HMC158C8 v03.1105 FREQUENCY MULTIPLIERS - SMT 6 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Typical Applications Features The HMC158C8 is suitable for: Conversion Loss: 15 dB • Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 40 dB • LMDS, VSAT, and Point-to-Point Radios Input Drive Level: 10 to 20 dBm • UNII & HiperLAN • Test Equipment Functional Diagram General Description The HMC158C8 is a miniature frequency doubler MMIC in a non-hermetic ceramic surface mount nonhermetic package. Suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal level. The doubler uses the same diode/balun technology used in Hittite MMIC mixers, features small size and requires no DC bias. Electrical Specifications, TA = +25° C, As a Function of Drive Level Input = +10 dBm Parameter Typ. Input = +15 dBm Max. Min. Typ. Input = +20 dBm Max. Min. Typ. Max. Units Frequency Range, Input 1.7 - 4.0 1.7 - 3.5 1.3 - 4.0 GHz Frequency Range, Output 3.4 - 8.0 3.4 - 7.0 2.6 - 8.0 GHz Conversion Loss 6-6 Min. 18 22 15 18 15 18 dB FO Isolation (with respect to input level) 37 45 dB 3FO Isolation (with respect to input level) 40 50 dB 4FO Isolation (with respect to input level) 32 40 dB For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC158C8 v03.1105 Conversion Gain vs. Drive Level GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Isolation @ +15 dBm Drive Level* *With respect to input level Input Return Loss vs. Drive Level Output Return Loss vs. Drive Level For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com FREQUENCY MULTIPLIERS - SMT CONVERSION GAIN (dB) 6 6-7 HMC158C8 v03.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Absolute Maximum Ratings FREQUENCY MULTIPLIERS - SMT 6 Input Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB PF GROUND. 6-8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC158C8 v03.1105 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.3 - 4.0 GHz INPUT Evaluation PCB FREQUENCY MULTIPLIERS - SMT 6 List of Materials for Evaluation PCB 107196 [1] Item Description J1, J2 PCB Mount SMA Connector U1 HMC158C8, Doubler PCB [2] 107165 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6-9