCC = 2.3 to 2.7 V
0
100
VCC = 3.0 to 3.6 V
0
20
VCC = 4.5 to 5.5 V
–40
85
Input transition rise or fall rate ∆t / ∆v
Operating free-air temperature Ta
Note: Unused or floating control inputs must be held high or low.
Rev.4.00, Sep.25.2003, page 4 of 11
°C
Conditions
VCC = 1.65 to 1.95 V
HD74LV2G53A
Electrical Characteristic
Item
Symbol VCC (V) *
Ta = 25°C
Ta = –40 to 85°C
Min Typ Max Min
Input voltage
VIH
VIL
Hysteresis
voltage
VH
On-state switch RON
resistance
Peak on
resistance
Difference of
on- state
resistance
between
switches
RON (P)
∆RON
Typ Max
1.65 to 1.95 —
—
—
VCC×0.75 —
—
2.3 to 2.7
—
—
—
VCC×0.7 —
—
3.0 to 3.6
—
—
—
VCC×0.7 —
—
4.5 to 5.5
—
—
—
VCC×0.7 —
—
1.65 to 1.95 —
—
—
—
—
VCC×0.25
2.3 to 2.7
—
—
—
—
—
VCC×0.3
3.0 to 3.6
—
—
—
—
—
VCC×0.3
VCC×0.3
4.5 to 5.5
—
—
—
—
—
1.8
—
—
—
—
0.25 —
2.5
—
—
—
—
0.30 —
3.3
—
—
—
—
0.35 —
5.0
—
—
—
—
0.45 —
1.65
—
120
360
—
—
450
2.3
—
60
180
—
—
225
3.0
—
50
150
—
—
190
4.5
—
40
75
—
—
100
1.65
—
400
1100 —
—
1400
2.3
—
200
500
—
—
600
3.0
—
90
180
—
—
225
4.5
—
50
100
—
—
125
1.65
—
40
120
—
—
160
2.3
—
20
30
—
—
40
3.0
—
10
20
—
—
30
Unit Test
Conditions
V
Control input only
V
VT+ – VT–
Ω
VIN = VCC or GND
VINH = VIL
IT = 2 mA
Ω
VIN = VCC to GND
VINH = VIL
IT = 2 mA
Ω
VIN = VCC to GND
VINH = VIL
IT = 2 mA
4.5
—
7
15
—
—
20
Off-state switch Is (OFF)
leakage current
5.5
—
—
±0.1 —
—
±1.0
µA
VIN = VCC,
VOUT = GND
or VIN = GND,
VO = VCC, VINH =
VIH
On-state switch Is (ON)
leakage current
5.5
—
—
±0.1 —
—
±1.0
µA
VIN = VCC or GND
VINH = VIL
Input current
IIN
0 to 5.5
—
—
±0.1 —
—
±1.0
µA
VIN = 5.5 V or GND
Quiescent
supply current
ICC
5.5
—
—
—
—
—
10
µA
VIN = VCC or GND
Control input
capacitance
CIC
—
—
3.5
—
—
—
—
pF
Switch terminal CIN / OUT —
capacitance
—
6.0
—
—
—
—
pF
Feed through
capacitance
—
0.5
—
—
—
—
pF
CIN–OUT —
Rev.4.00, Sep.25.2003, page 5 of 11
HD74LV2G53A
Switching Characteristics
• VCC = 1.8 ± 0.15 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
delay time
tPLH
tPHL
—
4.5
13.0
—
19.0
—
11.0
23.0
—
29.0
Enable time
tZH
tZL
—
13.0
30.0
—
35.0
—
18.0
47.0
—
54.0
tHZ
tLZ
—
13.0
25.0
—
30.0
—
20.0
38.0
—
45.0
Disable time
Unit Test
FROM
Conditions (Input)
ns
CL = 15 pF
ns
CL = 15 pF
CL = 50 pF
COM or Yn or
Yn
COM
INH
COM or
Yn
INH
COM or
Yn
CL = 50 pF
ns
CL = 15 pF
TO
(Output)
CL = 50 pF
• VCC = 2.5 ± 0.2 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
delay time
tPLH
tPHL
—
2.5
10.0
—
16.0
—
5.0
12.0
—
18.0
Enable time
tZH
tZL
—
7.0
18.0
—
23.0
—
9.0
28.0
—
35.0
tHZ
tLZ
—
9.0
18.0
—
23.0
—
13.0
28.0
—
35.0
Disable time
Unit Test
FROM
Conditions (Input)
ns
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
COM or Yn or
Yn
COM
INH
COM or
Yn
INH
COM or
Yn
CL = 50 pF
ns
CL = 15 pF
TO
(Output)
CL = 50 pF
• VCC = 3.3 ± 0.3 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
delay time
tPLH
tPHL
—
2.0
6.0
—
10.0
—
4.0
9.0
—
12.0
Enable time
tZH
tZL
—
5.0
12.0
—
15.0
—
7.0
20.0
—
25.0
tHZ
tLZ
—
7.0
12.0
—
15.0
—
10.0
20.0
—
25.0
Disable time
Rev.4.00, Sep.25.2003, page 6 of 11
Unit Test
FROM
Conditions (Input)
ns
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
COM or Yn or
Yn
COM
INH
COM or
Yn
INH
COM or
Yn
CL = 50 pF
ns
CL = 15 pF
CL = 50 pF
TO
(Output)
HD74LV2G53A
Switching Characteristics (cont)
• VCC = 5.0 ± 0.5 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
delay time
tPLH
tPHL
—
1.5
4.0
—
7.0
—
3.0
6.0
—
8.0
Enable time
tZH
tZL
—
4.0
8.0
—
10.0
—
5.0
14.0
—
18.0
tHZ
tLZ
—
5.0
8.0
—
10.0
—
8.0
14.0
—
18.0
Disable time
Unit Test
FROM
Conditions (Input)
ns
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
COM or Yn or
Yn
COM
INH
COM or
Yn
INH
COM or
Yn
CL = 50 pF
ns
CL = 15 pF
TO
(Output)
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
CPD
VCC (V) Ta = 25°C
Min
Typ
Max
3.3
—
7.5
—
5.0
—
8.0
—
Rev.4.00, Sep.25.2003, page 7 of 11
Unit
Test Conditions
pF
f = 10 MHz
HD74LV2G53A
Test Circuit
• R ON
VCC
VINH =VIL
VCC
VIN =VCC
(ON)
VOUT
R ON =
GND
2.0 mA
+
V
VIN–OUT
2 × 10 -3
(Ω)
–
VIN–OUT
• I S (off), I S (on)
VCC
VCC
VINH =VIL
VINH =VIH
VCC
A
VIN =VCC
or GND
VCC
A
(OFF)
GND
Rev.4.00, Sep.25.2003, page 8 of 11
VOUT =GND
or VCC
VIN =VCC
or GND
(ON)
GND
VOUT
OPEN
HD74LV2G53A
• t PLH ,t PHL
VCC
VINH =VIL
tf
tr
VIN
(ON)
VOUT
CL=
15 or 50 pF
GND
VCC
90% 90%
50%
50%
VIN
VCC
10%
10%
t PHL
t PLH
VOUT
50%
GND
VOH
50%
VOL
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. The output are measured one at a time with one transition per measurement.
• t ZH ,t ZL / t HZ ,t LZ
VCC
VINH
S1
VIN
R L=
1kΩ
VCC
VOUT
GND
Item
t ZH
t ZL
t HZ
t LZ
S1
VCC
GND
VCC
GND
CL=15 or
50 pF
S2
GND
VCC
tf
VINH
S2
tr
90%
50%
10%
t ZH
R L=
1kΩ
10%
90%
50%
GND
t HZ
VOH –0.3 V
50%
VOUT
VOH
GND
t ZL
t LZ
50%
VCC
VOL +0.3 V
GND
VCC
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. Waveform – A is for an output with internal conditions such that the output is low
except when disabled by the output control.
3. Waveform – B is for an output with internal conditions such that the output is high
except when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
Rev.4.00, Sep.25.2003, page 9 of 11
VCC
VOL
HD74LV2G53A
• C IN/OUT , C IN–OUT
CIN–OUT
VINH = VIH
VCC
VCC
(OFF)
CIN/OUT
Rev.4.00, Sep.25.2003, page 10 of 11
GND
CIN/OUT
HD74LV2G53A
Package Dimensions
2.0 ± 0.2
1.5 ± 0.2
+ 0.1
(0.17)
8 − 0.2 − 0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.4.00, Sep.25.2003, page 11 of 11
+ 0.1
0.13 − 0.05
0 − 0.1
0.7 ± 0.1 (0.4)
2.3 ± 0.1
(0.5) (0.5) (0.5)
3.1 ± 0.3
(0.4)
Unit: mm
TTP–8DBV


0.010 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0
Similar pages