SMT Inductors, SIMID Series B82422-H****-+100 SIMID 1210-H100 High-current version Size 1210 (EIA) or 3225 (IEC) Rated inductance 1 to 100 µH Rated current 90 to 650 mA Construction ■ Ferrite core ■ Laser-welded winding ■ Flame-retardant encapsulation Features ■ Very high current handling capability ■ Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling DC/DC converters Automotive electronics Telecommunications Terminals ■ ■ ■ ■ ■ Electro-plated 0,4 µm Cu; 1–2 µm Ag; 5–7 µm Sn Base material CuSn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking Marking on component: Manufacturer and letter »H«, L value (in nH) and tolerance of L value (coded), date of manufacture (coded) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel For details on taping, packing and packing units see page 153 105 04/00 SMT Inductors, SIMID Series B82422-H****-+100 SIMID 1210-H100 General technical data Rated inductance LR Measured with impedance analyzer HP 4194A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4194A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 40 K at rated temperature of 85°C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance Rmax Measured at 20°C ambient temperature, measuring current < IR Climatic category In accordance with IEC 60068-1 55/125/56 (– 55°C/+ 125°C/56 days damp heat test) Solderability In accordance with IEC 60062-2-58 (215 ± 3)°C, (3 ± 0,3) s Wetting of soldering area: ≥ 90 % Resistance to soldering heat In accordance with IEC 60068-2-20 260°C, 10 s ∆L /L ≤ ± 3 % Permissible PCB bending 2 mm (100 mm long standard PCB) Weight Approx. 50 mg 106 04/00 SMT Inductors, SIMID Series B82422-H****-+100 SIMID 1210-H100 Dimensional drawing 2±0,1 1) 0,5±0,2 1) 0,15 max. 2±0,1 1) 0,4 min.1) 3,2+0,3 2,5+0,3 Beschriftung Marking SSB0790-I A Layout recommendation B C D B SSB1227-Z Dimensions (mm) A B C D Wave soldering 2,3 1,60 2,1 5,3 Reflow soldering 2,7 1,15 2,1 4,4 1) Soldering area, tinned 107 04/00 SMT Inductors, SIMID Series B82422-H****-+100 SIMID 1210-H100 Characteristics and ordering codes LR µH1) fres, min MHz Ordering code 2) (∅ 180-mm reel) 0,22 0,27 0,33 200 120 85 B82422-H1102-K100 B82422-H1152-K100 B82422-H1222-K100 500 430 380 0,42 0,48 0,75 60 46 38 B82422-H1332-K100 B82422-H1472-K100 B82422-H1682-K100 2,52 2,52 2,52 300 260 220 1,20 1,50 2,40 30 26 22 B82422-H1103-K100 B82422-H1153-K100 B82422-H1223-K100 15 15 15 2,52 2,52 2,52 200 180 160 3,00 3,30 4,10 20 17 15 B82422-H1273-K100 B82422-H1333-K100 B82422-H1393-K100 15 15 15 2,52 2,52 2,52 140 110 90 4,70 7,70 11,5 14 9 7 B82422-H1473-K100 B82422-H1683-K100 B82422-H1104-K100 Tolerance1) fL MHz Qmin fQ MHz IR mA ± 10 % ^ K 1 1 1 10 10 10 7,96 7,96 7,96 650 600 560 1 1 1 10 10 10 7,96 7,96 7,96 10 15 22 1 0,1 0,1 15 15 15 27 33 39 0,1 0,1 0,1 47 68 100 0,1 0,1 0,1 1,0 1,5 2,2 3,3 4,7 6,8 Rmax Ω Further E12 ratings upon request. 1) Intermediate values and closer tolerances upon request. 2) For reel size ∅ 330 mm append code number »8«. Example: B82422-H1102-K108 108 04/00 SMT Inductors, SIMID Series B82422-H****-+100 SIMID 1210-H100 Impedance |Z | versus frequency f measured with impedance analyzer HP 4194A SSB1382-8 10 3 SSB1381-Z 10 5 Ω |Z | Inductance L versus dc load current IDC measured with LCR meter HP 4275A µH L 10 4 100 µH 100 µH 10 2 10 µ H 10 1 10 3 10 µH 10 2 1 µH 1 10 -1 10 0 10 -2 10 10 -1 3 10 10 4 10 5 kHz f 10 -3 10 -2 10 6 Q factor versus frequency f measured with impedance analyzer HP 4194A 10 -1 10 0 A Ι DC 10 1 Current derating Iop/IR versus ambient temperature TA SSB1383-G 100 Q 1 µH 10 0 SSB0893-E 1,2 IΙop B 90 IΙRR 80 70 1,0 0,8 60 0,6 50 40 30 100 µH 0,4 1 µH 20 0,2 10 0 2 10 10 µH 10 3 10 4 10 5 kHz 10 6 f 0 0 109 04/00 20 40 60 80 100 C 140 TA