Axial Lead and Cartridge Fuses Designed to IEC Standard 5 x 20 mm Time Lag Fuse (Slo-Blo ® Fuse) 215 Series ® ® • Designed to International (IEC) Standards for use globally. • Meets the IEC 60127-2, Sheet 5 specification for Time Lag Fuses. • Available in Cartridge and Axial Lead Form. • Available in ratings of .2 to 12 amperes. • High breaking capacity. ELECTRICAL CHARACTERISTICS: 150% Ampere Rating .1-6.3 8-12 Opening Time 60 minutes, Minimum 30 minutes, Minimum .1-12 30 minutes, Maximum 210% 275% 400% 1000% .1-.8 1-12 .1-.8 1– 3.15 4– 6.3 .1-.8 1-12 .25 sec., Min.; 80 sec. Max. .75 sec., Min.; 80 sec. Max. .05 sec., Min.; 5 sec. Max. .095 sec., Min.; 5 sec. Max. .150 sec., Min.; 5 sec. Max. .005 sec., Min.; .15 sec., Max. .010 sec., Min.; .15 sec., Max. 1500 amperes @ 250VAC, 0.7-0.8 power factor. ORDERING INFORMATION: Ampere Rating .200* .250* .315* .400* .500* .630* .800* 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8* 10* 12* cycles –65°C to +125°C) Vibration: MIL-STD-202F Method 201A Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative humidity (95%) and elevated temperature (40°C) for 240 hours. Salt Spray: MIL-STD-202F Method 101D, Test Condition B PHYSICAL SPECIFICATIONS: Material: Body: Ceramic INTERRUPTING RATING: Cartridge Catalog Number 215 .200 215 .250 215 .315 215 .400 215 .500 215 .630 215 .800 215 001. 215 1.25 215 01.6 215 002. 215 02.5 215 3.15 215 004. 215 005. 215 06.3 215 008. 215 010. 215 012. ENVIRONMENTAL SPECIFICATIONS: Operating temperature: -55˚C to 125˚C Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5 Voltage Rating 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Nominal Resistance Cold Ohms 1.840 1.240 0.880 0.583 1.168 0.720 0.468 0.111 0.081 0.056 0.041 0.031 0.022 0.019 0.015 0.011 0.009 0.007 0.006 Nominal Melting I2t A2 Sec. 0.341 0.545 0.974 1.324 0.424 0.633 0.974 1.022 1.996 3.798 6.768 10.370 20.644 37.684 80.675 129.022 204.001 351.037 515.500 Cap: Nickel Plated Brass Leads: Tin Plated Copper Filler: Sand (500mA – 12A) Terminal Strength: MIL-STD-202F Method 211A, Test Condition A Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A 11 Product Marking: Cap 1: current and voltage rating. Cap 2: Agency approval markings. Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel). w w w. l i t t e l f u s e . c o m AXIAL LEAD AND CARTRIDGE FUSES % of Ampere Rating 11 425 Axial Lead and Cartridge Fuses Designed to IEC Standard 5 x 20 mm Time Lag Fuse (Slo-Blo ) Fuse 215 Series ® ® ® Agency Approvals Agency Approvals Certificate No. Certificate No. Certificate No. Cartridge NBK250702-E10480 NBK250702-E10480 Leaded NBK250702-E10480 NBK250702-E10480 2002010207007593 SU05001-2011 SU05001-2012 Pending Ampere Range 20+0.5 0215 000 5.2+0.1 -0.2 A & C 1A – 5A E 6.3A – 12A 5.1+0.6 B & D 1A – 5A F 6.3A -12A 5.1+0.6 1A – 6.3A 1A – 3.15A 4A – 10A 12A 40 0215.200 XE to 0215.800 XE 22.5 MAX 6.0 MAX 0.65 Recognised File No. E10480 Guide No. JDYX2 ® 50mA – 12A File No. Acc. Class No. 029862 LR1422-30 Licence No. KM41462 200mA – 6.3A File No. 403906, 0212085, 0147100 200mA – 10A 40 0215001.XE to 0215012.XE 22.5 MAX 5.8 MAX 0.65* All dimensions in mm 200mA – 12A Notes: * Ratings above 6.3A have 0.8 mm dia lead Average Time Current Curves 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A ® 0.1 1 CURRENT IN AMPERES 426 w w w. l i t t e l f u s e . c o m 10 100