AZ956 MICROMINIATURE POLARIZED RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • Meets FCC Part 68.302 1500 V lightning surge • Low power consumption: 36 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 • All plastics meet UL94 V–O, 30 min. oxygen index CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1.0 A Max. switched voltage: 150 VDC or 125 VAC Rated Load UL, CUR 0.5 A at 120 VAC 1.0 A at 30 VDC Material Palladium nickel with gold-rhodium overlay Resistance < 50 milliohms initally (6 V, 10 mA method) COIL (Polarized) Power At Pickup Voltage (typical) 36 mW Life Expectancy Mechanical Electrical Minimum operations 1 x 109 2.5 x 105 at 0.4 A, 125 VAC, resistive 3 x 106 at 1.0 A, 24 VDC, resistive Operate Time (typical) 1 ms at nominal coil voltage Release Time (typical) 0.4 ms at nominal coil voltage (with no coil suppression) Bounce (typical) At 10 mA contact current 1 ms at operate or release Dielectric Strength (at sea level) 1500 Vrms contact to coil 500 Vrms between open contacts Dropout Greater than 10% of nominal coil voltage Insulation Resistance 109 ohms min. at 25°C, 500 VDC, 50% RH Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration Operational, 40 g, 10–200 Hz Max. Continuous Dissipation 0.5 W at 20°C (68°F) Temperature Rise At nominal coil voltage 8°C (15°F) Shock Operational, 50 g min., 11 ms Non-destructive, 150 g min., 11 ms Max. 105°C (221°F) Max. Solder Temp. Temp./Time Vapor phase: 215°C, 40 Sec. Infrared: 215°C, 40 Sec. Double wave: 260°C, 10 Sec. Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 1.8 grams Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-13 AZ956 RELAY ORDERING DATA STANDARD RELAYS Nominal Coil VDC 1.5 Order Number Max. Continuous VDC THT SMT 4.5 4.0 Coil Resistance ± 10% THT SMT 36 28 137 Must Operate VDC 1.13 THT Through Hole AZ956–1.5DE 113 2.25 AZ956–3DE AZ956S–3DE SMT AZ956S–1.5DE 3 8.8 8.0 5 14.5 13.3 370 313 3.75 AZ956–5DE AZ956S–5DE 9 12 25.5 35.0 23.9 35.0 1,165 2,250 1,013 1,800 6.75 9.00 AZ956–9DE AZ956–12DE AZ956S–9DE AZ956S–12DE 15 42.0 42.0 3,100 2,813 11.30 AZ956–15DE AZ956S–15DE 24 50.0 50.0 4,500 4,500 18.00 AZ956–24DE AZ956S–24DE MECHANICAL DATA SMT THT PC BOARD LAYOUT PC BOARD LAYOUT Viewed toward terminals Viewed toward terminals Wiring Diagram Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-13