Murata DLP11SN201HL2L Common mode choke coil film type dlp11s/dlp11t series (0504 size) Datasheet

Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type
Data Sheet
1
Common Mode Choke Coil
Film Type
DLP11S/DLP11T Series (0504 Size)
■ Dimensions
■ Dimensions
DLP11S Series
DLP11T Series
(1)
(3)
(4)
(3)
(4)
(2)
0.55±0.1
0.55±0.1
(2)
1.0±0.1
(1)
0.3±0.1
1.0±0.1
0.82±0.1
0.3±0.05
0.3±0.1
0.25+0.1
–0.05
0.25+0.1
–0.05
: Electrode
1.25±0.1
1.25±0.1
: Electrode
(in mm)
(in mm)
■ Equivalent Circuit
(1)
(2)
(4)
(3)
No polarity.
■ Impedance-Frequency Characteristics (Main Items)
■ Impedance-Frequency Characteristics (Main Items)
DLP11SN Series
DLP11SA Series
1000
10000
Common mode
DLP11SN331HL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN201HL2
DLP11SN161SL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2
100
10
1
1
10
Common mode
100
Impedance (Ω)
Impedance (Ω)
1000
DLP11SN331HL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN201HL2
DLP11SN161SL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2
Differential mode
100
Frequency (MHz)
1000
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
10
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
Differential mode
1
10000
1
10
100
Frequency (MHz)
1000
10000
Continued on the following page.
o This data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.5.12
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type
Data Sheet
2
Continued from the preceding page.
■ Impedance-Frequency Characteristics (Main Items)
DLP11TB Series
1000
Common Mode
100
Impedance (Ω)
DLP11TB800UL2
DLP11TB800UL2
10
Differential Mode
1
1
10
100
Frequency (MHz)
1000
10000
■ Differential Mode Transmission Characteristics (Typ.)
■ Differential Mode Transmission Characteristics (Typ.)
DLP11SN Series
DLP11SA Series
0
0
2
2
DLP11SA900HL2
Insertion Loss (dB)
Insertion Loss (dB)
DLP11SN900HL2
4
6
8
4
6
8
10
10
1
10
100
Frequency (MHz)
1000
10000
■ Differential Mode Transmission Characteristics (Typ.)
DLP11TB Series
0
DLP11TB800UL2
1
10
100
Frequency (MHz)
1000
10000
■ Packaging
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
5000(DLP11T), 3000(DLP11S)
B
Bulk(Bag)
500
Insertion Loss (dB)
2
4
6
8
10
1
10
100
Frequency (MHz)
1000
10000
Continued on the following page.
o This data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.5.12
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type
Data Sheet
3
Continued from the preceding page.
■ Rated Value (p: packaging code)
Part Number
Common Mode Impedance
(at 100MHz/20°C)
Rated Current Rated Voltage
Insulation Resistance (min.)
Withstand Voltage
DC Resistance
Operating
Temperature Range
DLP11SN670SL2p
67ohm ±20%
180mA
5Vdc
100M ohm
12.5Vdc
1.3ohm±25%
-40 to +85°C
DLP11SN121SL2p
120ohm ±20%
140mA
5Vdc
100M ohm
12.5Vdc
2.0ohm±25%
-40 to +85°C
DLP11SN161SL2p
160ohm ±20%
120mA
5Vdc
100M ohm
12.5Vdc
2.7ohm±25%
-40 to +85°C
DLP11SN900HL2p
90ohm ±20%
150mA
5Vdc
100M ohm
12.5Vdc
1.5ohm±25%
-40 to +85°C
DLP11SN201HL2p
200ohm ±20%
110mA
5Vdc
100M ohm
12.5Vdc
3.1ohm±25%
-40 to +85°C
DLP11SN241HL2p
240ohm ±20%
100mA
5Vdc
100M ohm
12.5Vdc
3.5ohm±25%
-40 to +85°C
DLP11SN281HL2p
280ohm ±20%
90mA
5Vdc
100M ohm
12.5Vdc
4.2ohm±25%
-40 to +85°C
DLP11SN331HL2p
330ohm ±20%
80mA
5Vdc
100M ohm
12.5Vdc
4.9ohm±25%
-40 to +85°C
DLP11SA350HL2p
35ohm ±20%
170mA
5Vdc
100M ohm
12.5Vdc
0.9ohm±25%
-40 to +85°C
DLP11SA670HL2p
67ohm ±20%
150mA
5Vdc
100M ohm
12.5Vdc
1.2ohm±25%
-40 to +85°C
DLP11SA900HL2p
90ohm ±20%
150mA
5Vdc
100M ohm
12.5Vdc
1.4ohm±25%
-40 to +85°C
DLP11TB800UL2p
80ohm ±25%
100mA
5Vdc
100M ohm
12.5Vdc
1.5ohm±25%
-40 to +85°C
Number of Circuit: 1
Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz: -40dB (typ./DLP11TB800UL2)
Impedance Characteristics between signal lines Z0 (TDR at 50ps): 90ohm±15ohm (DLP11TB800UL2)
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.5.12
http://www.murata.com/
Similar pages