Kemet F845FD103M760C Metallized polypropylene film emi suppression capacitor Datasheet

Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Overview
Applications
The PHE845 Series is constructed of metallized polypropylene
film encapsulated with self-extinguishing resin in a box of material
meeting the requirements of UL 94 V–0.
For use as a electromagnetic interference (EMI) suppression
filter in across-the-line applications requiring X1 safety
classification. Suitable for use in situations where failure of the
capacitor would not lead to danger of electric shock.
Benefits
•
•
•
•
•
•
•
•
•
•
•
•
Approvals: ENEC, UL, cUL
Class X1 (IEC 60384-14)
Rated Voltage: 760VAC 50/60Hz
Capacitance range: 0.01 – 1.0 µF
Lead spacing: 22.5 – 37.5 mm
Capacitance tolerance: ±20%, ±10%
Climatic category 40/105/56/B, IEC 60068-1
Tape and reel in accordance with IEC 60286-2
RoHS Compliant and lead-free terminations
Operating temperature range of -40˚C to +105˚C
100% screening factory test at 4,250 VDC
Self-healing properties
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Legacy Part Number System
PHE845
V
D
5100
M
R06L2
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Capacitance Code (pF)
Capacitance
Tolerance
Packaging
X1, Metallized
Polypropylene
V = 760
D = 22.5
F = 27.5
R = 37.5
The last three digits
represent significant
figures. The first digit
specifies the total
number of digits.
K = ±10%
M = ±20%
See Ordering Options
Table
New KEMET Part Number System
F
Capacitor
Class
F = Film
845
D
Series
Lead Spacing
(mm)
D = 22.5
F = 27.5
R = 37.5
X1, Metallized
Polypropylene
D
103
M
760
C
Size Code
Capacitance Code (pF)
Capacitance
Tolerance
Rated Voltage
(VAC)
Packaging
See
Dimension
Table
First two digits represent
significant figures. Third digit
specifies number of zeros.
K = ±10%
M = ±20%
760 = 760
See Ordering
Options Table
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
1
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
6 +0/-1
C
R06L2(1)
Pizza Pack
6 +0/-1
Z
R06L2(1)
Bulk (Tray)–Long Leads
30 +0/-1
ALW0L
R30L2
Tape & Reel (Standard Reel)
H0= 18.5 +/-0.5
L
R17T0
Tape & Reel (Large Reel)
H0= 18.5 +/-0.5
P
R17T1
6 +0/-1
C
R06L2(1)
6 +0/-1
30 +0/-1
H0= 18.5 +/-0.5
Z
ALW0L
P
R06L2(1)
R30L2
R17T1
6 +0/-1
C
R06L2(1)
6 +0/-1
Z
R06L2(1)
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
22.5
Other Lead and Packaging Options
Standard Lead and Packaging Options
Bulk (Tray)–Short Leads
27.5
Other Lead and Packaging Options
Pizza Pack
Bulk (Tray)–Long Leads
Tape & Reel (Large Reel)
Standard Lead and Packaging Options
37.5
Bulk (Tray)–Short Leads
Other Lead and Packaging Options
Pizza Pack
(1) Please specify Bulk (Tray) or Pizza Packaging
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
2
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
B
H
d
0.5
LL
p
p
B
H
L
d
KEMET Size
Code
Legacy Size
Code
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
DD
DG
DM
DR
DT
DW
DY
FE
FG
FK
FS
FV
RH
RK
RM
RP
D13
D17
D15
D18
D16
D20
D19
F11
F12
F03
F15
F16
R04
R02
R03
R06
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.4
+/- 0.5
+/- 0.5
+/- 0.5
+/- 0.5
6.5
7.0
9.0
10.5
11.0
13.5
15.5
10.5
11.5
13.5
19.0
21.0
15.0
16.5
19.0
21.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
14.5
16.5
18.5
19.0
21.5
23.0
24.5
20.5
22.5
23.0
29.0
30.0
26.0
32.0
36.0
38.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
26.0
26.0
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
3
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type. Triple design.
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
Rated Voltage (VR)
760 VAC 50/60 Hz
Capacitance Range
0.010 µF to 1.0 µF
Capacitance Values
E6 series (IEC 60063)
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
Related Documents
±20% standard, ±10% option
-40°C to 105°C
40/105/56/B IEC 60068-1
ENEC, UL, cUL
EN/IEC 60384-14:2005, UL 60384-14, CAN/CSA E60384-14:09
Maximum Values at +23°C
Dissipation Factor (tanδ)
Test Voltage Between Terminals
Resonance Frequency
Frequency
C ≤ 0.1 μF
0.1 µF < C ≤ 1 µF
1 kHz
0.1%
0.1%
10 kHz
0.2%
0.4%
100 kHz
0.6%
-
The 100% screening factory test is carried out at 4,250 VDC. The voltage level is selected to meet the requirements in
applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this
test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures.
Tabulated self-resonance frequencies fo (see Table 1 - Ratings & Part Number Reference)
Measured at +25°C ±5°C, according to IEC 60384–2
Insulation Resistance
In DC Applications
Minimum Values Between Terminals
C ≤ 0.33 μF
C > 0.33 μF
≥ 30,000 MΩ
≥ 10,000 MΩ • µF
Recommended voltage ≤ 1,500 VDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
4
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Environmental Test Data
Test
IEC Publication
Procedure
Endurance
IEC 60384-14:2005
Vibration
IEC 60068–2–6 Test Fc
Bump
IEC 60068-2-29 Test Eb
Change of Temperature
IEC 60068-2-14 Test Na
Active Flammability
IEC 60384-14:2005
VR + 20 surge pulses at 4 kV (pulse every 5 seconds)
Passive Flammability
IEC 60384-14:2005
IEC 60384–1, IEC 60695–11–5 Needle Flame Test
Damp Heat Steady State
IEC 60068-2-78 Test Cab
1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
No visible damage. No open or short circuit.
1,000 bumps at 390 m/s2
No visible damage. No open or short circuit.
Upper and lower rated temperature 5 cycles
No visible damage.
+40°C and 90 – 95% RH, 56 days
Approvals
Certification Body
Mark
Specification
File Number
Intertek Semko AB
EN/IEC 60384-14
SE/0140–17D
UL
UL 60384 and
CAN/CSA E60384-14:09
(760 VAC)
E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
5
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Table 1 – Ratings & Part Number Reference
Max Dimensions in mm
Capacitance
Size Code
Value (µF) (New/Legacy)
B
H
L
Lead
Spacing (p)
fo
dV/dt
(MHz) (V/µs)
New KEMET
Part Number
Legacy Part
Number
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.10
0.15
0.22
0.33
0.47
0.47
0.47
0.68
1.0
DD/D13
DD/D13
DD/D13
DF/D17
DM/D15
DR/D18
DT/D16
DW/D20
DY/D19
FE/F11
FG/F12
FK/F03
FS/F15
FV/F16
RH/R04
RK/R02
RM/R03
RP/R06
6.5
6.5
6.5
7.0
9.0
10.5
11.0
13.5
15.5
10.5
11.5
13.5
19.0
21.0
15.0
16.5
19.0
21.0
14.5
14.5
14.5
16.5
18.5
19.0
21.5
23.0
24.5
20.5
22.5
23.0
29.0
30.0
26.0
32.0
36.0
38.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
31.5
31.5
31.5
31.5
31.5
41.0
41.0
41.0
41.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
11
9.2
7.6
6.4
5.3
4.4
3.5
3.1
2.7
3.4
3.0
2.4
2.0
1.6
1.6
1.6
1.2
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
F845DD103(1)760(2)
F845DD153(1)760(2)
F845DD223(1)760(2)
F845DF333(1)760(2)
F845DM473(1)760(2)
F845DR683(1)760(2)
F845DT104(1)760(2)
F845DW154(1)760(2)
F845DY224M760(2)
F845FE104(1)760(2)
F845FG154(1)760(2)
F845FK224(1)760(2)
F845FS334(1)760(2)
F845FV474M760(2)
F845RH474M760(2)
F845RK474(1)760(2)
F845RM684(1)760(2)
F845RP105M760(2)
PHE845VD5100(1)(2)
PHE845VD5150(1)(2)
PHE845VD5220(1)(2)
PHE845VD5330(1)(2)
PHE845VD5470(1)(2)
PHE845VD5680(1)(2)
PHE845VD6100(1)(2)
PHE845VD6150(1)(2)
PHE845VY6220M(2)
PHE845VF6100(1)(2)
PHE845VF6150(1)(2)
PHE845VF6220(1)(2)
PHE845VF6330(1)(2)
PHE845VZ6470M(2)
PHE845VW6470M(2)
PHE845VR6470(1)(2)
PHE845VR6680(1)(2)
PHE845VW7100M(2)
Capacitance
Value (µF)
Size Code (New/
Legacy)
B (mm)
H (mm)
L (mm)
Lead Spacing (p)
fo (MHz)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part Number
(1) M = ±20%, K = ±10%.
