PRODUCT DATASHEET HighBay series last update 31/5/2017 DETAILS Product Number CS14839_HB-2X2MX-WWW Family HighBay Type Assembly Color clear Diameter 90x90 mm Height 16,38 mm Style square Optic Material Holder Material Fastening Status production ready ROHS Compliant Yes Date Updated 31/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency SMD 5050 sim: 78 WWW-class sim: 94 % sim: 0.580 - PSL440 73 deg WWW-class 92 % 0.614 - PSL445 73 deg WWW-class 94 % 0.580 - XHP70 77 deg WWW-class 93 % 0.550 - XHP35 HD 76 deg WWW-class 93 % 0.530 - XHP35 HI 73 deg WWW-class 93 % 0.560 - XHP50 73 deg WWW-class 93 % 0.570 - XHP50.2 sim: 87 WWW-class sim: 94 % sim: 0.460 - H70E0 77 deg WWW-class 93 % 0.530 - LUXEON M/MX 78 deg WWW-class 93 % 0.560 - LUXEON MZ 71 deg WWW-class 75 % 0.520 - LUXEON XR-M square 2x2 78 deg WWW-class 94 % 0.570 - NFMW48xA sim: 77 WWW-class sim: 93 % sim: 0.580 - OSCONIQ P 7070 sim: 78 WWW-class sim: 92 % sim: 0.572 - Duris S10 66 deg WWW-class 94 % cd/lm 0.700 Connector - January 24th 2018 2:19 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G 67 16.38 Connector pocket (4 3. X) 90 45 2 2 3 3 40 (incompressible seal) H 17 4 4 rew 7.5 poc ket 4X) 90 82 (Sc LED position 40 2 2 82 INDEX PART NO DESCRIPTION MATERIAL COLOUR 1 2 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Isometric view (1:1) H G C14631 C14832 STRADA-2X2MX-SEAL HB-2X2MX-WWW silicone PMMA Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE CS14839_HB-2X2MX-WWW SIZE A3 SCALE 1 PART NUMBER CS14839 1:1 WEIGHT 46.9 g B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.