DATA SHEET PHOTO DIODE NDL5481P Series 1 300 nm OPTICAL ANALOG CATV SYSTEM φ 80 µ m InGaAs PIN PHOTO DIODE MODULE WITH SMF DESCRIPTION NDL5481P Series is InGaAs PIN photo diode modules with singlemode fiber. They are designed for analog transmission systems like CATV applications, and feature low intermodulation distortion and 40 dB minimum of optical return loss. FEATURES • Low intermodulation distortion IMD2 = −75 dBc MAX. • Small capacitance Ct = 0.7 pF IMD3 = −90 dBc MAX. • Low operating voltage VR = 10 V • Optical return loss 45 dB • Detecting area size φ 8 0 µm • High quantum efficiency η = 81 % @ λ = 1 300 nm • Coaxial module with singlemode fiber (SM-9/125) • Small dark current ID = 0.1 nA • NDL5481P1 and NDL5481P2 have a flange. • PACKAGE DIMENSIONS in millimeters NDL5481P1 Optical Fiber: SM-9/125 Length: 1 m MIN. Shrunk tube φ 2.0 30.0 MAX. 30.0 MAX. 1 φ 6.0 +0.0 –0.1 12.5 MIN. 12.5 MIN. 3.9±0.5 2 3 φ2.5 2–φ2.5 2 4.0±0.3 1 2–φ2.2 7.0±0.3 1.5 2 3 3.0±0.3 φ 0.45 12.5 MIN. 4.0±0.1 φ 6.0 +0.0 –0.1 6.9±0.3 φ 6.0+0.0 –0.1 6.0+0.0 –0.1 φ2.5 14.0±0.1 30.0 MAX. φ 2.5 Shrunk tube 2.5±0.1 0.5±0.1 Shrunk tube 6.9±0.3 NDL5481P2 Optical Fiber: SM-9/125 Length: 1 m MIN. φ 2.0 1 φ 2.0 18.0±0.1 12.0±0.1 LEAD CONNECTION 1 Anode (Negative) 2 Cathode (Positive) 3 Case 3 7.0±0.15 NDL5481P Optical Fiber: SM-9/125 Length: 1 m MIN. 16.0±0.2 3 2 1 The information in this document is subject to change without notice. Document No. P10311EJ3V0DS00 (3rd edition) Date Published March 1996 P Printed in Japan The mark • shows major revised points. © 1994 NDL5481P Series • ORDERING INFORMATION Part Number Available Connector NDL5481P Without Connector no flange NDL5481PC With FC-UPC Connector NDL5481PD With SC-UPC Connector NDL5481P1 Without Connector NDL5481P1C With FC-UPC Connector NDL5481P1D With SC-UPC Connector NDL5481P2 Without Connector NDL5481P2C With FC-UPC Connector NDL5481P2D With SC-UPC Connector flat mount flange vertical flange ABSOLUTE MAXIMUM RATINGS (TC = 25 °C) Parameter Symbol Ratings Unit Reverse Voltage VR 20 V Forward Current IF 10 mA Optical Input Power Pin 8 mW Operating Case Temperature TC −40 to +85 °C Storage Temperature Tstg −40 to +85 °C ELECTRO-OPTICAL CHARACTERISTICS (TC = 25 °C) Parameter Symbol Conditions TYP. MAX. Unit Dark Current ID VR = 10 V 0.1 1.0 nA Terminal Capacitance Ct VR = 10 V, f = 1.0 MHz 0.7 1.0 pF Quantum Efficiency η λ = 1 300 nm 76 81 % Responsivity S λ = 1 300 nm 0.8 0.85 A/W Cut-off Frequency fC VR = 10 V, λ = 1 300 nm, RL = 50 Ω 2.5 ORL λ = 1 300 nm 40 2 order IMD2 λ = 1 300 nm, 2 Laser 2 Tone Test, VR = 10 V, OMI = 50 %/LD, −75 dBc 3 order IMD3 Pin = 0.5 mW, f1 = 187.25 MHz, −90 dBc Optical Return Loss Intermodulation Distortion f2 = 193.25 MHz 2 MIN. GHz 45 dB NDL5481P Series • WAVELENGTH DEPENDENCE OF QUANTUM EFFICIENCY Quantum Efficiency η (%) 100 80 60 40 20 0 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Wavelength λ ( µ m) 1.6 1.7 Responsivity (Relative Value) ∆ S/S (%) TYPICAL CHARACTERISTICS REVERSE VOLTAGE