MCK03 SERIES 3 WATTS DC-DC CONVERTER FEATURES • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 0.5A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 80% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300kHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • OUTPUT 1 / OUTPUT 2 ISOLATION (DS TYPE) • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS SMD TYPE, M1 TYPE DESCRIPTION The MKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 82ºC ambient temperature. MKC03 series have 2:1 wide input voltage of 9~18, 18~36 and 36~75VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load Line regulation 0% LL to HL at Full Load Single No Load to Full Load Dual DS Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 0.2% ± 1% ± 1% ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient 12VDC nominal input 24VDC nominal input 48VDCnominal input Pi type Input surge voltage 12VDC input 24VDC input 48VDC input Start up time Over load protection 180% Maximum case temperature GENERRALINPUT SPECIFICATIONS Efficiency Isolation voltage Isolation resistance Input to Output Input (Output) to Case 500VDC Isolation capacitance Switching frequency Safety approvals See table 500VDC, min. 1minute 500VDC, min. 1minute 9 10 ohms, min. 300pF, max. 300kHz±10% IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Dimensions Weight MTBF (Note 1) Page 1 of 3 DIP SMD MIL-HDBK-217F Epoxy (UL94 V-0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 16g (0.55oz) 18g (0.62oz) 7.213 x 106 hrs Power up 350ms,max. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Continuous, automatics recovery 20mAp-p Nominal Vin and constant resistive load 200µs % of FL at nominal input 36VDC 100ms,max. 50VDC 100ms,max. 100VDC 100ms,max. Input reflected ripple current Transient response recovery time 25% load step change Short circuit protection 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Input filter ± 0.2% Load regulation Ripple and noise Input voltage range Standard M1 (Note 5) -25ºC ~ +85ºC (with derating) -40ºC ~ +85ºC (non-derating) 100ºC Storage temperature range Thermal impedance -55ºC ~ +125ºC Nature convection 20ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 ESD EN61000-4-2 Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com Class A Air Contact ± 8kV Perf. Criteria A ± 6kV 2014/4/30 MCK03 SERIES 3 WATTS Output Current Min. load Full load DC-DC CONVERTER (3) (2) (3) (4) No load Input Current Eff (%) Capacitor Load max 50mVp-p 8mA 74 2200µF 50mVp-p 10mA 77 1000µF 250mA 50mVp-p 13mA 79 220µF 200mA 50mVp-p 13mA 80 150µF 0mA ± 250mA 50mVp-p 13mA 75 ± 470µF ± 12 VDC 0mA ± 125mA 50mVp-p 16mA 80 ± 100µF ± 15 VDC 0mA ± 100mA 50mVp-p 16mA 80 ± 68µF V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 18mA 75 V1:470µF;V2:470µF MKC03-12DS12 9 ~ 18 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 80 V1:100µF;V2:100µF MKC03-12DS15 9 ~ 18 VDC V1:15 VDC;V2:15 VDC V1:68µF;V2:68µF Model Number Input Range Output Voltage MKC03-12S33 9 ~ 18 VDC 3.3 VDC 0mA 500mA MKC03-12S05 9 ~ 18 VDC 5 VDC 0mA 500mA MKC03-12S12 9 ~ 18 VDC 12 VDC 0mA MKC03-12S15 9 ~ 18 VDC 15 VDC 0mA MKC03-12D05 9 ~ 18 VDC ± 5 VDC MKC03-12D12 9 ~ 18 VDC MKC03-12D15 9 ~ 18 VDC MKC03-12DS05 9 ~ 18 VDC Output Ripple & Noise 0mA V1:100mA;V2:100mA 50mVp-p 18mA 80 MKC03-24S33 18 ~ 36 VDC 3.3 VDC 0mA 500mA 50mVp-p 12mA 72 2200µF MKC03-24S05 18 ~ 36 VDC 5 VDC 0mA 500mA 50mVp-p 12mA 74 1000µF MKC03-24S12 18 ~ 36 VDC 12 VDC 0mA 250mA 50mVp-p 16mA 78 220µF MKC03-24S15 18 ~ 36 VDC 15 VDC 0mA 200mA 50mVp-p 16mA 78 150µF MKC03-24D05 18 ~ 36 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 18mA 75 ± 470µF MKC03-24D12 18 ~ 36 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 18mA 78 ± 100µF MKC03-24D15 18 ~ 36 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 18mA 78 ± 68µF MKC03-24DS05 18 ~ 36 VDC V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 16mA 75 V1:470µF;V2:470µF MKC03-24DS12 18 ~ 36 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 20mA 78 V1:100µF;V2:100µF MKC03-24DS15 18 ~ 36 VDC V1:15 VDC;V2:15 VDC 0mA V1:100mA;V2:100mA 50mVp-p 20mA 78 V1:68µF;V2:68µF 0mA 500mA 50mVp-p 8mA 76 2200µF 1000µF MKC03-48S33 36 ~ 75 VDC 3.3 VDC MKC03-48S05 36 ~ 75 VDC 5 VDC 0mA 500mA 50mVp-p 10mA 74 MKC03-48S12 36 ~ 75 VDC 12 VDC 0mA 250mA 50mVp-p 10mA 79 220µF MKC03-48S15 36 ~ 75 VDC 15 VDC 0mA 200mA 50mVp-p 10mA 79 150µF MKC03-48D05 36 ~ 75 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 10mA 74 ± 470µF MKC03-48D12 36 ~ 75 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 12mA 77 ± 100µF MKC03-48D15 36 ~ 75 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 12mA 77 ± 68µF MKC03-48DS05 36 ~ 75 VDC V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 18mA 74 V1:470µF;V2:470µF MKC03-48DS12 36 ~ 75 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 77 V1:100µF;V2:100µF MKC03-48DS15 36 ~ 75 VDC V1:15 VDC;V2:15 VDC 0mA V1:100mA;V2:100mA 50mVp-p 18mA 77 V1:68µF;V2:68µF Note 1. 2. 3. 4. 5. 6. MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input and no load. Typical value at nominal input and full load. Test by minimum input and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. Page 2 of 3 www.pduke.com 2014/4/30 MCK03 SERIES 3 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION PIN 1 2 3 10 11 12 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT Page 3 of 3 DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT PIN 24 23 22 15 14 13 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT SMD PIN CONNECTION DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT PIN 1 2 3 10 11 12 Others SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT NC www.pduke.com DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT NC DS PIN SINGLE +INPUT 24 +INPUT - V1 out 23 NC + V1 out 22 NC - V2 out 15 -OUTPUT + V2 out 14 +OUTPUT -INPUT 13 -INPUT NC DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT 2014/4/30