HTE Series High Voltage / Thick Film Resistors • • • • • • • Resistances from 1kOhms to 100MOhms Power Rating 0.7 to 15Watts Resistance Tolerances to ±1% Low TCR: ± 100ppm/°C Standard Voltage Ratings to 48KV Non-Inductive Design SMD upon request SPECIFICATIONS Type Wattage Rating ( Watts ) Resistance Range (Ohm) Dimensions (special dimensions possible) A B C ±0.062” [±1.6mm] ±0.031” [±0.8mm] ±0.002” [±0.05mm] Maximum Working Voltage (KV ACrms)) HTE15 0.7 1K - 100M 0.590 [15.0] 0.197 [5.0] 0.032 [0.8] 2.5 HTE19 1 1K - 100M 0.748 [19.0] 0.197 [5.0] 0.032 [0.8] 3.5 HTE24 2 1K - 100M 0.944 [24.0] 0.314 [8.0] 0.040 [1.0] 5.5 HTE25 1.2 1K - 100M 1.00 [25.4] 0.197 [5.0] 0.032 [0.8] 5.5 HTE39 3 1K - 100M 1.535 [39.0] 0.314 [8.0] 0.040 [1.0] 10 HTE52 5 1K - 100M 2.05 [52.0] 0.314 [8.0] 0.040 [1.0] 15 HTE76 7.5 2K - 100M 2.99 [76.0] 0.354 [9.0] 0.040 [1.0] 22.5 HTE102 10 2K - 100M 4.02 [102] 0.354 [9.0] 0.040 [1.0] 32 HTE127 12 2K - 100M 5.00 [127] 0.354 [9.0] 0.040 [1.0] 40 HTE152 15 2K - 100M 5.98 [152] 0.354 [9.0] 0.040 [1.0] 48 Ordering Information Part Type - Resistance - Tolerance - TCR ( If not standard ) Example: HTE39 10MOhm 1% Riedon Inc. 07/15 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page 52 HTE Series High Voltage / Thick Film Resistors SPECIFICATIONS (continued) Specification Value Resistance Range 1kOhms to 100MOhms Tolerances ±1% to ±10% Temperature Coefficient ±100ppm/°C : -25°C to +125°C ( Standard ) ±20 to ±150 ppm/K ( On Request ) Temperature Range -55°C to +195°C Insulation Resistance >10000 MOhms Encapsulation Epoxy Conformal Coating / silicon or glass upon request Environmental Performance ∆R (MIL-STD 202) Load Life ±0.7% Moisture Resistance ±0.4% Thermal Shock ±0.25% 5X Overload ( 5s ) ±0.5% Power Derating Curve 120 Power ( % ) 100 80 60 40 20 0 0 50 100 150 200 250 300 Ambient Temperature (°C) Riedon Inc. 07/15 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page 53