HC SERIES Common Mode Chokes Common mode chokes with Nanocrystalline cores Features -Nominal current in each winding (I): from 2A to 30A. -Nominal inductance (L): from 6mH to 28mH. -Rated voltage: 250Vac. -Test voltage: 1.5kVac, winding to winding. -Creepage distance: 3mm, winding to winding. -Ambient temperature: from –40ºC to +50ºC. -Storage temperature: from –40ºC to +120ºC. -Plastic case: UL 94V-0 listed. -According to UL 1283. Electrical specifications Code IAC (A) L (mH) at 10kHz +50% / -30% L (mH) at 100kHz minimum IZI (Ω) at 100kHz typical Rdc (mΩ) typical ØPIN (mm) ±0,1 HC140-02V1 2 2 x 14 2 x 1,5 2000 110 0,5 HC6R5-04V1 4 2 x 6,5 2 x 0,65 1600 31,5 0,75 HC280-04V1 4.5 2 x 28 2 x 4,5 4500 42 0,7 HC190-06V2 6 2 x 19 2 x 2,7 3500 37 0,8 HC130-08V2 8 2 x 13 2 x 1,8 2000 20 0,95 HC9R0-10V2 10 2x9 2 x 1,4 1500 18 0,9 HC110-13V2 13 2 x 11 2 x 1,3 1600 11 1,25 HC6R0-15V3 15 2x6 2 x 2,0 1000 10 1,2 HC6R0-30V3 30 2x6 2 x 0,5 1000 3 2,2 HC9R0-10H1 10 2x9 2 x 1,4 1500 18 0,9 HC110-13H1 13 2 x 11 2 x 1,3 1600 10 1,25 HC1R6-20H1 20 2 x 1,6 2 x 0,2 250 3 1,6 HC130-16H2 16 2 x 13 2 x 1,2 1800 6,6 1,6 HC1R2-25H2 25 2 x 1,2 2 x 0,4 370 3 1,8 HC4R9-20H3 20 2 x 4.9 2 x 1,4 1600 7 1,7 HC3R6-25H3 25 2 x 3,6 2 x 1,1 1000 5,5 1,8 HC2R6-32H3 32 2 x 2,6 2 x 0,3 400 2,5 2,2 117 HC SERIES Common Mode Chokes Common mode chokes with Nanocrystalline cores 118 Dimensions (in mm) Code A MAX B MAX C MAX HC-V1 28,5 18 HC-V2 37,0 22 HC-V3 55,0 30 D ±0,2 E ±0,2 L ±1,0 30 7,62 15,24 4 37 15,24 25,4 4 56 20,32 35,56 5 J ±0,2 L ±1,0 - - 4 7 15 5 20 5 Code A MAX B MAX C ±0,2 D ±0,2 HC-H1 37,5 23 13,5 23 - - - - HC-H2 42,5 26 - - 5 5 5 5 HC-H3 55,5 31 - - 12,5 10 7,5 7,5 4,5 E ±0,2 F ±0,2 G ±0,2 H ±0,2 I ±0,2 HC SERIES Curves: Impedance vs. Frequency Common Mode Chokes Common mode chokes with Nanocrystalline cores Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 119 HC SERIES Common Mode Chokes Common mode chokes with Nanocrystalline cores Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 120 HC SERIES Common Mode Chokes Common mode chokes with Nanocrystalline cores Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 121 SC SERIES Common Mode Chokes Common mode chokes with Ferrite cores - SMD format Features -Nominal current in each winding (I): from 0,4A to 2,5A. -Nominal inductance (L): from 5µH to 4,7mH. -Rated voltage: 42Vac. -Storage temperature: from -40ºC to 120ºC. -Plastic case: UL 94V-0. -Packaging: tape & reel - 600 u. x reel -Suitable for CAN Bus. Electrical specifications Code IAC (A) L (µH) at 10kHz +50% / -30% Lleak (nH) at 100kHz typical 1,2 2,5 2,5 0,8 0,8 0,8 0,7 0,7 0,5 0,4 2x5 2x6 2x6 2x11 2x25 2x51 2x470 2x1000 2x2200 2x4700 50 50 400 50 1500 2000 2500 250 250 300 SC-050-X SC-060-X SC-060-H SC-110-X SC-250-H SC-510-H SC-471-H SC-102-X SC-222-X SC-472-X Notes X: Bifilar windings H: Symmetrical windings Dot on the top of the box indicates pin 1 Dimensions (in mm) SC SERIES 122 Rdc (mΩ) typical 70 20 20 120 130 160 200 200 400 550 Visol (Vac) 180 180 180 180 180 180 550 550 550 550