DC/DC Converter E_XT-1WAR2 Series FEATURES 1W, Fixed input voltage, isolated & unregulated dual output z Operating temperature range: -40℃ to +105℃ z High efficiency up to 82% z Miniature SMD package z Isolation voltage: 3K VDC z Internal surface mounted design z No external component required z International standard pin-out Patent Protection RoHS E_XT-1WAR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for 1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2. Where isolation between input and output is necessary (isolation voltage ≤3000VDC); 3. Where the output voltage regulation is not strictly required; 4. Typical application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition; Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. Selection Guide Input Voltage (VDC) Certification Part No. Efficiency (%,Min./Typ.) Nominal Output Voltage Output Current (mA) (Range) (VDC) (Max./Min.) 3.3 (2.97-3.63) ±5 ±100/±10 72/76 ±12 ±42/±5 73/77 E0505XT-1WAR2 ±5 ±100/±10 76/80 E0509XT-1WAR2 ±9 ±56/±6 76/80 ±12 ±42/±5 75/79 E0305XT-1WAR2 E0312XT-1WAR2 E0512XT-1WAR2 E0515XT-1WAR2 5 (4.5-5.5) @ Full Load ±15 ±33/±3 77/81 E0524XT-1WAR2 ±24 ±21/±2 77/81 E1205XT-1WAR2 ±5 ±100/±10 76/80 ±9 ±56/±6 76/80 ±12 ±42/±5 77/81 ±15 ±33/±3 77/81 ±24 ±21/±2 77/81 ±15 ±33/±3 77/81 ±5 ±100/±10 76/80 E1209XT-1WAR2 CE Output E1212XT-1WAR2 E1215XT-1WAR2 12 (10.8-13.2) E1224XT-1WAR2 E1515XT-1WAR2 15 (13.5-16.5) E2405XT-1WAR2 E2409XT-1WAR2 E2412XT-1WAR2 E2415XT-1WAR2 24 (21.6-26.4) E2424XT-1WAR2 ±9 ±56/±6 76/80 ±12 ±42/±5 77/81 ±15 ±33/±3 78/82 ±24 ±21/±2 72/76 Max. Capacitive Load (μF) 100 Note: *The capacitive loads of positive and negative outputs are identical. Input Specifications Item Input Current (full load / no-load) Reflected Ripple Current Operating Conditions Min. Typ. Max. 3.3V input -- 389/25 --/70 5V input -- 250/20 --/60 12V input -- 104/15 --/50 15V input -- 83/12 --35 24V input -- 52/10 --/30 -- 15 -- 2015.04.14-A/2 Unit mA mA Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter E_XT-1WAR2 Series Surge Voltage (1sec. max.) 3.3V input -0.7 -- 5 5V input -0.7 -- 9 12V input -0.7 -- 18 15V input -0.7 -- 21 24V input -0.7 -- 30 Input Filter VDC Filter capacitor Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Output Voltage Accuracy Max. Unit See tolerance envelope curve(Fig. 1) Line Regulation Input voltage change: ±1% Load Regulation 10%-100% load -- ±1.2 5VDC output -- 12 -- -- 9 -- 12VDC output -- 8 -- 15VDC output -- 7 -- 20MHz bandwidth Temperature Coefficient -- 9VDC output 24VDC output Ripple & Noise* Short Circuit Protection** Typ. -- % -- 6 -- -- 60 150 mVp-p Full load -- -- ±0.03 %/℃ E24xxXT-1WAR2/E0524XT-1WAR2 -- -- 1 s Others Continuous, self-recovery Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation; **Supply voltage must be discontinued at the end of short circuit duration for E0524XT-1WAR2 model and E24xxXT-1WAR2 series. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 3000 -- -- VDC Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to 100℃, (see Fig. 2) Storage Temperature -40 -- 105 -55 -- 125 Casing Temperature Rise Ta=25℃, nominal input, full load output -- 25 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 Storage Humidity Non-condensing -- -- 95 ℃ %RH Peak temp.