DEPENDENCE OF DARK CURRENT Dark Current ID (nA) 1.0 TC = 75 ˚C λ = 1 300 nm 0 –10 –60 40 60 80 –40 –20 0 20 Operating Case Temperature TC (˚C) 100 TEMPERATURE DEPENDENCE OF DARK CURRENT 1 VR = 10 V 0 10 –1 10 –2 10 10 –3 –60 –40 –20 0 60 80 20 40 Operating Case Temperature TC (˚C) 100 25 ˚C 0.1 Terminal Capacitance Ct (pF) Dark Current ID (nA) 50 ˚C 0 ˚C 0.01 –25 ˚C 0.001 10 10 10 TEMPERATURE DEPENDENCE OF RESPONSIVITY 0 10 Reverse Voltage VR (V) 20 5 REVERSE VOLTAGE DEPENDENCE OF TERMINAL CAPACITANCE f = 1.0 MHz 1 0.5 0.01 0.1 1 10 Reverse Voltage VR (V) 100 3 NDL5481P Series MODULATION INDEX vs. IMD2 FREQUENCY RESPONSE 0 –20 IMD2 (dBc) Response (3dB/div.) VR = 10 V λ = 1 300 nm RL = 50 Ω 2.5 5.0 Frequency f (GHz) OPTICAL INPUT POWER vs. IMD2 0 –20 IMD2 (dBc) –40 Pin +6 dBm –60 +3 dBm 0 dBm –80 0 2 LD, 2 Tone Test f = 187.25 MHz, 193.25 MHz VR = 10 V, λ = 1 300 nm –40 OMI 90% 70% 50% –60 –80 –100 –4 4 2 LD, 2 Tone Test f = 187.25 MHz, 193.25 MHz VR = 10 V, λ = 1 300 nm –2 0 4 6 2 Optical Input Power Pin (dBm) 8 –100 40 –3 dBm 50 60 80 70 Modulation Index (%) 90 100 NDL5481P Series • HANDLING PRECAUTION for PD/APD MODULE The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling precautions. 1. Do not make the fiber bend radius less than 30 mm (*3). 2. Do not bend the fiber within the 18 mm section from the module body (*4). 3. Do not stress the ferrule with a lateral force exceeding 500 g (*5). 30 m m fiber in m ) (*3 ferrule (*5) 18 mm min (*4) (*1) (*2) module body 5 NDL5481P Series • InGaAs APD/PD FAMILY Features Packages TO-18 type Can APD φ30 µ m φ50 µ m (for 2.5 Gb/s) (for 2.5 Gb/s) NDL5530 PIN-PD φ50 µ m φ50 µ m φ80 µ m φ80 µ m Remarks (for 2.5 Gb/s) NDL5500 NDL5510 3 pins *3,4 NDL5490L TO-18 type Can NDL5405L 3 pins with Micro Lens Small Can *3,4 NDL5490 NDL5531 φ5.6 µ m Chip on Carrier NDL5530C NDL5520C NDL5500C NDL5510C Receptacle Module NDL5471RC 3 pins NDL5471RD RC: FC receptacle RD: SC receptacle *2 Coaxial Module with NDL5521P NDL5551P NDL5561P MMF NDL5521P1 NDL5551P1 NDL5561P1 NDL5521P2 NDL5551P2 NDL5561P2 NDL5553P NDL5461P P1, P2: With flange *2 NDL5461P1 *2 NDL5461P2 *1 *1 NDL5553P1 *1 NDL5553P2 NDL5553PS Coaxial Module with SMF *1 NDL5481P *5 NDL5553P1S *1 NDL5481P1 NDL5553P2S *1 *5 NDL5481P2 *5 14-pin DIP Module NDL5506P ∆T = 45 K (@ Ic = 1.1 A) with TEC NDL5506PS PS: With SMF 6-pin BFY Module NDL5522P NDL5422P with MMF *1 For OTDR *2 With GI-62.5/125 *3 Under development *4 Internal pre-amplifier for 1Gb/s *5 For analog application (optical CATV) Remark Modules are available with FC-PC connector or optional SC-PC connector. 6 With Pre-AMP NDL5481P Series REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system IEI-1205 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Semiconductor device package manual IEI-1213 Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E 7 NDL5481P Series CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstance break the hermetic seal. The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94. 11