AOD607 Complementary Enhancement Mode Field Effect Transistor General Description Features The AOD607 uses advanced trench technology MOSFETs to provide excellent RDS(ON) and low gate charge. The complementary MOSFETs may be used in H-bridge, Inverters and other applications. n-channel p-channel -30V VDS (V) = 30V -12A (VGS = -10V) ID = 12A (VGS=10V) RDS(ON) RDS(ON) < 25 mΩ (VGS=10V) < 37 mΩ (VGS = -10V) < 34 mΩ (VGS=4.5V) < 62 mΩ (VGS = -4.5V) 100% UIS Tested! -RoHS Compliant -Halogen Free* TO-252-4L D-PAK D1/D2 Top View Bottom View D1/D2 Top View Drain Connected to Tab G1 S2 S1 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Max n-channel Symbol VDS 30 Drain-Source Voltage VGS Gate-Source Voltage ±20 Pulsed Drain Current Avalanche Current TC=100°C C Repetitive avalanche energy L=0.1mH Power Dissipation B Power Dissipation A C TC=25°C TC=100°C TA=25°C TA=70°C Max p-channel -30 Units V ±20 V -12 ID IDM 9.4 -9.4 40 -40 IAR 18 -18 A EAR 40 40 mJ 25 25 12.5 12.5 2.1 2.1 1.3 1.3 -55 to 175 -55 to 175 PD PDSM TJ, TSTG Junction and Storage Temperature Range Thermal Characteristics: n-channel and p-channel Parameter A t ≤ 10s Maximum Junction-to-Ambient A Steady-State Maximum Junction-to-Ambient Steady-State Maximum Junction-to-Case B A t ≤ 10s Maximum Junction-to-Ambient Steady-State Maximum Junction-to-Ambient A Steady-State Maximum Junction-to-Case B Alpha & Omega Semiconductor, Ltd. p-channel 12 TC=25°C C S2 n-channel G1 Continuous Drain G Current G2 S1 G2 Symbol RθJA RθJC RθJA RθJC A W W °C Device n-ch n-ch n-ch Typ 19 47 4.5 Max 23 60 6 °C/W °C/W °C/W p-ch p-ch p-ch 19 47 4.5 23 60 6 °C/W °C/W °C/W www.aosmd.com AOD607 N-Channel Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250µA, VGS=0V IGSS Gate-Body leakage current VDS=0V, VGS= ±20V VGS(th) Gate Threshold Voltage VDS=VGS ID=250µA 1.5 ID(ON) On state drain current VGS=4.5V, VDS=5V 40 TJ=55°C VGS=10V, ID=12A TJ=125°C VGS=4.5V, ID=5A gFS Forward Transconductance VDS=5V, ID=12A VSD Diode Forward Voltage IS=1A,VGS=0V Units V 1 Zero Gate Voltage Drain Current Static Drain-Source On-Resistance Max 30 VDS=24V, VGS=0V IDSS RDS(ON) Typ 5 µA 100 nA 1.7 2.5 V 20 25 28 34 27.5 34 A 25 0.75 mΩ mΩ S 1 V IS Maximum Body-Diode Continuous Current 18 A ISM Pulsed Body-Diode CurrentC 40 A 1250 pF DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance 1040 VGS=0V, VDS=15V, f=1MHz Qgs Gate Source Charge pF 110 VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge 180 VGS=10V, VDS=15V, ID=12A pF 0.7 1.5 Ω 19.8 25 nC 9.8 12.5 nC 2.5 nC Qgd Gate Drain Charge 3.5 nC tD(on) Turn-On DelayTime 4.5 ns tr Turn-On Rise Time 3.9 ns 17.4 ns 3.2 ns VGS=10V, VDS=15V, RL=1.25Ω, RGEN=3Ω tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Body Diode Reverse Recovery Time IF=12A, dI/dt=100A/µs 19 Qrr Body Diode Reverse Recovery Charge IF=12A, dI/dt=100A/µs 8 25 ns nC A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's specific board design, and the maximum temperature of 175°C may be used if the PCB allow s it. B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C: Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. F. