Datatronic DR358-6-333 Shielded smd inductor dr358-6 sery Datasheet

September 23, 2009
SHIELDED SMD INDUCTOR DR358-6 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 3.3µH to 100.0µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR358-6-332
DR358-6-502
DR358-6-622
DR358-6-742
DR358-6-872
DR358-6-103
DR358-6-123
DR358-6-153
DR358-6-183
DR358-6-223
DR358-6-273
DR358-6-333
DR358-6-393
DR358-6-473
DR358-6-563
DR358-6-683
DR358-6-823
DR358-6-104
Inductance
(H)  30%
3.3
5.0
6.2
7.4
8.7
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
DCR
() Max.
0.020
0.024
0.030
0.033
0.034
0.038
0.053
0.057
0.092
0.096
0.109
0.124
0.138
0.155
0.202
0.234
0.324
0.358
I rated
(A) Max.
3.50
2.90
2.40
2.30
2.20
2.00
1.70
1.60
1.50
1.30
1.20
1.10
1.00
0.95
0.85
0.75
0.70
0.65
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irated for an approximate 40C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 1000 pcs/reel
7. For non-RoHS part replace DR prefix with 42- (e.g. DR358-6 becomes 42-358-6)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.