DOG2 MEMS SERIES CAN J1939 INCLINOMETER SPECIFICATIONS FEATURES 8 – 30 VDC supply voltage Digital signal processing includes o filter (e.g. vibration damping) o temperature compensation 12 bit resolution 100 Hz refresh rate -40 °C – 85 °C temperature range Accuracy typically o 0.5° | -40 °C – 85 °C o 0.15° | 25 °C APPLICATIONS Mobile and stationary cranes Lift platforms Building control Weighing systems Truck chassis leveling Vehicle applications Road construction machines Dual axis inclinometer Measurement ranges ±90° CAN J1939 interface The DOG2 MEMS-Series inclinometer dual axis is mainly developed with focus on platform leveling, dynamic engine management, tip-over protection and tilt alarm. A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows using the sensor in many noisy environments (e.g. vibrations). The inclinometer includes a powerful digital signal processing that offers various filteralgorithms and allows customer specific OEM solutions. It is possible to adjust the sensor to different environments yielding an optimized performance. Customization can also be made in terms of angular range and connectivity, i.e. cable and connector. The PA6.6 housing is very compact in size and has compression limiter bushings for safe installation of the sensor. It is compatible with oil, grease and fuel also. Therefore it is frequently used for engine and vehicle applications. SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 12/2016 Page 1 DOG2 MEMS SERIES CAN J1939 INCLINOMETER Dimensions [mm] Vector of gravity (zero position) SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 12/2016 Page 2 DOG2 MEMS SERIES CAN J1939 INCLINOMETER PARAMETERS Parameter Value Comment Range Accuracy, typ. Accuracy, typ. Resolution Refresh rate Startup time Supply/excitation voltage Supply current, typ. ±90° 0.5° 0.15° 0.01° 100 Hz <1 s 8 – 30 V <30 mA Output x-axis and y-axis Interface SAE J1939 CAN2.0B Dual axis sensor T= -40 °C – 85 °C T= 25 °C Limited by CAN protocol Internal processing After power cycle Direct current (DC) stabilized Typ. 20mA, peak 30mA during transmit Linearized and temperature compensated angles in degree, reference is plane perpendicular to vector of gravity = earth surface 250 kbps Source Address: G-NSDOG2-200: 0xC2 (fix) G-NSDOG2-207: 0xC0 (default); settable in the range of [0x80 – 0xF7] Requires 4-pos. plug housing, AMP Superseal 1.5-Series at connecting harness, TE Connectivity part-no. 282088-1 PUR, length incl. connector 400 mm, full temperature range, flexible AMP Superseal 1.5-Series, 4-pos. cap housing, TE Connectivity part-no. 282106-1 4 wire 0.25 mm2, Cable outer diameter Ø3.9 mm Operation temperature range -40 °C – 85 °C Storage temperature range -40 °C – 85 °C Weight, typ. 60 g Dimensions 70.5 mm x 45 mm x 15 mm Connector WxDxH CONNECTOR PINNING Pin 1 2 3 4 Function VCC GND CAN H CAN L Description 8 to 30 VDC supply input (+) GND CAN high line , in/out CAN low line , in/out The CAN J1939 detailed description is included in the specification, which is available on request. SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 12/2016 Page 3 DOG2 MEMS SERIES CAN J1939 INCLINOMETER FUNCTION VIEW +Y -X Y-Axis +X X-Axis -Y This DOG2 MEMS series CAN J1939 inclinometer is designed for floor mount application. ORDERING INFORMATION PART NUMBER SHORT DESCRIPTION G-NSDOG2-200 Dual axis tilt sensor, range +/-90 deg, Vcc 8 – 30 VDC, CAN J1939 Interface G-NSDOG2-207 Dual axis tilt sensor, range +/-90 deg, Vcc 8 – 30 VDC, CAN J1939 Interface, Source address range [0xC0, 0x80 – 0xF7]; see specification for details For other orientations, measurement ranges or supply voltages please contact TE Connectivity sales representatives. NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company 1000 Lucas Way Hampton, VA 23666 United States Phone: +1-800-745-8008 Fax: +1-757-766-4297 Email: [email protected] Web: www.te.com/sensorsolutions TE Connectivity Sensors Germany GmbH Hauert 13 D-44227 Dortmund Germany Phone: +49-(0)231-9740-0 Fax: +49-(0)231-9740-200 Email: [email protected] Web: www.te.com/sensorsolutions Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Phone: +86-755-33305088 Fax: +86-755-33305099 Email: [email protected] Web: www.te.com/sensorsolutions TE.com/sensorsolutions TE Connectivity Sensors Germany GmbH, a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2016 TE Connectivity Ltd. family of companies All Rights Reserved. SENSOR SOLUTIONS /// DOG2 MEMS SERIES CAN J1939 INCLINOMETER 12/2016 Page 4