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The SOA curve provides a single pulse rating. G. The maximum current rating is limited by bond-wires. *This device is guaranteed green after data code 8X11 (Sep 1ST 2008). Rev3: Oct 2008 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD607 N-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 20 4V 10V 25 20 3.5V 12 ID(A) ID (A) VDS=5V 16 4.5V 15 125°C 8 10 25°C VGS=3V 4 5 0 0 0 1 2 3 4 5 1.5 VDS (Volts) Fig 1: On-Region Characteristics 2.5 3 3.5 4 VGS(Volts) Figure 2: Transfer Characteristics 35 1.6 Normalized On-Resistance VGS=4.5V 30 RDS(ON) (mΩ ) 2 25 20 VGS=10V 15 10 0 5 10 15 VGS=10V ID=12A 1.4 VGS=4.5V 1.2 ID=5A 1 0.8 20 0 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 50 1.0E+01 1.0E+00 1.0E-01 ID=12A IS (A) RDS(ON) (mΩ ) 40 30 125°C 1.0E-02 25°C 125°C 1.0E-03 20 1.0E-04 25°C 1.0E-05 10 0.0 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Alpha & Omega Semiconductor, Ltd. 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics www.aosmd.com AOD607 N-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 1500 10 VDS=15V ID=12A 1250 Ciss Capacitance (pF) VGS (Volts) 8 6 4 1000 750 500 2 250 0 Crss 0 0 4 8 12 16 20 0 Qg (nC) Figure 7: Gate-Charge Characteristics 100.0 5 10 15 20 25 VDS (Volts) Figure 8: Capacitance Characteristics 30 50 ID (Amps) 10.0 1ms 10µs 10ms 0.1s 100µs 1s 1.0 10s TJ(Max)=150°C TA=25°C DC 30 20 10 0.1 0.1 1 TJ(Max)=150°C TA=25°C 40 Power (W) RDS(ON) limited 10 0 0.001 100 VDS (Volts) 10 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Zθ JA Normalized Transient Thermal Resistance Coss In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 Single Pulse 0.001 0.00001 0.0001 PD D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA RθJA=60°C/W 0.01 0.001 0.01 0.1 Ton 1 T 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD607 P-Channel Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=-250µA, VGS=0V -30 VDS=-24V, VGS=0V IDSS Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=±20V VGS(th) Gate Threshold Voltage VDS=VGS ID=-250µA -1.5 ID(ON) On state drain current VGS=-10V, VDS=-5V -40 Static Drain-Source On-Resistance TJ=125°C VGS=-4.5V, ID=-5A gFS Forward Transconductance VDS=-5V, ID=-12A VSD Diode Forward Voltage IS=-1A,VGS=0V IS Maximum Body-Diode Continuous Current ISM Pulsed Body-Diode Current Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance Qg(4.5V) Total Gate Charge (4.5V) Gate Source Charge -1 -5 VGS=-10V, VDS=-15V, ID=-12A µA ±100 nA -2 -2.4 V 30 37 42 50 50 62 A 17 -0.76 mΩ mΩ S -1 V -18 A -40 A 1100 pF 190 pF 122 VGS=0V, VDS=0V, f=1MHz Units V 920 VGS=0V, VDS=-15V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge (10V) Qgs -0.003 C DYNAMIC PARAMETERS Ciss Input Capacitance Coss Max TJ=55°C VGS=-10V, ID=-12A RDS(ON) Typ pF 3.6 5 Ω 18.7 23 nC 9.7 11.7 nC 2.54 nC Qgd Gate Drain Charge 5.4 tD(on) Turn-On DelayTime 9 13 ns tr Turn-On Rise Time 25 35 ns 20 30 ns 12 18 ns 21.4 26 16 ns nC VGS=-10V, VDS=-15V, RL=1.25Ω, RGEN=3Ω tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Body Diode Reverse Recovery Time Qrr Body Diode Reverse Recovery Charge IF=-12A, dI/dt=100A/µs IF=-12A, dI/dt=100A/µs 13 nC A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The Power dissipation PDSM is based on steady-state R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's specific board design, and the maximum temperature fo 175°C may be u sed if the PCB or heatsink allows it. B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. C: Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. F. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The SOA curve provides a single pulse rating. G. The maximum current rating is limited by the package current capability. *This device is guaranteed green after data code 8X11 (Sep 1ST 2008). Rev3: Oct. 2008 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD607 P-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 30 -4.5V -6V -10V 25 20 20 -4V -ID(A) -ID (A) VDS=-5V 25 -5V 15 -3.5V 10 15 10 125°C 5 5 VGS=-3V 25°C 0 0 0 1 2 3 4 5 0 0.5 80 2 2.5 3 3.5 4 4.5 5 1.60 Normalized On-Resistance 70 VGS=-4.5V 60 RDS(ON) (mΩ ) 1.5 -VGS(Volts) Figure 2: Transfer Characteristics -VDS (Volts) Fig 1: On-Region Characteristics 50 40 30 VGS=-10V 20 VGS=-4.5V 1.40 ID=-5A VGS=-10V 1.20 ID=-12A 1.00 0.80 10 0 5 10 15 20 0 25 25 100 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature -ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 1.0E+01 90 1.0E+00 ID=-12A 80 1.0E-01 70 125°C 60 125°C 50 -IS (A) RDS(ON) (mΩ ) 1 1.0E-02 1.0E-03 40 1.0E-04 30 25°C 20 25°C 1.0E-05 10 1.0E-06 0 0.0 3 4 5 6 7 8 9 10 -VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Alpha & Omega Semiconductor, Ltd. 0.2 0.4 0.6 0.8 1.0 -VSD (Volts) Figure 6: Body-Diode Characteristics www.aosmd.com AOD607 P-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 1500 10 VDS=-15V ID=-12A 1250 Ciss Capacitance (pF) -VGS (Volts) 8 6 4 2 1000 750 500 Coss 0 0 0 4 8 12 16 20 0 5 -Qg (nC) Figure 7: Gate-Charge Characteristics 1s 1 20 10 DC 0.1 10 0 0.001 100 -VDS (Volts) D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA RθJA=60°C/W 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 10 30 100µs 10ms 0.1s 0.1 25 30 1ms 10s 20 TJ(Max)=150°C TA=25°C 10µs RDS(ON) limited 1.0 15 40 TJ(Max)=150°C, T A=25°C 10.0 10 -VDS (Volts) Figure 8: Capacitance Characteristics Power (W) -ID (Amps) 100.0 Zθ JA Normalized Transient Thermal Resistance Crss 250 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 PD Ton Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1 T 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD607 N-Channel Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC DUT - Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id Vgs Vgs + Vdd I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vgs Vds - Isd L Vgs Ig Alpha & Omega Semiconductor, Ltd. Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com AOD607 P-Channel Gate Charge Test Circuit & Waveform Vgs Qg -10V - - VDC + VDC Qgs Vds Qgd + DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds toff ton td(on) Vgs - DUT Vgs td(off) tr tf 90% Vdd VDC + Rg Vgs 10% Vds Unclamped Inductive Switching (UIS) Test Circuit & Waveforms 2 L EAR= 1/2 LIAR Vds Vds Id - Vgs Vgs VDC + Rg BVDSS Vdd Id I AR DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vgs Vds - Isd -Isd L Vgs Ig Alpha & Omega Semiconductor, Ltd. + Vdd t rr dI/dt -I RM Vdd VDC - -I F -Vds www.aosmd.com