Special Color - White LR5169 LRC Surface Mount CHIP LEDs Approval Sheet Model No.: LR5169 11/10/2010 Preliminary Page 1/5 Special Color - White LR5169 INTRODUCTION ............................................................................................................................. 3 PRODUCT SPECIFICATION ......................................................................................................... 4 ATTENTION: ELECTRICSTATIC DISCHARGE (ESD) PROTECTION............................................... 4 PRODUCT SPECIFICATION ......................................................................................................... 5 ELECTRO-OPTICAL CHARACTERISTICS ..................................................................................... 5 PACKAGE OUTLINE DIMENSION ................................................................................................ 5 ABSOLUTE MAXIMUM RATINGS ................................................................................................ 5 Official Product LRC PN.. LR5169 Your Part No. Data Sheet No. Tentative Product Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, and company confidential all rights reserved. 11/10/2010 Preliminary Page 2/5 Special Color - White LR5169 Introduction � The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by LRC for any infringements of intellectual property or other rights of the third parties which may result from it use. � LRC is continually effort to improve the quality of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing LRC products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such LRC products cause loss of human life, bodily injury or damage to property. � The LRC products listed in this document are intended for usage in general electronics (computer, personal equipment, office equipment, industrial robotics, domestic, etc…) These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. � In developing your designs, please ensure that LRC products are used within specified operating ranges as set forth in the most recent LRC products specifications. � Also, please keep in mind the precautions listed in this document. Official Product LRC PN.. LR5169 Your Part No. Data Sheet No. Tentative Product Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, and company confidential all rights reserved. 11/10/2010 Preliminary Page 3/5 Special Color - White LR5169 Product Specification Specification Iv Material Quantity 2000 mcd above O @20mA/ Ta= 25 C Tolerance: + 10% Correlated Color Refer to page 7~8 Temperature @20mA/ Ta= 25 C Vf 2.9-3.7V (0.1V/bin) O O @20mA Ta= 25 C Tolerance: + 0.05V Ir < 100 µA @ VR = 5 V Resin Yellow Carrier tape According to EIA 481-1A specs Conductive black tape Reel According to EIA 481-1A specs Conductive black Label HT standard Paper Packing bag 220x240mm Aluminum laminated bag/ no-zipper One reel one bag Carton HT standard Paper Non-specified Epoxy resin 2000pcs per reel Others: Every mid-box will be loaded 5 reels. These 5 reels can be different in lot, Iv, lambda, or Vf. Every reel will have an independent label to identify its specification and the mid-box there will have a corresponding label post on it. ATTENTION: Electricstatic Discharge (ESD) protection The symbol shown on the page herein to introduce ‘Electro-Optical Characteristics’. ESD protection for GaP and AlGaAs based chips is still necessary even though they are safe in low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD protection has to considered and taken in the initial design stage. If manual work/process is needed, please ensure the device is well protected from ESD during all the process. Official Product LRC PN.. LR5169 Your Part No. Data Sheet No. Tentative Product Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, and company confidential all rights reserved. 11/10/2010 Preliminary Page 4/5 Special Color - White LR5169 Product Specification Electro-Optical Characteristics (IF @ 20mA, Ta 25 oC) VF(V) Product No. Lighting Color LR5169 White * Color IV (mcd) Material InGaN min max 2.9 3.7 Correlated Color Temperature(K) Typ 5500~6500K min Typ 2000 2200 Package Outline Dimension Unit: mm Tolerance: +/-0.1 Outline Dimension： Unit: mm Soldering terminals may shift in x, y direction. Absolute Maximum Ratings o (Ta 25 C) Series LR5169 Pd (mW) IF (mA) IFP (mA) Ir (µA) @ VR = 5 V TOP (oC) TST (oC) 111 30 100** <1µA -30~+80 -40~+85 IFP** Condition for IFP is pulse of 1/10 duty and 0.1msec width. Official Product LRC PN.. LR5169 Your Part No. Data Sheet No. Tentative Product Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, and company confidential all rights reserved. 11/10/2010 Preliminary Page 5/5