≤245℃, maximum duration time≤60s at 217℃. For actual application, please refer to IPC/JEDEC J-STD-020D.1. Reflow Soldering Temperature Switching Frequency Full load, nominal input voltage MTBF MIL-HDFK-217F@25℃ -- 100 -- KHz 3500 -- -- K hours Physical Specifications Casing Material Black flame-retardant heat-proof epoxy resin (UL94-V0) Dimensions 15.24*11.20*7.25 mm Weight 2.0g (Typ.) Cooling Method Free convection EMC Specifications EMI EMS CE CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit) RE CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit) ESD IEC/EN61000-4-2 Contact ±6KV perf. Criteria B 2015.04.14-A/2 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter E_XT-1WAR2 Series +15% Tolerance Envelope Cur ve +10% Output Po we r Percentage(%) Output Voltage Accuracy (%) Product Characteristic Curve Max . +5% Ty p. 0 +2.5% M in. -5% -2.5% -7.5% -10% 10% 20% 40% 60% 80% 100% Te mp era t ur e Dera t ing Curv e 120 100 80 60 Safe Operating Area 40 20 0 -40 Output Current Percent(%) (Nominal Input Voltage) 40 80 100 105 0 Ambient Tempe rature( ℃) Fig. 2 Fig. 1 Efficiency Vs Output Load(Vin=5V) Efficiency Vs Input Voltage (Full Load) 95 90 90 80 85 70 E0505XT-1WAR2 80 75 70 65 60 Efficiency(%) 100 Efficiency(%) 100 55 60 50 40 30 20 10 50 4.5 4.6 4.7 4.8 4.9 5 0 5.1 5.2 5.3 5.4 5.5 10 Input Voltage(V) 20 30 40 50 60 70 80 90 100 Output Current Percentage (%) Efficiency Vs Input Voltage (Full Load) Efficiency Vs Output Load(Vin=12V) 100 100 95 90 90 80 85 E1205XT-1WAR2 80 75 70 65 60 Efficiency(%) Efficiency(%) E0505XT-1WAR2 E1205XT-1WAR2 70 60 50 40 30 20 55 10 50 0 10.8 11.1 11.4 11.7 12.0 12.3 12.6 12.9 13.2 10 Input Voltage(V) 20 30 40 50 60 70 80 Output Current Percentage (%) 90 100 Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. Recommended capacitive load value table (Table 1) Vin GND Cin DC DC Fig.3 Cout Cout +Vo 0V -Vo Vin(VDC) Cin(μF) Vo (VDC) Cout(μF) 3.3 4.7 ±5 4.7 5 4.7 ±9 2.2 12 2.2 ±12 1 15 2.2 ±15 1 24 1 ±24 0.47 2015.04.14-A/2 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter E_XT-1WAR2 Series 2. EMC solution-recommended circuit LDM Vin DC/DC C1 GND Input voltage (VDC) +Vo Vin GND LOAD C2 EMI -Vo 3.3/5/12 15/24 C1 4.7μF /50V C2 Refer to the Cout in Fig.3 LDM 6.8μH CY -- 1nF /3KV Note: 1. 24V input series, 24V output series is subject to CY (CY : 1nF/3KV). 2. It is not needed to add the component in the peripheral circuit when parameter with the symbol of "--". CY Fig. 4 3. Output load requirements When using, the minimum load of the module output should not be less than 10% of the nominal load. In order to meet the performance parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a resistor, Please note that the resistor needs to be used in derating. 4. For more information please find DC-DC converter application notes on www.mornsun-power.com Dimensions and Recommended Layout THIRDANGLEPROJECTION 0.60[0.024] 2.10[0.083] 7 TopView 1 2 4 5 12.20[0.480] 10 0.25[0.010] A 0 ~5 ° 8.30[0.327] TopView 11.20±0.30[0.441±0.012] 15.24±0.50[0.600±0.020] 2.54[0.100] 10.16[0.400] 1.00[0.039] 2.54[0.100] 10.16[0.400] 7.00[0.276] 7.25[0.285] Note:Grid2.54*2.54mm FrontView RightView A Pin-Out 0.88[0.035] 0.10 Note: Unit:mm[inch] Pinsectiontolerances:±0.10[±0.004] Generaltolerances:±0.25[±0.010] Pin Function 1 GND 2 Vin 4 0V 5 -Vo 7 +Vo 10 NC NC:NoConnection 2EXT1WAR201-A1 2015.04.14-A/2 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter E_XT-1WAR2 Series Notes: 1. 2. 3. 4. 5. 6. 7. 8. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58210023; If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; The maximum capacitive load offered were tested at nominal input voltage and full load; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃ , humidity<75% with nominal input voltage and rated output load; All index testing methods in this datasheet are based on our Company’s corporate standards; The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model products may exceed the requirements mentioned above. Please contact our technicians directly for specific information; We can provide product customization service; Specifications are subject to change without prior notice. MORNSUN Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected] 2015.04.14-A/2 Page 5 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation