ON NRVB5H100MFST1G Switchmode power rectifier Datasheet

MBR5H100MFS,
NRVB5H100MFS
SWITCHMODE
Power Rectifiers
These state−of−the−art devices have the following features:
Features
• Low Power Loss / High Efficiency
• New Package Provides Capability of Inspection and Probe After
•
•
•
•
•
Board Mounting
Guardring for Stress Protection
Low Forward Voltage Drop
175°C Operating Junction Temperature
NRVB Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These are Pb−Free Devices
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIERS
5 AMPERES
100 VOLTS
5,6
1,2,3
MARKING
DIAGRAM
Mechanical Characteristics:
•
•
•
•
•
Case: Epoxy, Molded
Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in.
Lead Finish: 100% Matte Sn (Tin)
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
100
Average Rectified Forward Current
(Rated VR, TC = 150°C)
IF(AV)
5
A
Peak Repetitive Forward Current,
(Rated VR, Square Wave,
20 kHz, TC = 150°C)
IFRM
10
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM
200
A
Storage Temperature Range
Tstg
−65 to +175
°C
Operating Junction Temperature
TJ
−55 to +175
°C
Voltage Rate of Change
(Rated VR)
dv/dt
10,000
V/ms
Unclamped Inductive Switching
Energy (10 mH Inductor,
Non−repetitive)
EAS
100
mJ
A
A
1
SO−8 FLAT LEAD
CASE 488AA
STYLE 2
B5H100
A
Y
W
ZZ
A
C
B5H100
AYWZZ
C
Not Used
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Lot Traceability
V
ESD Rating (Human Body Model)
3B
ESD Rating (Machine Model)
C
ORDERING INFORMATION
Device
Package
Shipping†
MBR5H100MFST1G
SO−8 FL
(Pb−Free)
1500 /
Tape & Reel
MBR5H100MFST3G
SO−8 FL
(Pb−Free)
5000 /
Tape & Reel
NRVB5H100MFST1G
SO−8 FL
(Pb−Free)
1500 /
Tape & Reel
NRVB5H100MFST3G
SO−8 FL
(Pb−Free)
5000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2012
May, 2012 − Rev. 4
1
Publication Order Number:
MBR5H100MFS/D
MBR5H100MFS, NRVB5H100MFS
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Case, Steady State
(Assumes 600 mm2 1 oz. copper bond pad, on a FR4 board)
Symbol
Typ
Max
Unit
RθJC
−
2.4
°C/W
0.56
0.6
0.6
0.73
3
0.003
13
0.1
ELECTRICAL CHARACTERISTICS
Instantaneous Forward Voltage (Note 1)
(iF = 5 Amps, TJ = 125°C)
(iF = 5 Amps, TJ = 25°C)
vF
Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, TJ = 125°C)
(Rated dc Voltage, TJ = 25°C)
iR
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
V
mA
MBR5H100MFS, NRVB5H100MFS
TYPICAL CHARACTERISTICS
25°C
IF, INSTANTANEOUS FORWARD
CURRENT (A)
−40°C
125°C
10
1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
125°C
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8 2.0
Figure 1. Typical Instantaneous Forward
Characteristics
Figure 2. Maximum Instantaneous Forward
Characteristics
1.E+00
175°C
150°C
125°C
1.E−03
1.E−04
1.E−01
175°C
1.E−02
150°C
125°C
1.E−03
1.E−05
1.E−04
1.E−06
25°C
25°C
1.E−05
1.E−07
−40°C
1.E−06
1.E−08
−40°C
1.E−09
0
10
20
1.E−07
30
40
50
60
70
90 100
80
1.E−08
0
10
20
30
40
50
60
80
70
90 100
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Figure 3. Typical Reverse Current
Characteristics
Figure 4. Maximum Reverse Current
Characteristics
10,000
CJ, JUNCTION CAPACITANCE (pF)
25°C
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
1.E−02
1000
100
0
1
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
1.E−01
10
−40°C
10
0.1
2.0
1.E+00
1.E−10
175°C
IR, INSTANTANEOUS REVERSE CURRENT (A)
0
IR, INSTANTANEOUS REVERSE CURRENT (A)
0.1
MAXIMUM FORWARD SURGE CURRENT (A)
IF, INSTANTANEOUS FORWARD
CURRENT (A)
175°C
150°C
10
20
30
40
50
60
70
80
90
100
300
Single pulse non−repetitive square
wave 25°C ambient
Mounted on a minimum pad, FR4
board, 1 oz. copper pour
280
260
240
220
200
180
160
140
0
1.0
2.0
3.0
4.0
VR, REVERSE VOLTAGE (V)
PULSE DURATION (ms)
Figure 5. Typical Junction Capacitance
Figure 6. Forward Surge Safe Operating Area
http://onsemi.com
3
MBR5H100MFS, NRVB5H100MFS
9
IF, AVERAGE RECTIFIED FORWARD
CURRENT (A)
IF, AVERAGE RECTIFIED FORWARD
CURRENT (A)
TYPICAL CHARACTERISTICS
8
7
DC
Square
Wave
6
5
4
3
2
RqJC = 1°C/W
1
0
150
155
160
165
170
175
5
DC
4
Square
Wave
3
2
RqJA = 49°C/W
1
0
0
20
40
80
60
100
120
140
160 180
TC, CASE TEMPERATURE (°C)
TA, AMBIENT TEMPERATURE (°C)
Figure 7. Forward Current Derating Over Case
Temperature
Figure 8. Forward Current Derating Over
Ambient Temperature
140
3
TJ = 175°C
Assumes 25°C
Ambient Temperature
120
100
2
qJA (°C/W)
PD, AVERAGE FORWARD POWER
DISSIPATION (W)
6
Square
Wave
DC
1
80
1 oz. Copper PCB
60
2 oz. Copper PCB
40
20
0
0
1
2
3
4
0
5
0
IF, AVERAGE RECTIFIED FORWARD CURRENT (A)
100
200
300
400
500
COPPER HEAT SPREADER AREA
Figure 9. Maximum Forward Power
Dissipation
600
700
(mm2)
Figure 10. Steady State Junction to Ambient
Thermal Resistance
10
Assumes 25°C ambient and soldered
to a 600 mm2 − 1 oz copper pad on PCB
R(t) (°C/W)
50% Duty Cycle
1
20%
10%
5%
0.1
2%
1%
0.01
Single Pulse
0.000001 0.00001
0.0001
0.001
0.1
0.01
1
PULSE TIME (sec)
Figure 11. Transient Thermal Response, Junction to Case
http://onsemi.com
4
10
100
1000
MBR5H100MFS, NRVB5H100MFS
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE G
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
0.20 C
D
2
A
B
D1
2X
0.20 C
4X
E1
2
3
q
E
2
1
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
e
G
K
L
L1
M
q
c
A1
4
TOP VIEW
C
3X
e
0.10 C
SEATING
PLANE
DETAIL A
A
STYLE 2:
PIN 1. ANODE
2. ANODE
3. ANODE
4. NO CONNECT
5. CATHODE
0.10 C
SIDE VIEW
8X
DETAIL A
SOLDERING FOOTPRINT*
b
0.10
C A B
0.05
c
3X
0.750
4
K
0.965
1.330
E2
L1
M
2X
0.905
2X
0.495
4.530
3.200
G
4X
1.000
e/2
1
PIN 5
(EXPOSED PAD)
4X
1.270
L
MILLIMETERS
MIN
NOM
MAX
0.90
1.00
1.10
0.00
−−−
0.05
0.33
0.41
0.51
0.23
0.28
0.33
5.15 BSC
4.50
4.90
5.10
3.50
−−−
4.22
6.15 BSC
5.50
5.80
6.10
3.45
−−−
4.30
1.27 BSC
0.51
0.61
0.71
1.20
1.35
1.50
0.51
0.61
0.71
0.05
0.17
0.20
3.00
3.40
3.80
0_
−−−
12 _
0.475
D2
BOTTOM VIEW
2X
1.530
4.560
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR5H100MFS/D
Similar pages