(2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
6
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
First wave
Temperature (°C)
Recommended Soldering Temperature
Soldering iron bit temperature (deg C)
400
350
300
250
Second wave
200
Cooling
ΔT <150°C
Preheating
150
ca 2°C/s
ca 3.5°C/s typical
Tpreheat
100
ca 5°C/s
115°C max
100°C
Typical
200
50
150
100
0
0
50
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
The soldering iron tip temperature should be set
at 350°C (+10°C maximum) with the soldering
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
7
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Paper
130°C
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be
soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
8
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Construction
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Detailed Cross Section
Molded Plastic
Case
Self-Extinguishing
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
FILM WINDING SCHEME OPTIONS
Single-sided Metallized Polypropylene Film
Double-sided
Margin
Metal Contact
Layer
Single-sided
Metallized
Polypropylene
Film
1 Section
Metal Contact
Layer
Margin
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polyester Carrier
Film
Leads
2 Sections
Polypropy
Film Diele
1 Section
Winding Scheme
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
3 Sections
4 Sections
Metallized Impregnated Paper
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
Double-sided
Metallized
Polyester Carrier
Film
Polypropy
Film Diele
3 Sections
Polyp
Metallized Polyphenylene
Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
© KEMET Electronics
Corporation • P.O. Box 5928 • Greenville, 1SC
29606 (864) 963-6300 • www.kemet.com
Section
1 Section
Metal Foil
F3109_PHE845_X1_760 • 5/15/2015
1 Section
Polypr
Film D
9
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Marking
FRONT
TOP
RIFA
Logo
Series
Rated
Voltage
Approval
Marks
IEC
Climatic
Category
Capacitance
Capacitance
Tolerance
Manufacturing
Date Code
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
H
J
K
L
M
January
February
March
April
May
June
July
August
September
October
November
December
1
2
3
4
5
6
7
8
9
O
N
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
10
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Packaging Quantities
KEMET
Legacy
Size Code Size Code
DD
DH
DM
DT
DF
DR
DY
DW
D13
D14
D15
D16
D17
D18
D19
D20
FK
FE
FG
FM
FR
FS
FV
FH
FT
FQ
F03
F11
F12
F13
F14
F15
F16
F17
F18
F19
RK
RM
RH
RF
RP
RS
R02
R03
R04
R05
R06
R08
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Standard
Reel
ø 360 mm
Large
Reel
ø 500 mm
Ammo
Bulk
(Pizza)
22.5
6.5
8.0
9.0
11.0
7.0
10.5
15.5
13.5
14.5
16.0
18.5
21.5
16.5
19.0
24.5
23.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
234
186
308
253
216
264
176
209
300
250
250
200
300
200
110
160
600
500
500
400
600
400
250
300
440
352
308
253
396
264
176
209
23.0
20.5
22.5
24.5
28.0
29.0
30.0
12.5
18.5
16.0
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
171
216
198
153
126
117
108
108
72
81
250
350
300
250
27.5
13.5
10.5
11.5
14.5
17.5
19.0
21.0
21.0
31.0
27.5
171
216
198
153
126
117
108
108
72
81
37.5
16.5
19.0
15.0
13.0
21.0
28.0
32.0
36.0
26.0
24.0
38.0
43.0
41.0
41.0
41.0
41.0
41.0
41.0
105
91
119
140
84
54
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
105
91
119
140
84
54
F3109_PHE845_X1_760 • 5/15/2015
11
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, 0Class X1, 760 VAC, 105°C
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 22.5 – 27.5 mm
0
rom 10 and
15 mmSpecification
to 7.5 mm
Taping
Description
Dimensions (mm)
Symbol
Lead Space
22.5
27.5
Tolerance
Lead spacing
F
22.5
27.5
+0.6/-0.1
Carrier tape width
W
18
18
+1/-0.5
Hold down tape width
W0
10
10
Minimum
Hole position
W1
9
9
+ 0.75/-0.5
Hold down tape position
W2
3
3
Maximum
Feed hole diameter
D0
4
4
± 0.2
Feed hole lead space*
P0
12.7
12.7
± 0.2**
Centering of the lead wire
P1
7.8
5.3
± 0.7
Component alignment
∆h
2
2
±2
Deviation tape – plane
∆p
1.3
1.3
Maximum
t
0.9
0.9
Maximum
H0***
18.5
18.5
± 0.5
Tape thickness
Height of component
from tape center
*Available also 15mm.
**Maximum 1 mm on 20 lead spaces.
*** H0 = 16.5 mm is available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
12
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
13
Film Capacitors – Metallized Polypropylene Film EMI Suppression Capacitors
PHE845 Series, Class X1, 760 VAC, 105°C
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3109_PHE845_X1_760 • 5/15/2015
14