O D LV- 6 5 65W PWM Output LED Driver F M M SELV ■ Features Constant Voltage PWM style output with frequency 1KHz Plastic housing with class II design Built-in active PFC function No load power consumption<0.5W(Blank-Type) IP67 rating for indoor or outdoor installations Function options: 2 in 1 dimming (dim-to-off); IP67 series Type HL ■ Applications LED strip lighting Indoor LED lighting LED decorative lighting LED architecture lighting Auxiliary DC output 3 years warranty ■ Description ODLV-65 series is a 65W AC/DC LED driver featuring the constant voltage mode PWM style design. ODLV-65 operates from 180~295VAC and offers models with different rated voltage ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLV-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system. ■ Model Encoding ODLV - 65 A - 12 Rated output voltage(12/24/36/48/60V) Function options Rated wattage Series name Type Blank A Function 2 in 1 dimming (0~10VDC and 10V PWM) 2 in 1 dimming and Auxiliary DC output Note In Stock In Stock File Name:ODLV-65-SPEC 2016-12-01 O D LV- 6 5 65W PWM Output LED Driver series SPECIFICATION MODEL DC VOLTAGE OUTPUT ODLV-65 -12 ODLV-65 -24 ODLV-65 -36 ODLV-65 -48 ODLV-65 -60 12V 24V 36V 48V 60V RATED CURRENT 4.2A 2.4A 1.8A 1.35A 1.08A RATED POWER 50.4W 57.6W 64.8W 64.8W 64.8W 89% 90% DIMMING RANGE 0~100% VOLTAGE TOLERANCE ±10% PWM FREQUENCY (Typ.) 1KHz(±20%) SETUP TIME Note.3 500ms / 230VAC AUXILIARY DC OUTPUT Note.4 Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only 254 ~ 417VDC VOLTAGE RANGE Note.2 180 ~ 295VAC (Please refer to "STATIC CHARACTERISTIC" section) INPUT FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@load≧60%/230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section) EFFICIENCY (Typ.) 85% 87% 88% AC CURRENT (Typ.) 0.4A/230VAC INRUSH CURRENT(Typ.) COLD START 30A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 0.3A/277VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION <0.5W for Blank-Type, <1.2W for A-Type SHORT CIRCUIT PROTECTION ENVIRONMENT SAFETY & EMC OVER CURRENT 105 ~ 115% Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) MAX. CASE TEMP. Tcase=+85℃ 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 45℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level( surge immunity:Line-Line:1KV ) MTBF OTHERS DIMENSION PACKING NOTE Shut down O/P voltage, re-power on to recovery 398.7K hrs min. MIL-HDBK-217F (25℃) 121*77*28.5mm (L*W*H) 0.43Kg;24pcs/11.3Kg/ 0.74CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature. 2. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time. 4. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:ODLV-65-SPEC 2016-12-01 O D LV- 6 5 65W PWM Output LED Driver series DIMMING OPERATION AUX-(Green) AUX+(Yellow) Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple) ACN(Blue) ACL(Brown) ※ Dimming principle for PWM style output Dimming is achieved by varying the duty cycle of the output current. ON Output DC current Duty cycle(%) = T ON T Output PWM frequency : 1KHz (±20%) OFF Io=0A ×100% T ON T ※ 2 in 1 dimming function ◎ Applying additive 0 ~ 10VDC 100% Vo+ Vo- + + - - DIM+ + Additive Voltage - Duty cycle of output current (%) 90% DIM- 80% 70% 60% 50% 40% 30% 20% 10% “DO NOT connect "DIM- to Vo- ” 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 300Hz~3KHz): 100% 90% Vo- + + - - DIM+ Additive PWM signal DIM“DO NOT connect "DIM- to Vo- ” Duty cycle of output current (%) 80% Vo+ 70% 60% 50% 40% 30% 20% 10% 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< I out<8%. 2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle. File Name:ODLV-65-SPEC 2016-12-01 O D LV- 6 5 65W PWM Output LED Driver series 100 100 80 80 60 60 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE 40 40 20 20 -20 -10 0 5 10 20 30 45 -20 (HORIZONTAL) -10 0 15 AMBIENT TEMPERATURE,Ta (℃) 30 45 75 85 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 75℃ 100 1 90 0.95 80 0.9 0.85 277V PF LOAD (%) 70 60 0.8 50 230V 0.75 40 0.7 180 200 230 260 50% 295 60% 70% 80% 90% (65W) INPUT VOLTAGE (V) LOAD ※ De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD ODLV-65 series possess superior working efficiency that up to 90% can be reached in field applications. ※ 60VModel, Tcase at 75℃ ※ 60V Model, Tcase at 75℃ 96 18 14 12 277VAC 10 230VAC 8 6 EFFICIENCY(%) 16 THD 100% 91 86 277V 81 230V 76 4 2 71 0 50% 60% 70% 80% 90% 100% 66 10% LOAD 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:ODLV-65-SPEC 2016-12-01 O D LV- 6 5 65W PWM Output LED Driver fosc : 70-150KHz BLOCK DIAGRAM AUX+(for A-Type) AUX-(for A-Type) RECTIFIERS EMI FILTER & RECTIFIERS RECTIFIERS & FILTER POWER SWITCHING Vo+ VoDIM+ DIM- CURRENT LIMIT DETECTION CIRCUIT O.L.P. PWM&PFC CONTROL MECHANICAL SPECIFICATION Case No.ODL-65A Unit:mm 121 3.5 ※Blank-Type: 3.5 200±10 77 30 tc 150±10 30 ACN(Blue) ACL(Brown) 3.5 Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple) 200±10 2*ψ4.5 3.5 : Max. Case Temperature 28.5 tc AC wire No. Assignment(AC IN) DC wire No. Assignment(DC OUT) ACN(Blue) SVT 18AWG Vo-(Black) UL1007 18AWG ACL(Brown) SVT 18AWG Vo+(Red) UL1007 18AWG DIM-(Gray) UL1007 22AWG 2.5 I/P series DIM+(Purple) UL1007 22AWG File Name:ODLV-65-SPEC 2016-12-01 O D LV- 6 5 65W PWM Output LED Driver ※A-Type: series 3.5 121 3.5 200±10 150±10 77 30 tc 150±10 30 ACN(Blue) ACL(Brown) 3.5 AUX-(Green) AUX+(Yellow) Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple) 200±10 : Max. Case Temperature 2*ψ4.5 3.5 AC wire No. Assignment(AC IN) ACN(Blue) SVT 18AWG ACL(Brown) SVT 18AWG DC wire No. Assignment(DC OUT) 2.5 28.5 tc AUX-(Green) UL1007 22AWG AUX+(Yellow) UL1007 22AWG Vo-(Black) UL1007 18AWG Vo+(Red) UL1007 18AWG DIM-(Gray) UL1007 22AWG DIM+(Purple) UL1007 22AWG Recommend Mounting Direction Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:ODLV-65-SPEC 2016-12-01