Revised August 2004 NC7ST04 TinyLogic HST Inverter General Description Features The NC7ST04 is a single high performance CMOS Inverter, with TTL-compatible inputs. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation. ESD protection diodes inherently guard both input and output with respect to the VCC and GND rails. High gain circuitry offers high noise immunity and reduced sensitivity to input edge rate. The TTL-compatible input facilitates TTL to NMOS/CMOS interfacing. Device performance is similar to MM74HCT but with ½ the output current drive of HC/HCT. ■ Space saving SOT23 or SC70 5-lead package ■ Ultra small MicroPak leadless package ■ High Speed; tPD <7 ns typ, VCC = 5V, CL = 15 pF ■ Low Quiescent Power; ICC <1 µA typ, VCC = 5.5V ■ Balanced Output Drive; 2 mA IOL, −2 mA IOH ■ TTL-compatible inputs Ordering Code: Order Package Product Code Number Number Top Mark NC7ST04M5X MA05B 8S04 NC7ST04P5X MAA05A T04 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7ST04L6X MAC06A XX 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel Connection Diagrams Logic Symbol IEEE/IEC Pin Assignments for SC70 and SOT23 Pin Descriptions Pin Names A Y NC Description Input Output (Top View) No Connect Pad Assignments for MicroPak Function Table Y=A Input Output A Y L H H L (Top Thru View) H = HIGH Logic Level L = LOW Logic Level TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. © 2004 Fairchild Semiconductor Corporation DS012185 www.fairchildsemi.com NC7ST04 TinyLogic HST Inverter February 1997 NC7ST04 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage VIN < −0.5V −20 mA Input Voltage (VIN) VIN ≥ VCC + 0.5V +20 mA Output Voltage (VOUT ) DC Input Voltage (VIN) −0.5V to VCC +0.5V 0V–VCC 0V–VCC −40°C to +85°C Operating Temperature (TA) DC Output Diode Current (IOK) Input Rise and Fall Time (tr, tf) VOUT < −0.5V −20 mA VOUT > VCC + 0.5V +20 mA Output Voltage (VOUT ) 4.5V–5.5V VCC = 5.0V 0–500 ns Thermal Resistance (θJA) −0.5V to VCC +0.5V DC Output Source or Sink SOT23-5 300°C/W SC70-5 425°C/W ±12.5 mA Current (IOUT) DC VCC or Ground Current per ±25 mA Supply Pin (ICC or IGND) −65°C to +150°C Storage Temperature (TSTG) 150°C Junction Temperature (TJ) Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside the databook specifications. DC VCC or Ground Current per 260°C (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C SOT23-5 200 mW SC70-5 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol Parameter (V) Min 2.0 VIH HIGH Level Input Voltage 4.5–5.5 VIL LOW Level Input Voltage 4.5–5.5 VOH HIGH Level Output Voltage Typ TA = −40°C to +85°C Max Min Max 2.0 0.8 Units Conditions V 0.8 V IOH = −20 µA, VIN = VIL, 4.5 4.4 4.5 4.4 V 4.5 4.18 4.35 4.13 V IOH = −2 mA V IOL = 20 µA, VIN = V IH, VOL LOW Level Output Voltage IIN Input Leakage Current 5.5 ICC Quiescent Supply Current ICCT ICC per Input www.fairchildsemi.com TA = +25°C VCC 4.5 0 0.1 0.1 4.5 0.10 0.26 0.33 V IOL = 2 mA ±0.1 ±1.0 µA 0 ≤ VIN ≤ 5.5V 5.5 1.0 10.0 µA VIN = VCC or GND 5.5 2.0 2.9 mA Input VIN = 0.5V or 2.4V 2 Symbol tPLH, Parameter Propagation Delay tPHL TA = +25°C VCC (V) Min 5.0 4.5 Output Transition Time tTHL CIN Input Capacitance CPD Power Dissipation Capacitance Max Min Max 3.5 12 6.0 17 6.2 16 20 11.4 27 31 4.3 14 18 11.1 26 30 5.0 4 10 4.5 11 25 31 5.5 10 21 26 Open 2 10 5.0 6 5.5 tTLH, TA = −40°C to +85°C Typ Units Conditions Figure Number ns CL = 15 pF ns CL = 50 pF ns CL = 15 pF ns CL = 50 pF Figures 1, 3 (Note 3) Figure 2 Figures 1, 3 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD) (VCC) (fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz, tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; PRR = Variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7ST04 AC Electrical Characteristics NC7ST04 Tape and Reel Specification TAPE FORMAT for SC70 and SOT23 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 0.138 ± 0.002 0.055 ± 0.004 (3.5 ± 0.05) 4 (1.4 ± 0.11) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) 0.157 0.315 ± 0.012 (4) (8 ± 0.3) TAPE FORMAT for MicroPak Package Designator (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed N W1 W2 W3 REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7ST04 Tape and Reel Specification NC7ST04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7ST04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7ST04 TinyLogic HST Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8