Part Number: www.SunLED.com EUY28D 10mmx22mm LIGHT BAR Features z UNIFORM LIGHT EMITTING AREA. z EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY STANDARD SOCKETS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z MECHANICALLY RUGGED. z I.C. COMPATIBLE. z BOTTOM SURFACE OF EPOXY IS NOT FLAT. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UY Unit (GaAsP/GaP) UY (GaAsP/GaP) Unit Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Voltage VR 5 V Forward Current IF 30 mA Reverse Current (Max.) (VR=5V) IR 10 uA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA λP 590 nm Power Dissipation PT 75 Wavelength Of Peak Emission (Typ.) (IF=10mA) Operating Temperature TA -40 ~ +85 λD 588 nm Tstg -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=10mA) Storage Temperature mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Part Number EUY28D Emitting Color Yellow Published Date : MAR.20,.2008 Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) mcd Lens-color min. typ. 5 9 Yellow Diffused Drawing No : SDSA3904 V3 Wavelength nm λP Viewing Angle 2 θ 1/2 590 120° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com EUY28D 10mmx22mm LIGHT BAR UY Published Date : MAR.20,.2008 Drawing No : SDSA3904 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com EUY28D 10mmx22mm LIGHT BAR Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR.20,.2008 Drawing No : SDSA3904 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 10mmx22mm LIGHT BAR PACKING & LABEL SPECIFICATIONS Published Date : MAR.20,.2008 EUY28D Drawing No : SDSA3904 EUY28D V3 Checked : B.L.LIU P.4/4