I&Q NETWORKS IQG-20E Series Units to 1 GHz / Low Loss / Close Tolerance in Both Phase and Amplitude / Hi-Rel Hermetic Package Performance over Video Bandwidth (LO at 500 MHz) PRINCIPAL SPECIFICATIONS Model LO Frequency, Number fo, MHz IQG-20E-***B 20 - 160 IQG-20E-***B 160 - 1000 † Video BW, MHz 50 100 For Model Number replace *** with LO Center Frequency, fo in MHz. GENERAL SPECIFICATIONS General Notes: 1. I & Q networks are integrated networks that produce two quadrature phased, equal amplitude signals when fed RF and LO signals. 2. The IQG-20E is specially tailored for high accuracy at a specified LO frequency. It maintains the minimum specified performance across a band equal to 10% of the LO frequency. 3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. RF/LO Input Characteristics (50 Ω nom.) VSWR: 1.5:1 max. RF Bandwidth: 10% of fo Power Level: 0 dBm nom. LO Power Level @ fo: +10 dBm nom. Conversion Loss (RF to I/Q): 10 dB typ,12 dB max. IF Quadrature Balance (I to Q),@100 kHz IF Phase, @ LO=fo: ±1° nom., ±2° max. Phase, @ LO=fo±5%: ±3° nom., ±5° max. Ampl., @ LO=fo: 0.2 dB max. Ampl., @ LO=fo±5%: 0.5 dB max. Weight, nominal: 0.32 oz (9 g) Operating Temp: -- 55° to +85°C † RF and Video Bandwidths are typically much greater than specified. E - Size Surface Mount NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. All unmarked pins are case ground. 13Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531